1Qualcomm AOSS Reset Controller
2======================================
3
4This binding describes a reset-controller found on AOSS-CC (always on subsystem)
5for Qualcomm SDM845 SoCs.
6
7Required properties:
8- compatible:
9	Usage: required
10	Value type: <string>
11	Definition: must be:
12		    "qcom,sdm845-aoss-cc"
13
14- reg:
15	Usage: required
16	Value type: <prop-encoded-array>
17	Definition: must specify the base address and size of the register
18	            space.
19
20- #reset-cells:
21	Usage: required
22	Value type: <uint>
23	Definition: must be 1; cell entry represents the reset index.
24
25Example:
26
27aoss_reset: reset-controller@c2a0000 {
28	compatible = "qcom,sdm845-aoss-cc";
29	reg = <0xc2a0000 0x31000>;
30	#reset-cells = <1>;
31};
32
33Specifying reset lines connected to IP modules
34==============================================
35
36Device nodes that need access to reset lines should
37specify them as a reset phandle in their corresponding node as
38specified in reset.txt.
39
40For list of all valid reset indicies see
41<dt-bindings/reset/qcom,sdm845-aoss.h>
42
43Example:
44
45modem-pil@4080000 {
46	...
47
48	resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
49	reset-names = "mss_restart";
50
51	...
52};
53