1/*
2 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra72x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/interrupt-controller/irq.h>
13#include "dra7-mmc-iodelay.dtsi"
14#include "dra72x-mmc-iodelay.dtsi"
15#include "am57xx-idk-common.dtsi"
16
17/ {
18	model = "TI AM5718 IDK";
19	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
20
21	memory@80000000 {
22		device_type = "memory";
23		reg = <0x0 0x80000000 0x0 0x40000000>;
24	};
25
26	leds {
27		compatible = "gpio-leds";
28		cpu0-led {
29			label = "status0:red:cpu0";
30			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
31			default-state = "off";
32			linux,default-trigger = "cpu0";
33		};
34
35		usr0-led {
36			label = "status0:green:usr";
37			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
38			default-state = "off";
39		};
40
41		heartbeat-led {
42			label = "status0:blue:heartbeat";
43			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
44			default-state = "off";
45			linux,default-trigger = "heartbeat";
46		};
47
48		usr1-led {
49			label = "status1:red:usr";
50			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
51			default-state = "off";
52		};
53
54		usr2-led {
55			label = "status1:green:usr";
56			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
57			default-state = "off";
58		};
59
60		mmc0-led {
61			label = "status1:blue:mmc0";
62			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
63			default-state = "off";
64			linux,default-trigger = "mmc0";
65		};
66	};
67};
68
69&extcon_usb2 {
70	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
71	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
72};
73
74&mailbox5 {
75	status = "okay";
76	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
77		status = "okay";
78	};
79	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
80		status = "okay";
81	};
82};
83
84&mailbox6 {
85	status = "okay";
86	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
87		status = "okay";
88	};
89};
90
91&pcie1_rc {
92	status = "okay";
93	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
94};
95
96&pcie1_ep {
97	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
98};
99
100&mmc1 {
101	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
102	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
103	pinctrl-1 = <&mmc1_pins_hs>;
104	pinctrl-2 = <&mmc1_pins_sdr12>;
105	pinctrl-3 = <&mmc1_pins_sdr25>;
106	pinctrl-4 = <&mmc1_pins_sdr50>;
107	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
108	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
109};
110
111&mmc2 {
112	pinctrl-names = "default", "hs", "ddr_3_3v";
113	pinctrl-0 = <&mmc2_pins_default>;
114	pinctrl-1 = <&mmc2_pins_hs>;
115	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
116};
117
118&cpu0 {
119	vdd-supply = <&smps12_reg>;
120};
121