1Simple display panel
2====================
3
4panel node
5----------
6
7Required properties:
8- power-supply: See panel-common.txt
9
10Optional properties:
11- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
12- enable-gpios: GPIO pin to enable or disable the panel
13- backlight: phandle of the backlight device attached to the panel
14
15Example:
16
17	panel: panel {
18		compatible = "cptt,claa101wb01";
19		ddc-i2c-bus = <&panelddc>;
20
21		power-supply = <&vdd_pnl_reg>;
22		enable-gpios = <&gpio 90 0>;
23
24		backlight = <&backlight>;
25	};
26