| /Linux-v6.1/include/dt-bindings/pinctrl/ |
| D | k210-fpioa.h | 80 #define K210_PCF_UART2_RX 66 /* UART2 Receiver */
81 #define K210_PCF_UART2_TX 67 /* UART2 Transmitter */
176 #define K210_PCF_UART2_CTS 162 /* UART2 Clear To Send */
177 #define K210_PCF_UART2_DSR 163 /* UART2 Data Set Ready */
178 #define K210_PCF_UART2_DCD 164 /* UART2 Data Carrier Detect */
179 #define K210_PCF_UART2_RI 165 /* UART2 Ring Indicator */
180 #define K210_PCF_UART2_SIR_IN 166 /* UART2 Serial Infrared Input */
181 #define K210_PCF_UART2_DTR 167 /* UART2 Data Terminal Ready */
182 #define K210_PCF_UART2_RTS 168 /* UART2 Request To Send */
183 #define K210_PCF_UART2_OUT2 169 /* UART2 User-designated Output 2 */
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/pinctrl/ |
| D | pinctrl-sirf.txt | 29 uart2_pins_a: uart2@0 {
32 sirf,function = "uart2";
35 uart2_noflow_pins_a: uart2@1 {
42 For a specific board, if it wants to use uart2 without hardware flow control,
44 uart2: uart@b0070000 {
|
| D | marvell,dove-pinctrl.txt | 18 mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm), pmu*
19 mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm), pmu*
20 mpp2 2 gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
22 mpp3 3 gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
33 mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd),
35 mpp13 13 gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
37 mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd), pmu*
38 mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm), pmu*
|
| D | cirrus,lochnagar.yaml | 101 dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
102 gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1,
134 dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
135 gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx,
|
| D | marvell,armada-xp-pinctrl.txt | 61 mpp40 40 gpio, spi0(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0),
63 mpp41 41 gpio, spi0(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
65 mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm(timer)
66 mpp43 43 gpio, uart2(txd), uart0(rts), spi0(cs3), pcie(rstout),
68 mpp44 44 gpio, uart2(cts), uart3(rxd), spi0(cs4), pcie(clkreq2),
70 mpp45 45 gpio, uart2(rts), uart3(txd), spi0(cs5), sata1(prsnt),
|
| D | microchip,pic32-pinctrl.txt | 40 uart2-tx {
46 uart2-rx {
55 uart2: serial@1f822200 {
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | lpc4337-ciaa.dts | 24 serial0 = &uart2;
30 stdout-path = &uart2;
135 uart2_pins: uart2-pins {
138 function = "uart2";
145 function = "uart2";
211 &uart2 {
|
| D | uniphier-pinctrl.dtsi | 184 pinctrl_uart2: uart2 {
185 groups = "uart2";
186 function = "uart2";
|
| D | rda8810pl-orangepi-2g-iot.dts | 17 serial1 = &uart2;
42 &uart2 {
|
| D | rda8810pl-orangepi-i96.dts | 16 serial0 = &uart2;
42 &uart2 {
|
| D | artpec6-devboard.dts | 14 serial2 = &uart2;
36 &uart2 {
|
| /Linux-v6.1/drivers/pinctrl/mvebu/ |
| D | pinctrl-ac5.c | 42 MPP_FUNCTION(4, "uart2", "txd")),
48 MPP_FUNCTION(4, "uart2", "rxd")),
100 MPP_FUNCTION(2, "uart2", "rxd"),
105 MPP_FUNCTION(2, "uart2", "txd")),
125 MPP_FUNCTION(2, "uart2", "txd"),
130 MPP_FUNCTION(2, "uart2", "rxd"),
202 MPP_FUNCTION(4, "uart2", "txd"),
209 MPP_FUNCTION(4, "uart2", "rxd"),
|
| /Linux-v6.1/arch/mips/boot/dts/ingenic/ |
| D | cu1000-neo.dts | 14 serial2 = &uart2;
61 &uart2 {
186 pins_uart2: uart2 {
187 function = "uart2";
188 groups = "uart2-data-d";
|
| /Linux-v6.1/arch/mips/boot/dts/mscc/ |
| D | jaguar2.dtsi | 13 serial1 = &uart2;
85 uart2: serial@70100800 { label
110 uart2_pins: uart2-pins {
112 function = "uart2";
|
| D | serval.dtsi | 84 uart2: serial@70100800 { label
119 uart2_pins: uart2-pins {
121 function = "uart2";
|
| /Linux-v6.1/arch/arm/mach-s3c/ |
| D | irq-s3c24xx.c | 665 { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
691 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
692 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
693 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
734 { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
787 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
788 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
789 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
836 { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
862 { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
[all …]
|
| /Linux-v6.1/arch/mips/boot/dts/pic32/ |
| D | pic32mzda_sk.dts | 75 &uart2 {
117 uart2-tx {
123 uart2-rx {
|
| /Linux-v6.1/arch/arm64/boot/dts/bitmain/ |
| D | bm1880-sophon-edge.dts | 39 serial1 = &uart2;
160 pinctrl_uart2_default: pinctrl-uart2-default {
163 function = "uart2";
180 &uart2 {
|
| /Linux-v6.1/arch/arm/mach-mmp/ |
| D | pxa910.c | 124 * UART2/3 - Fast UART
129 * pxa910_device_uart1 - UART2 as FFUART
134 PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
135 PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
|
| /Linux-v6.1/arch/arm64/boot/dts/mediatek/ |
| D | mt7986a-rfb.dts | 112 &uart2 {
133 uart2_pins: uart2-pins {
136 groups = "uart2";
|
| /Linux-v6.1/Documentation/devicetree/bindings/arm/marvell/ |
| D | cp110-system-controller.txt | 99 mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pcl…
102 mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sa…
128 mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), g…
129 mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(m…
141 mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
142 mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
152 mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), s…
153 …, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(presen…
|
| /Linux-v6.1/arch/arm64/boot/dts/sprd/ |
| D | sc9836-openphone.dts | 21 serial2 = &uart2;
43 &uart2 {
|
| /Linux-v6.1/drivers/net/wireless/ralink/rt2x00/ |
| D | rt2500pci.h | 133 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
134 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
135 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
136 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
137 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
180 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
181 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
182 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
183 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
184 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
[all …]
|
| /Linux-v6.1/drivers/pinctrl/sunxi/ |
| D | pinctrl-sun50i-h616.c | 276 SUNXI_FUNCTION(0x2, "uart2"), /* TX */
282 SUNXI_FUNCTION(0x2, "uart2"), /* RX */
288 SUNXI_FUNCTION(0x2, "uart2"), /* RTS */
294 SUNXI_FUNCTION(0x2, "uart2"), /* CTS */
341 SUNXI_FUNCTION(0x2, "uart2"), /* TX */
349 SUNXI_FUNCTION(0x2, "uart2"), /* RX */
357 SUNXI_FUNCTION(0x2, "uart2"), /* RTS */
365 SUNXI_FUNCTION(0x2, "uart2"), /* CTS */
427 SUNXI_FUNCTION(0x3, "uart2"), /* TX */
435 SUNXI_FUNCTION(0x3, "uart2"), /* RX */
[all …]
|
| /Linux-v6.1/arch/arm64/boot/dts/realtek/ |
| D | rtd1619-mjolnir.dts | 27 serial2 = &uart2;
42 &uart2 {
|
