1* MediaTek's I2C controller
2
3The MediaTek's I2C controller is used to interface with I2C devices.
4
5Required properties:
6  - compatible: value should be either of the following.
7      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
8      "mediatek,mt2712-i2c": for MediaTek MT2712
9      "mediatek,mt6577-i2c": for MediaTek MT6577
10      "mediatek,mt6589-i2c": for MediaTek MT6589
11      "mediatek,mt7622-i2c": for MediaTek MT7622
12      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
13      "mediatek,mt8173-i2c": for MediaTek MT8173
14  - reg: physical base address of the controller and dma base, length of memory
15    mapped region.
16  - interrupts: interrupt number to the cpu.
17  - clock-div: the fixed value for frequency divider of clock source in i2c
18    module. Each IC may be different.
19  - clocks: clock name from clock manager
20  - clock-names: Must include "main" and "dma", if enable have-pmic need include
21    "pmic" extra.
22
23Optional properties:
24  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
25    is 100000.
26  - mediatek,have-pmic: platform can control i2c form special pmic side.
27    Only mt6589 and mt8135 support this feature.
28  - mediatek,use-push-pull: IO config use push-pull mode.
29
30Example:
31
32	i2c0: i2c@1100d000 {
33			compatible = "mediatek,mt6577-i2c";
34			reg = <0x1100d000 0x70>,
35			      <0x11000300 0x80>;
36			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
37			clock-frequency = <400000>;
38			mediatek,have-pmic;
39			clock-div = <16>;
40			clocks = <&i2c0_ck>, <&ap_dma_ck>;
41			clock-names = "main", "dma";
42	};
43
44