1* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit
2
3The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and
4supplies clock to various controllers within the SoC.
5
6Required Properties:
7
8- compatible: must be one of:
9	- "amlogic,meson8-clkc" for Meson8 (S802) SoCs
10	- "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
11	- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
12- reg: it must be composed by two tuples:
13	0) physical base address of the xtal register and length of memory
14	   mapped region.
15	1) physical base address of the clock controller and length of memory
16	   mapped region.
17
18- #clock-cells: should be 1.
19- #reset-cells: should be 1.
20
21Each clock is assigned an identifier and client nodes can use this identifier
22to specify the clock which they consume. All available clocks are defined as
23preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
24used in device tree sources.
25
26Similarly a preprocessor macro for each reset line is defined in
27dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
28device tree sources).
29
30
31Example: Clock controller node:
32
33	clkc: clock-controller@c1104000 {
34		compatible = "amlogic,meson8b-clkc";
35		reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
36		#clock-cells = <1>;
37		#reset-cells = <1>;
38	};
39
40
41Example: UART controller node that consumes the clock generated by the clock
42  controller:
43
44	uart_AO: serial@c81004c0 {
45		compatible = "amlogic,meson-uart";
46		reg = <0xc81004c0 0x14>;
47		interrupts = <0 90 1>;
48		clocks = <&clkc CLKID_CLK81>;
49	};
50