1Freescale i.MX7 System Reset Controller
2======================================
3
4Please also refer to reset.txt in this directory for common reset
5controller binding usage.
6
7Required properties:
8- compatible: Should be "fsl,imx7-src", "syscon"
9- reg: should be register base and length as documented in the
10  datasheet
11- interrupts: Should contain SRC interrupt
12- #reset-cells: 1, see below
13
14example:
15
16src: reset-controller@30390000 {
17     compatible = "fsl,imx7d-src", "syscon";
18     reg = <0x30390000 0x2000>;
19     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
20     #reset-cells = <1>;
21};
22
23
24Specifying reset lines connected to IP modules
25==============================================
26
27The system reset controller can be used to reset various set of
28peripherals. Device nodes that need access to reset lines should
29specify them as a reset phandle in their corresponding node as
30specified in reset.txt.
31
32Example:
33
34	pcie: pcie@33800000 {
35
36		...
37
38		resets = <&src IMX7_RESET_PCIEPHY>,
39			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
40		reset-names = "pciephy", "apps";
41
42		...
43        };
44
45
46For list of all valid reset indicies see
47<dt-bindings/reset/imx7-reset.h>
48