1Broadcom V3D GPU
2
3Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
4For V3D 2.x, see brcm,bcm-vc4.txt.
5
6Required properties:
7- compatible:	Should be "brcm,7268-v3d" or "brcm,7278-v3d"
8- reg:		Physical base addresses and lengths of the register areas
9- reg-names:	Names for the register areas.  The "hub", "bridge", and "core0"
10		  register areas are always required.  The "gca" register area
11		  is required if the GCA cache controller is present.
12- interrupts:	The interrupt numbers.  The first interrupt is for the hub,
13		  while the following interrupts are for the cores.
14		  See bindings/interrupt-controller/interrupts.txt
15
16Optional properties:
17- clocks:	The core clock the unit runs on
18
19v3d {
20	compatible = "brcm,7268-v3d";
21	reg = <0xf1204000 0x100>,
22	      <0xf1200000 0x4000>,
23	      <0xf1208000 0x4000>,
24	      <0xf1204100 0x100>;
25	reg-names = "bridge", "hub", "core0", "gca";
26	interrupts = <0 78 4>,
27		     <0 77 4>;
28};
29