| /Linux-v5.15/drivers/media/usb/gspca/gl860/ |
| D | gl860-mi2020.c | 12 static u8 dat_wbal1[] = {0x8c, 0xa2, 0x0c};
14 static u8 dat_bright1[] = {0x8c, 0xa2, 0x06};
15 static u8 dat_bright3[] = {0x8c, 0xa1, 0x02};
16 static u8 dat_bright4[] = {0x90, 0x00, 0x0f};
17 static u8 dat_bright5[] = {0x8c, 0xa1, 0x03};
18 static u8 dat_bright6[] = {0x90, 0x00, 0x05};
20 static u8 dat_hvflip1[] = {0x8c, 0x27, 0x19};
21 static u8 dat_hvflip3[] = {0x8c, 0x27, 0x3b};
22 static u8 dat_hvflip5[] = {0x8c, 0xa1, 0x03};
23 static u8 dat_hvflip6[] = {0x90, 0x00, 0x06};
[all …]
|
| D | gl860-ov9655.c | 12 {0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1},
13 {0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d},
15 {0x0040, 0x0000},
19 {0x0041, 0x0000}, {0x006a, 0x0007}, {0x0063, 0x0006}, {0x006a, 0x000d},
20 {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, {0x0041, 0x00c2},
21 {0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, {0x0040, 0x0000},
22 {0x00f3, 0x0006}, {0x0058, 0x0000}, {0x0048, 0x0000}, {0x0061, 0x0000},
47 "\x82\x60\x83\x6c\x84\x78\x85\x8c" "\x86\x9e\x87\xbb\x88\xd2\x89\xe5"
48 "\x8a\x23\x8c\x8d\x90\x7c\x91\x7b"
80 "\x82\x60\x83\x6c\x84\x78\x85\x8c" "\x86\x9e\x87\xbb\x88\xd2\x89\xe5"
[all …]
|
| /Linux-v5.15/drivers/media/dvb-frontends/ |
| D | af9033_priv.h | 65 0x01, 0xce, 0x55, 0xc9, 0x00, 0xe7, 0x2a, 0xe4, 0x00, 0x73,
66 0x99, 0x0f, 0x00, 0x73, 0x95, 0x72, 0x00, 0x73, 0x91, 0xd5,
67 0x00, 0x39, 0xca, 0xb9, 0x00, 0xe7, 0x2a, 0xe4, 0x00, 0x73,
68 0x95, 0x72, 0x37, 0x02, 0xce, 0x01 }
71 0x01, 0x94, 0x8b, 0x10, 0x00, 0xca, 0x45, 0x88, 0x00, 0x65,
72 0x25, 0xed, 0x00, 0x65, 0x22, 0xc4, 0x00, 0x65, 0x1f, 0x9b,
73 0x00, 0x32, 0x91, 0x62, 0x00, 0xca, 0x45, 0x88, 0x00, 0x65,
74 0x22, 0xc4, 0x88, 0x02, 0x95, 0x01 }
77 0x01, 0x5a, 0xc0, 0x56, 0x00, 0xad, 0x60, 0x2b, 0x00, 0x56,
78 0xb2, 0xcb, 0x00, 0x56, 0xb0, 0x15, 0x00, 0x56, 0xad, 0x60,
[all …]
|
| /Linux-v5.15/drivers/isdn/mISDN/ |
| D | dsp_tones.c | 45 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
46 0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
47 0xdc, 0xfc, 0x6c,
48 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
49 0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
50 0xdc, 0xfc, 0x6c,
51 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
52 0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
53 0xdc, 0xfc, 0x6c,
54 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
[all …]
|
| /Linux-v5.15/crypto/ |
| D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key)
101 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When
248 "\xed\xa3\x6b\xc9\x29\xee\xb2\x2c\x80\xc3\x39\x3b\x8c\x62\x45\x72"
269 "\x8C\x33\xE4\x36\xB8\x43\xEB\x19\x2A\x81\x8D\xDE\x81\x0A\x99\x48"
271 "\x59\x9F\x45\xE8\x5D\x1A\x45\x76\x04\x56\x05\xA1\xD0\x1B\x8C\x77"
296 "\xA7\x1D\xD9\x1E\x06\xCD\xE8\xBA\x2C\x8C\x69\x32\xEA\xBE\x60\x71"
333 "\x8C\x33\xE4\x36\xB8\x43\xEB\x19\x2A\x81\x8D\xDE\x81\x0A\x99\x48"
335 "\x59\x9F\x45\xE8\x5D\x1A\x45\x76\x04\x56\x05\xA1\xD0\x1B\x8C\x77"
376 "\xCC\x6B\x97\x70\x8C\xBC\xA5\x06\x31\x0C\xD4\x2F\xD5\x7D\x26\x24"
413 "\xEF\xBB\x74\x8B\xA8\x6E\x8C\x08\xC6\xC7\x4F\x0C\xBC\x79\xC6\xEF"
[all …]
|
| /Linux-v5.15/drivers/media/tuners/ |
| D | fc2580_priv.h | 23 {0x00, 0x00},
24 {0x12, 0x86},
25 {0x14, 0x5c},
26 {0x16, 0x3c},
27 {0x1f, 0xd2},
28 {0x09, 0xd7},
29 {0x0b, 0xd5},
30 {0x0c, 0x32},
31 {0x0e, 0x43},
32 {0x21, 0x0a},
[all …]
|
| /Linux-v5.15/fs/nls/ |
| D | nls_cp932.c | 17 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x00-0x07 */
18 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x08-0x0F */
19 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x10-0x17 */
20 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x18-0x1F */
21 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x20-0x27 */
22 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x28-0x2F */
23 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x30-0x37 */
24 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x38-0x3F */
25 0x3000,0x3001,0x3002,0xFF0C,0xFF0E,0x30FB,0xFF1A,0xFF1B,/* 0x40-0x47 */
26 0xFF1F,0xFF01,0x309B,0x309C,0x00B4,0xFF40,0x00A8,0xFF3E,/* 0x48-0x4F */
[all …]
|
| D | nls_cp936.c | 17 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x00-0x07 */
18 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x08-0x0F */
19 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x10-0x17 */
20 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x18-0x1F */
21 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x20-0x27 */
22 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x28-0x2F */
23 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x30-0x37 */
24 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x38-0x3F */
25 0x4E02,0x4E04,0x4E05,0x4E06,0x4E0F,0x4E12,0x4E17,0x4E1F,/* 0x40-0x47 */
26 0x4E20,0x4E21,0x4E23,0x4E26,0x4E29,0x4E2E,0x4E2F,0x4E31,/* 0x48-0x4F */
[all …]
|
| D | nls_cp949.c | 17 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x00-0x07 */
18 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x08-0x0F */
19 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x10-0x17 */
20 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x18-0x1F */
21 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x20-0x27 */
22 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x28-0x2F */
23 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x30-0x37 */
24 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x38-0x3F */
25 0x0000,0xAC02,0xAC03,0xAC05,0xAC06,0xAC0B,0xAC0C,0xAC0D,/* 0x40-0x47 */
26 0xAC0E,0xAC0F,0xAC18,0xAC1E,0xAC1F,0xAC21,0xAC22,0xAC23,/* 0x48-0x4F */
[all …]
|
| /Linux-v5.15/lib/crypto/ |
| D | blake2s-selftest.c | 27 * for (i = 0; i < len; i++) {
28 * if (i && (i % 12) == 0)
30 * printf("0x%02x, ", vec[i]);
42 * key[0] = key[1] = 1;
46 * for (i = 0; i < BLAKE2S_TESTVEC_COUNT; ++i)
51 * for (i = 0; i < BLAKE2S_TESTVEC_COUNT; ++i) {
71 * return 0;
75 { 0xa1, },
76 { 0x7c, 0x89, },
77 { 0x74, 0x0e, 0xd4, },
[all …]
|
| D | chacha20poly1305-selftest.c | 31 0x49, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x65, 0x74,
32 0x2d, 0x44, 0x72, 0x61, 0x66, 0x74, 0x73, 0x20,
33 0x61, 0x72, 0x65, 0x20, 0x64, 0x72, 0x61, 0x66,
34 0x74, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65,
35 0x6e, 0x74, 0x73, 0x20, 0x76, 0x61, 0x6c, 0x69,
36 0x64, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x61, 0x20,
37 0x6d, 0x61, 0x78, 0x69, 0x6d, 0x75, 0x6d, 0x20,
38 0x6f, 0x66, 0x20, 0x73, 0x69, 0x78, 0x20, 0x6d,
39 0x6f, 0x6e, 0x74, 0x68, 0x73, 0x20, 0x61, 0x6e,
40 0x64, 0x20, 0x6d, 0x61, 0x79, 0x20, 0x62, 0x65,
[all …]
|
| /Linux-v5.15/drivers/media/usb/gspca/ |
| D | ov534_9.c | 20 #define OV534_REG_ADDRESS 0xf1 /* sensor address */
21 #define OV534_REG_SUBADDR 0xf2
22 #define OV534_REG_WRITE 0xf3
23 #define OV534_REG_READ 0xf4
24 #define OV534_REG_OPERATION 0xf5
25 #define OV534_REG_STATUS 0xf6
27 #define OV534_OP_WRITE_3 0x37
28 #define OV534_OP_WRITE_2 0x33
29 #define OV534_OP_READ_2 0xf9
54 #define QVGA_MODE 0
[all …]
|
| /Linux-v5.15/drivers/pinctrl/tegra/ |
| D | pinctrl-tegra20.c | 29 #define TEGRA_PIN_VI_GP6_PA0 _GPIO(0)
1965 #define TRISTATE_REG_A 0x14
1966 #define PIN_MUX_CTL_REG_A 0x80
1967 #define PULLUPDOWN_REG_A 0xa0
1968 #define PINGROUP_REG_A 0x868
1990 .tri_bank = 0, \
1998 .parked_bitmask = 0, \
2012 .parked_bitmask = 0, \
2028 .parked_bitmask = 0, \
2049 MUX_PG(ata, IDE, NAND, GMI, RSVD4, 0x14, 0, 0x80, 24, 0xa0, 0),
[all …]
|
| /Linux-v5.15/lib/ |
| D | crc32test.c | 15 * There are various incantations of crc32(). Some use a seed of 0 or ~0.
16 * Some xor at the end with ~0. The generic crc32() function takes
19 * drivers/net/smc9194.c uses seed ~0, doesn't xor with ~0.
20 * fs/jffs2 uses seed 0, doesn't xor with ~0.
21 * fs/partitions/efi.c uses seed ~0, xor's with ~0.
36 0x5b, 0x85, 0x21, 0xcb, 0x09, 0x68, 0x7d, 0x30,
37 0xc7, 0x69, 0xd7, 0x30, 0x92, 0xde, 0x59, 0xe4,
38 0xc9, 0x6e, 0x8b, 0xdb, 0x98, 0x6b, 0xaa, 0x60,
39 0xa8, 0xb5, 0xbc, 0x6c, 0xa9, 0xb1, 0x5b, 0x2c,
40 0xea, 0xb4, 0x92, 0x6a, 0x3f, 0x79, 0x91, 0xe4,
[all …]
|
| D | crc7.c | 18 0x00, 0x12, 0x24, 0x36, 0x48, 0x5a, 0x6c, 0x7e,
19 0x90, 0x82, 0xb4, 0xa6, 0xd8, 0xca, 0xfc, 0xee,
20 0x32, 0x20, 0x16, 0x04, 0x7a, 0x68, 0x5e, 0x4c,
21 0xa2, 0xb0, 0x86, 0x94, 0xea, 0xf8, 0xce, 0xdc,
22 0x64, 0x76, 0x40, 0x52, 0x2c, 0x3e, 0x08, 0x1a,
23 0xf4, 0xe6, 0xd0, 0xc2, 0xbc, 0xae, 0x98, 0x8a,
24 0x56, 0x44, 0x72, 0x60, 0x1e, 0x0c, 0x3a, 0x28,
25 0xc6, 0xd4, 0xe2, 0xf0, 0x8e, 0x9c, 0xaa, 0xb8,
26 0xc8, 0xda, 0xec, 0xfe, 0x80, 0x92, 0xa4, 0xb6,
27 0x58, 0x4a, 0x7c, 0x6e, 0x10, 0x02, 0x34, 0x26,
[all …]
|
| /Linux-v5.15/drivers/mtd/maps/ |
| D | ck804xrom.c | 68 * byte @0x88: bit 0..7
69 * byte @0x8c: bit 8..15
70 * word @0x90: bit 16..30
72 * Please set win_size_bits to 0x7fffffff if you actually want to do something
74 static uint win_size_bits = 0;
75 module_param(win_size_bits, uint, 0);
89 pci_read_config_byte(window->pdev, 0x6d, &byte); in ck804xrom_cleanup()
90 pci_write_config_byte(window->pdev, 0x6d, byte & ~1); in ck804xrom_cleanup()
109 window->phys = 0; in ck804xrom_cleanup()
110 window->size = 0; in ck804xrom_cleanup()
[all …]
|
| /Linux-v5.15/drivers/gpu/drm/panel/ |
| D | panel-boe-himax8279d.c | 63 gpiod_set_value(pinfo->enable_gpio, 0); in disable_gpios()
64 gpiod_set_value(pinfo->pp33_gpio, 0); in disable_gpios()
65 gpiod_set_value(pinfo->pp18_gpio, 0); in disable_gpios()
71 unsigned int i = 0; in send_mipi_cmds()
74 for (i = 0; i < pinfo->desc->on_cmds_num; i++) { in send_mipi_cmds()
78 if (err < 0) in send_mipi_cmds()
82 return 0; in send_mipi_cmds()
91 return 0; in boe_panel_disable()
94 if (err < 0) { in boe_panel_disable()
101 return 0; in boe_panel_disable()
[all …]
|
| D | panel-samsung-s6e3ha2.c | 22 #define S6E3HA2_MIN_BRIGHTNESS 0
31 { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x82, 0x83,
32 0x85, 0x88, 0x8b, 0x8b, 0x84, 0x88, 0x82, 0x82, 0x89, 0x86, 0x8c,
33 0x94, 0x84, 0xb1, 0xaf, 0x8e, 0xcf, 0xad, 0xc9, 0x00, 0x00, 0x00,
34 0x00, 0x00 },
35 { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x84, 0x84,
36 0x85, 0x87, 0x8b, 0x8a, 0x84, 0x88, 0x82, 0x82, 0x89, 0x86, 0x8a,
37 0x93, 0x84, 0xb0, 0xae, 0x8e, 0xc9, 0xa8, 0xc5, 0x00, 0x00, 0x00,
38 0x00, 0x00 },
39 { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
[all …]
|
| /Linux-v5.15/arch/arm64/boot/dts/sprd/ |
| D | whale2.dtsi | 24 reg = <0 0x20210000 0 0x10000>;
29 reg = <0 0x402b0000 0 0x10000>;
34 reg = <0 0x402e0000 0 0x10000>;
39 reg = <0 0x40400000 0 0x10000>;
44 reg = <0 0x415e0000 0 0x1000000>;
49 reg = <0 0x61100000 0 0x10000>;
54 reg = <0 0x62100000 0 0x10000>;
59 reg = <0 0x63100000 0 0x10000>;
64 reg = <0 0x70b00000 0 0x40000>;
71 ranges = <0 0x0 0x70000000 0x10000000>;
[all …]
|
| /Linux-v5.15/drivers/media/platform/s5p-mfc/ |
| D | regs-mfc.h | 20 #define S5P_FIMV_START_ADDR 0x0000
21 #define S5P_FIMV_END_ADDR 0xe008
23 #define S5P_FIMV_SW_RESET 0x0000
24 #define S5P_FIMV_RISC_HOST_INT 0x0008
27 #define S5P_FIMV_HOST2RISC_CMD 0x0030
28 #define S5P_FIMV_HOST2RISC_ARG1 0x0034
29 #define S5P_FIMV_HOST2RISC_ARG2 0x0038
30 #define S5P_FIMV_HOST2RISC_ARG3 0x003c
31 #define S5P_FIMV_HOST2RISC_ARG4 0x0040
34 #define S5P_FIMV_RISC2HOST_CMD 0x0044
[all …]
|
| /Linux-v5.15/drivers/media/usb/stk1160/ |
| D | stk1160-ac97.c | 31 return 0; in stk1160_ac97_wait_transfer_complete()
46 stk1160_write_reg(dev, STK1160_AC97_CMD, value & 0xff); in stk1160_write_ac97()
47 stk1160_write_reg(dev, STK1160_AC97_CMD + 1, (value & 0xff00) >> 8); in stk1160_write_ac97()
50 stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x8c); in stk1160_write_ac97()
59 u8 vall = 0; in stk1160_read_ac97()
60 u8 valh = 0; in stk1160_read_ac97()
66 stk1160_write_reg(dev, STK1160_AC97CTL_0, 0x8b); in stk1160_read_ac97()
69 if (stk1160_ac97_wait_transfer_complete(dev) < 0) in stk1160_read_ac97()
70 return 0; in stk1160_read_ac97()
84 value = stk1160_read_ac97(dev, 0x12); /* CD volume */ in stk1160_ac97_dump_regs()
[all …]
|
| /Linux-v5.15/drivers/media/i2c/ |
| D | adv7393_regs.h | 31 #define ADV7393_POWER_MODE_REG (0x00)
32 #define ADV7393_MODE_SELECT_REG (0x01)
33 #define ADV7393_MODE_REG0 (0x02)
35 #define ADV7393_DAC123_OUTPUT_LEVEL (0x0B)
37 #define ADV7393_SOFT_RESET (0x17)
39 #define ADV7393_HD_MODE_REG1 (0x30)
40 #define ADV7393_HD_MODE_REG2 (0x31)
41 #define ADV7393_HD_MODE_REG3 (0x32)
42 #define ADV7393_HD_MODE_REG4 (0x33)
43 #define ADV7393_HD_MODE_REG5 (0x34)
[all …]
|
| /Linux-v5.15/sound/ppc/ |
| D | tumbler_volume.h | 4 /* 0 = -70 dB, 175 = 18.0 dB in 0.5 dB step */
6 0x00000015, 0x00000016, 0x00000017,
7 0x00000019, 0x0000001a, 0x0000001c,
8 0x0000001d, 0x0000001f, 0x00000021,
9 0x00000023, 0x00000025, 0x00000027,
10 0x00000029, 0x0000002c, 0x0000002e,
11 0x00000031, 0x00000034, 0x00000037,
12 0x0000003a, 0x0000003e, 0x00000042,
13 0x00000045, 0x0000004a, 0x0000004e,
14 0x00000053, 0x00000057, 0x0000005d,
[all …]
|
| /Linux-v5.15/drivers/media/usb/tm6000/ |
| D | tm6000-stds.c | 28 { TM6010_REQ07_R3F_RESET, 0x01 },
29 { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x04 },
30 { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
31 { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
32 { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
33 { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
34 { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
35 { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 },
36 { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a },
37 { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 },
[all …]
|
| /Linux-v5.15/drivers/net/wireless/broadcom/b43/ |
| D | radio_2056.h | 9 #define B2056_SYN (0x0 << 12)
10 #define B2056_TX0 (0x2 << 12)
11 #define B2056_TX1 (0x3 << 12)
12 #define B2056_RX0 (0x6 << 12)
13 #define B2056_RX1 (0x7 << 12)
14 #define B2056_ALLTX (0xE << 12)
15 #define B2056_ALLRX (0xF << 12)
17 #define B2056_SYN_RESERVED_ADDR0 0x00
18 #define B2056_SYN_IDCODE 0x01
19 #define B2056_SYN_RESERVED_ADDR2 0x02
[all …]
|
