1Intersil ISL1219 I2C RTC/Alarm chip with event in
2
3ISL1219 has additional pins EVIN and #EVDET for tamper detection.
4
5Required properties supported by the device:
6
7 - "compatible": must be "isil,isl1219"
8 - "reg": I2C bus address of the device
9
10Optional properties:
11
12 - "interrupt-names": list which may contains "irq" and "evdet"
13 - "interrupts": list of interrupts for "irq" and "evdet"
14 - "isil,ev-evienb": if present EV.EVIENB bit is set to the specified
15                     value for proper operation.
16
17
18Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12
19 and #EVDET pin connected to SoC gpio2 pin 24:
20
21	isl1219: rtc@68 {
22		compatible = "isil,isl1219";
23		reg = <0x68>;
24		interrupt-names = "irq", "evdet";
25		interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
26			<&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
27		isil,ev-evienb = <1>;
28	};
29
30