1USB OHCI controllers
2
3Required properties:
4- compatible : "generic-ohci"
5- reg : ohci controller register range (address and length)
6- interrupts : ohci controller interrupt
7
8Optional properties:
9- big-endian-regs : boolean, set this for hcds with big-endian registers
10- big-endian-desc : boolean, set this for hcds with big-endian descriptors
11- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
12- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
13- remote-wakeup-connected: remote wakeup is wired on the platform
14- num-ports : u32, to override the detected port count
15- clocks : a list of phandle + clock specifier pairs
16- phys : see usb-hcd.txt in the current directory
17- resets : a list of phandle + reset specifier pairs
18
19additionally the properties from usb-hcd.txt (in the current directory) are
20supported.
21
22Example:
23
24	ohci0: usb@1c14400 {
25		compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
26		reg = <0x01c14400 0x100>;
27		interrupts = <64>;
28		clocks = <&usb_clk 6>, <&ahb_gates 2>;
29		phys = <&usbphy 1>;
30		phy-names = "usb";
31	};
32