1JDI model LT070ME05000 1200x1920 7" DSI Panel
2
3Required properties:
4- compatible: should be "jdi,lt070me05000"
5- vddp-supply: phandle of the regulator that provides the supply voltage
6  Power IC supply (3-5V)
7- iovcc-supply: phandle of the regulator that provides the supply voltage
8  IOVCC , power supply for LCM (1.8V)
9- enable-gpios: phandle of gpio for enable line
10  LED_EN, LED backlight enable, High active
11- reset-gpios: phandle of gpio for reset line
12  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
13  XRES, Reset, Low active
14- dcdc-en-gpios: phandle of the gpio for power ic line
15  Power IC supply enable, High active
16
17Example:
18
19	dsi0: qcom,mdss_dsi@4700000 {
20		panel@0 {
21			compatible = "jdi,lt070me05000";
22			reg = <0>;
23
24			vddp-supply = <&pm8921_l17>;
25			iovcc-supply = <&pm8921_lvs7>;
26
27			enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
28			reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
29			dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
30		};
31	};
32