1* Allwinner A10 I2S controller
2
3The I2S bus (Inter-IC sound bus) is a serial link for digital
4audio data transfer between devices in the system.
5
6Required properties:
7
8- compatible: should be one of the following:
9   - "allwinner,sun4i-a10-i2s"
10   - "allwinner,sun6i-a31-i2s"
11   - "allwinner,sun8i-a83t-i2s"
12   - "allwinner,sun8i-h3-i2s"
13- reg: physical base address of the controller and length of memory mapped
14  region.
15- interrupts: should contain the I2S interrupt.
16- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
17	Documentation/devicetree/bindings/dma/dma.txt
18- dma-names: should include "tx" and "rx".
19- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
20- clock-names: should contain the following:
21   - "apb" : clock for the I2S bus interface
22   - "mod" : module clock for the I2S controller
23- #sound-dai-cells : Must be equal to 0
24
25Required properties for the following compatibles:
26	- "allwinner,sun6i-a31-i2s"
27	- "allwinner,sun8i-a83t-i2s"
28	- "allwinner,sun8i-h3-i2s"
29- resets: phandle to the reset line for this codec
30
31Example:
32
33i2s0: i2s@1c22400 {
34	#sound-dai-cells = <0>;
35	compatible = "allwinner,sun4i-a10-i2s";
36	reg = <0x01c22400 0x400>;
37	interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
38	clocks = <&apb0_gates 3>, <&i2s0_clk>;
39	clock-names = "apb", "mod";
40	dmas = <&dma SUN4I_DMA_NORMAL 3>,
41	       <&dma SUN4I_DMA_NORMAL 3>;
42	dma-names = "rx", "tx";
43};
44