1Sitronix ST7789V RGB panel with SPI control bus
2
3Required properties:
4  - compatible: "sitronix,st7789v"
5  - reg: Chip select of the panel on the SPI bus
6  - reset-gpios: a GPIO phandle for the reset pin
7  - power-supply: phandle of the regulator that provides the supply voltage
8
9Optional properties:
10  - backlight: phandle to the backlight used
11
12The generic bindings for the SPI slaves documented in [1] also applies
13
14The device node can contain one 'port' child node with one child
15'endpoint' node, according to the bindings defined in [2]. This
16node should describe panel's video bus.
17
18[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
19[2]: Documentation/devicetree/bindings/graph.txt
20
21Example:
22
23panel@0 {
24	compatible = "sitronix,st7789v";
25	reg = <0>;
26	reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
27	backlight = <&pwm_bl>;
28	spi-max-frequency = <100000>;
29	spi-cpol;
30	spi-cpha;
31
32	port {
33		panel_input: endpoint {
34			remote-endpoint = <&tcon0_out_panel>;
35		};
36	};
37};
38