| /Linux-v5.15/drivers/power/supply/ |
| D | rt9455_charger.c | 305 dev_err(dev, "Failed to set RST bit\n"); in rt9455_register_reset()
316 dev_err(dev, "Failed to read RST bit\n"); in rt9455_register_reset()
361 dev_err(&info->client->dev, "Failed to read PWR_RDY bit\n"); in rt9455_charger_get_status()
376 dev_err(&info->client->dev, "Failed to read STAT bits\n"); in rt9455_charger_get_status()
415 dev_err(dev, "Failed to read IRQ1 register\n"); in rt9455_charger_get_health()
434 dev_err(dev, "Failed to read IRQ2 register\n"); in rt9455_charger_get_health()
449 dev_err(dev, "Failed to read IRQ3 register\n"); in rt9455_charger_get_health()
472 dev_err(dev, "Failed to read STAT bits\n"); in rt9455_charger_get_health()
492 dev_err(&info->client->dev, "Failed to read BATAB bit\n"); in rt9455_charger_get_battery_presence()
513 dev_err(&info->client->dev, "Failed to read PWR_RDY bit\n"); in rt9455_charger_get_online()
[all …]
|
| D | tps65090-charger.c | 54 dev_err(charger->dev, "%s(): error reading in register 0x%x\n", in tps65090_low_chrg_current()
72 dev_err(charger->dev, "%s(): error reading in register 0x%x\n", in tps65090_enable_charging()
80 dev_err(charger->dev, "%s(): error writing in register 0x%x\n", in tps65090_enable_charging()
98 dev_err(charger->dev, in tps65090_config_charger()
108 dev_err(charger->dev, "%s(): error reading in register 0x%x\n", in tps65090_config_charger()
116 dev_err(charger->dev, "%s(): error writing in register 0x%x\n", in tps65090_config_charger()
148 dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n", in tps65090_charger_isr()
156 dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n", in tps65090_charger_isr()
175 dev_err(charger->dev, in tps65090_charger_isr()
196 dev_err(&pdev->dev, "Memory alloc for tps65090_pdata failed\n"); in tps65090_parse_dt_charger_data()
[all …]
|
| /Linux-v5.15/drivers/mfd/ |
| D | arizona-core.c | 112 dev_err(arizona->dev, "CLKGEN error\n"); in arizona_clkgen_err()
126 dev_err(arizona->dev, "Failed to read underclock status: %d\n", in arizona_underclocked()
132 dev_err(arizona->dev, "AIF3 underclocked\n"); in arizona_underclocked()
134 dev_err(arizona->dev, "AIF2 underclocked\n"); in arizona_underclocked()
136 dev_err(arizona->dev, "AIF1 underclocked\n"); in arizona_underclocked()
138 dev_err(arizona->dev, "ISRC3 underclocked\n"); in arizona_underclocked()
140 dev_err(arizona->dev, "ISRC2 underclocked\n"); in arizona_underclocked()
142 dev_err(arizona->dev, "ISRC1 underclocked\n"); in arizona_underclocked()
144 dev_err(arizona->dev, "FX underclocked\n"); in arizona_underclocked()
146 dev_err(arizona->dev, "ASRC underclocked\n"); in arizona_underclocked()
[all …]
|
| /Linux-v5.15/drivers/pci/controller/ |
| D | pcie-rockchip.c | 73 dev_err(dev, "missing core reset property in node\n"); in rockchip_pcie_parse_dt()
80 dev_err(dev, "missing mgmt reset property in node\n"); in rockchip_pcie_parse_dt()
88 dev_err(dev, "missing mgmt-sticky reset property in node\n"); in rockchip_pcie_parse_dt()
95 dev_err(dev, "missing pipe reset property in node\n"); in rockchip_pcie_parse_dt()
102 dev_err(dev, "missing pm reset property in node\n"); in rockchip_pcie_parse_dt()
109 dev_err(dev, "missing pclk reset property in node\n"); in rockchip_pcie_parse_dt()
116 dev_err(dev, "missing aclk reset property in node\n"); in rockchip_pcie_parse_dt()
130 dev_err(dev, "aclk clock not found\n"); in rockchip_pcie_parse_dt()
136 dev_err(dev, "aclk_perf clock not found\n"); in rockchip_pcie_parse_dt()
142 dev_err(dev, "hclk clock not found\n"); in rockchip_pcie_parse_dt()
[all …]
|
| /Linux-v5.15/drivers/edac/ |
| D | xgene_edac.c | 359 dev_err(edac->dev, "no MCU resource address\n"); in xgene_edac_mc_add()
364 dev_err(edac->dev, "unable to map MCU resource\n"); in xgene_edac_mc_add()
371 dev_err(edac->dev, "no memory-controller property\n"); in xgene_edac_mc_add()
414 dev_err(edac->dev, "edac_mc_add_mc failed\n"); in xgene_edac_mc_add()
531 dev_err(edac_dev->dev, in xgene_edac_pmd_l1_check()
538 dev_err(edac_dev->dev, "One or more correctable error\n"); in xgene_edac_pmd_l1_check()
540 dev_err(edac_dev->dev, "Multiple correctable error\n"); in xgene_edac_pmd_l1_check()
543 dev_err(edac_dev->dev, "L1 TLB multiple hit\n"); in xgene_edac_pmd_l1_check()
546 dev_err(edac_dev->dev, "Way select multiple hit\n"); in xgene_edac_pmd_l1_check()
549 dev_err(edac_dev->dev, "Physical tag parity error\n"); in xgene_edac_pmd_l1_check()
[all …]
|
| /Linux-v5.15/drivers/iio/chemical/ |
| D | bme680_core.c | 120 dev_err(dev, "failed to read BME680_T1_LSB_REG\n"); in bme680_read_calib()
128 dev_err(dev, "failed to read BME680_T2_LSB_REG\n"); in bme680_read_calib()
135 dev_err(dev, "failed to read BME680_T3_REG\n"); in bme680_read_calib()
144 dev_err(dev, "failed to read BME680_P1_LSB_REG\n"); in bme680_read_calib()
152 dev_err(dev, "failed to read BME680_P2_LSB_REG\n"); in bme680_read_calib()
159 dev_err(dev, "failed to read BME680_P3_REG\n"); in bme680_read_calib()
167 dev_err(dev, "failed to read BME680_P4_LSB_REG\n"); in bme680_read_calib()
175 dev_err(dev, "failed to read BME680_P5_LSB_REG\n"); in bme680_read_calib()
182 dev_err(dev, "failed to read BME680_P6_REG\n"); in bme680_read_calib()
189 dev_err(dev, "failed to read BME680_P7_REG\n"); in bme680_read_calib()
[all …]
|
| /Linux-v5.15/drivers/input/touchscreen/ |
| D | bu21013_ts.c | 245 dev_err(&ts->client->dev, "%s failed\n", __func__); in bu21013_gpio_irq()
269 dev_err(&client->dev, "BU21013_RESET reg write failed\n"); in bu21013_init_chip()
277 dev_err(&client->dev, "BU21013_SENSOR_0_7 reg write failed\n"); in bu21013_init_chip()
284 dev_err(&client->dev, "BU21013_SENSOR_8_15 reg write failed\n"); in bu21013_init_chip()
291 dev_err(&client->dev, "BU21013_SENSOR_16_23 reg write failed\n"); in bu21013_init_chip()
299 dev_err(&client->dev, "BU21013_POS_MODE1 reg write failed\n"); in bu21013_init_chip()
310 dev_err(&client->dev, "BU21013_POS_MODE2 reg write failed\n"); in bu21013_init_chip()
318 dev_err(&client->dev, "BU21013_CLK_MODE reg write failed\n"); in bu21013_init_chip()
326 dev_err(&client->dev, "BU21013_IDLE reg write failed\n"); in bu21013_init_chip()
333 dev_err(&client->dev, "BU21013_INT_MODE reg write failed\n"); in bu21013_init_chip()
[all …]
|
| /Linux-v5.15/drivers/media/platform/sti/delta/ |
| D | delta-ipc.c | 122 dev_err(delta->dev, in delta_ipc_open()
130 dev_err(delta->dev, in delta_ipc_open()
137 dev_err(delta->dev, in delta_ipc_open()
144 dev_err(delta->dev, in delta_ipc_open()
151 dev_err(delta->dev, in delta_ipc_open()
187 dev_err(delta->dev, in delta_ipc_open()
197 dev_err(delta->dev, in delta_ipc_open()
207 dev_err(delta->dev, in delta_ipc_open()
238 dev_err(delta->dev, in delta_ipc_set_stream()
245 dev_err(delta->dev, in delta_ipc_set_stream()
[all …]
|
| /Linux-v5.15/drivers/input/mouse/ |
| D | elan_i2c_i2c.c | 106 dev_err(&client->dev, "reading cmd (0x%04x) fail.\n", reg); in elan_i2c_read_cmd()
131 dev_err(&client->dev, "writing cmd (0x%04x) failed: %d\n", in elan_i2c_write_cmd()
147 dev_err(dev, "device reset failed: %d\n", error); in elan_i2c_initialize()
157 dev_err(dev, "failed to read reset response: %d\n", error); in elan_i2c_initialize()
164 dev_err(dev, "cannot get device descriptor: %d\n", error); in elan_i2c_initialize()
171 dev_err(dev, "fetching report descriptor failed.: %d\n", error); in elan_i2c_initialize()
192 dev_err(&client->dev, in elan_i2c_power_control()
206 dev_err(&client->dev, in elan_i2c_power_control()
256 dev_err(&client->dev, "failed to get pattern: %d\n", error); in elan_i2c_get_pattern()
286 dev_err(&client->dev, "failed to get %s version: %d\n", in elan_i2c_get_version()
[all …]
|
| D | elan_i2c_smbus.c | 64 dev_err(&client->dev, "hello packet length fail: %d\n", len); in elan_smbus_initialize()
71 dev_err(&client->dev, "hello packet fail [%*ph]\n", in elan_smbus_initialize()
79 dev_err(&client->dev, "failed to enable touchpad: %d\n", error); in elan_smbus_initialize()
161 dev_err(&client->dev, "failed to get %s version: %d\n", in elan_smbus_get_version()
179 dev_err(&client->dev, "failed to get SM version: %d\n", error); in elan_smbus_get_sm_version()
197 dev_err(&client->dev, "failed to get product ID: %d\n", error); in elan_smbus_get_product_id()
216 dev_err(&client->dev, "failed to get %s checksum: %d\n", in elan_smbus_get_checksum()
235 dev_err(&client->dev, "failed to get dimensions: %d\n", error); in elan_smbus_get_max()
255 dev_err(&client->dev, "failed to get resolution: %d\n", error); in elan_smbus_get_resolution()
276 dev_err(&client->dev, "failed to get trace info: %d\n", error); in elan_smbus_get_num_traces()
[all …]
|
| /Linux-v5.15/drivers/input/misc/ |
| D | drv2667.c | 140 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
147 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
157 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
165 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
173 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
191 dev_err(&haptics->client->dev, in drv2667_worker()
199 dev_err(&haptics->client->dev, in drv2667_worker()
207 dev_err(&haptics->client->dev, in drv2667_worker()
215 dev_err(&haptics->client->dev, in drv2667_worker()
222 dev_err(&haptics->client->dev, in drv2667_worker()
[all …]
|
| D | drv260x.c | 260 dev_err(&haptics->client->dev, in drv260x_worker()
266 dev_err(&haptics->client->dev, in drv260x_worker()
299 dev_err(&haptics->client->dev, in drv260x_close()
352 dev_err(&haptics->client->dev, in drv260x_init()
361 dev_err(&haptics->client->dev, in drv260x_init()
373 dev_err(&haptics->client->dev, in drv260x_init()
386 dev_err(&haptics->client->dev, in drv260x_init()
396 dev_err(&haptics->client->dev, in drv260x_init()
409 dev_err(&haptics->client->dev, in drv260x_init()
419 dev_err(&haptics->client->dev, in drv260x_init()
[all …]
|
| /Linux-v5.15/drivers/iio/light/ |
| D | gp2ap002.c | 166 dev_err(gp2ap002->dev, "error reading proximity\n"); in gp2ap002_prox_irq()
176 dev_err(gp2ap002->dev, in gp2ap002_prox_irq()
186 dev_err(gp2ap002->dev, in gp2ap002_prox_irq()
206 dev_err(gp2ap002->dev, "error setting up VOUT control\n"); in gp2ap002_prox_irq()
288 dev_err(gp2ap002->dev, "error setting up LED gain\n"); in gp2ap002_init()
293 dev_err(gp2ap002->dev, in gp2ap002_init()
302 dev_err(gp2ap002->dev, in gp2ap002_init()
312 dev_err(gp2ap002->dev, "error setting up operation mode\n"); in gp2ap002_init()
320 dev_err(gp2ap002->dev, "error setting up VOUT control\n"); in gp2ap002_init()
461 dev_err(dev, "cannot check compatible\n"); in gp2ap002_probe()
[all …]
|
| /Linux-v5.15/drivers/net/ethernet/stmicro/stmmac/ |
| D | dwmac-rk.c | 93 dev_err(dev, "%s: Missing rockchip,grf property\n", __func__); in px30_set_to_rmii()
107 dev_err(dev, "%s: Missing clk_mac_speed clock\n", __func__); in px30_set_rmii_speed()
117 dev_err(dev, "%s: set clk_mac_speed rate 2500000 failed: %d\n", in px30_set_rmii_speed()
125 dev_err(dev, "%s: set clk_mac_speed rate 25000000 failed: %d\n", in px30_set_rmii_speed()
129 dev_err(dev, "unknown speed value for RMII! speed=%d", speed); in px30_set_rmii_speed()
172 dev_err(dev, "Missing rockchip,grf property\n"); in rk3128_set_to_rgmii()
190 dev_err(dev, "Missing rockchip,grf property\n"); in rk3128_set_to_rmii()
203 dev_err(dev, "Missing rockchip,grf property\n"); in rk3128_set_rgmii_speed()
217 dev_err(dev, "unknown speed value for RGMII! speed=%d", speed); in rk3128_set_rgmii_speed()
225 dev_err(dev, "Missing rockchip,grf property\n"); in rk3128_set_rmii_speed()
[all …]
|
| /Linux-v5.15/drivers/cpufreq/ |
| D | sti-cpufreq.c | 65 dev_err(dev, "No major number offset provided in %pOF [%d]\n", in sti_cpufreq_fetch_major()
72 dev_err(dev, "Failed to read major number from syscon [%d]\n", in sti_cpufreq_fetch_major()
91 dev_err(dev, in sti_cpufreq_fetch_minor()
99 dev_err(dev, in sti_cpufreq_fetch_minor()
122 dev_err(dev, "Failed to allocate reg field\n"); in sti_cpufreq_fetch_regmap_field()
128 dev_err(dev, "Failed to read %s code\n", in sti_cpufreq_fetch_regmap_field()
165 dev_err(dev, "This SoC doesn't support voltage scaling\n"); in sti_cpufreq_set_opp_info()
199 dev_err(dev, "Failed to obtain major version\n"); in sti_cpufreq_set_opp_info()
206 dev_err(dev, "Failed to obtain minor version\n"); in sti_cpufreq_set_opp_info()
215 dev_err(dev, "Failed to set prop name\n"); in sti_cpufreq_set_opp_info()
[all …]
|
| /Linux-v5.15/drivers/gpu/drm/panel/ |
| D | panel-jdi-lt070me05000.c | 71 dev_err(dev, "failed to set pixel format: %d\n", ret); in jdi_panel_init()
77 dev_err(dev, "failed to set column address: %d\n", ret); in jdi_panel_init()
83 dev_err(dev, "failed to set page address: %d\n", ret); in jdi_panel_init()
96 dev_err(dev, "failed to write control display: %d\n", ret); in jdi_panel_init()
104 dev_err(dev, "failed to set cabc off: %d\n", ret); in jdi_panel_init()
110 dev_err(dev, "failed to set exit sleep mode: %d\n", ret); in jdi_panel_init()
118 dev_err(dev, "failed to set mcap: %d\n", ret); in jdi_panel_init()
128 dev_err(dev, "failed to set display interface setting: %d\n" in jdi_panel_init()
137 dev_err(dev, "failed to set default values for mcap: %d\n" in jdi_panel_init()
155 dev_err(dev, "failed to set display on: %d\n", ret); in jdi_panel_on()
[all …]
|
| D | panel-sony-acx424akp.c | 110 dev_err(acx->dev, "failed to disable display backlight (%d)\n", ret); in acx424akp_set_brightness()
127 dev_err(acx->dev, "failed to set display PWM ratio (%d)\n", ret); in acx424akp_set_brightness()
143 dev_err(acx->dev, "failed to unlock CMD 2 (%d)\n", ret); in acx424akp_set_brightness()
149 dev_err(acx->dev, "failed to enter page 1 (%d)\n", ret); in acx424akp_set_brightness()
155 dev_err(acx->dev, "failed to disable MTP reload (%d)\n", ret); in acx424akp_set_brightness()
160 dev_err(acx->dev, "failed to set PWM divisor (%d)\n", ret); in acx424akp_set_brightness()
166 dev_err(acx->dev, "failed to lock CMD 2 (%d)\n", ret); in acx424akp_set_brightness()
175 dev_err(acx->dev, "failed to enable display backlight (%d)\n", ret); in acx424akp_set_brightness()
201 dev_err(acx->dev, "could not vendor ID byte\n"); in acx424akp_read_id()
206 dev_err(acx->dev, "could not read device version byte\n"); in acx424akp_read_id()
[all …]
|
| /Linux-v5.15/sound/soc/codecs/ |
| D | pcm512x.c | 427 dev_err(component->dev, in pcm512x_digital_playback_switch_put()
591 dev_err(dev, "Need SCLK for master mode: %ld\n", in pcm512x_dai_startup_master()
683 dev_err(component->dev, "Failed to remove standby: %d\n", in pcm512x_set_bias_level()
693 dev_err(component->dev, "Failed to request standby: %d\n", in pcm512x_set_bias_level()
727 dev_err(dev, "Impossible to generate a suitable SCK\n"); in pcm512x_find_sck()
830 dev_err(dev, "Need a slower clock as pll-input\n"); in pcm512x_find_pll_coeff()
834 dev_err(dev, "Need a faster clock as pll-input\n"); in pcm512x_find_pll_coeff()
919 dev_err(dev, "No LRCLK?\n"); in pcm512x_set_dividers()
933 dev_err(dev, "Failed to find suitable BCLK: %d\n", ret); in pcm512x_set_dividers()
937 dev_err(dev, "No BCLK?\n"); in pcm512x_set_dividers()
[all …]
|
| /Linux-v5.15/drivers/thermal/qcom/ |
| D | lmh.c | 111 dev_err(dev, "missing qcom,lmh-temp-high-millicelsius property\n"); in lmh_probe()
117 dev_err(dev, "missing qcom,lmh-temp-low-millicelsius property\n"); in lmh_probe()
123 dev_err(dev, "missing qcom,lmh-temp-arm-millicelsius property\n"); in lmh_probe()
137 dev_err(dev, "Wrong CPU id associated with LMh node\n"); in lmh_probe()
147 dev_err(dev, "Error %d enabling current subfunction\n", ret); in lmh_probe()
152 dev_err(dev, "Error %d enabling reliability subfunction\n", ret); in lmh_probe()
157 dev_err(dev, "Error %d enabling BCL subfunction\n", ret); in lmh_probe()
162 dev_err(dev, "Error %d enabling thermal subfunction\n", ret); in lmh_probe()
168 dev_err(dev, "Error %d changing profile\n", ret); in lmh_probe()
176 dev_err(dev, "Error setting thermal ARM threshold%d\n", ret); in lmh_probe()
[all …]
|
| /Linux-v5.15/drivers/gpu/drm/mcde/ |
| D | mcde_drv.c | 148 dev_err(drm->dev, in mcde_modeset_init()
156 dev_err(drm->dev, in mcde_modeset_init()
177 dev_err(drm->dev, "failed to init vblank\n"); in mcde_modeset_init()
183 dev_err(drm->dev, "failed to init display\n"); in mcde_modeset_init()
191 dev_err(drm->dev, "failed to attach display output bridge\n"); in mcde_modeset_init()
229 dev_err(dev, "can't bind component devices\n"); in mcde_drm_bind()
296 dev_err(dev, "can't get EPOD regulator\n"); in mcde_probe()
301 dev_err(dev, "can't enable EPOD regulator\n"); in mcde_probe()
307 dev_err(dev, "can't get VANA regulator\n"); in mcde_probe()
312 dev_err(dev, "can't enable VANA regulator\n"); in mcde_probe()
[all …]
|
| /Linux-v5.15/drivers/crypto/qat/qat_common/ |
| D | adf_init.c | 67 dev_err(&GET_DEV(accel_dev), in adf_dev_init()
73 dev_err(&GET_DEV(accel_dev), "Device not configured\n"); in adf_dev_init()
78 dev_err(&GET_DEV(accel_dev), "Failed initialize etr\n"); in adf_dev_init()
83 dev_err(&GET_DEV(accel_dev), "Failed initialize admin comms\n"); in adf_dev_init()
88 dev_err(&GET_DEV(accel_dev), "Failed initialize hw arbiter\n"); in adf_dev_init()
93 dev_err(&GET_DEV(accel_dev), in adf_dev_init()
100 dev_err(&GET_DEV(accel_dev), in adf_dev_init()
107 dev_err(&GET_DEV(accel_dev), "Failed to allocate interrupts\n"); in adf_dev_init()
127 dev_err(&GET_DEV(accel_dev), in adf_dev_init()
158 dev_err(&GET_DEV(accel_dev), "AE Start Failed\n"); in adf_dev_start()
[all …]
|
| /Linux-v5.15/drivers/net/wireless/microchip/wilc1000/ |
| D | spi.c | 240 dev_err(&spi->dev, "SPI transaction failed\n"); in wilc_spi_tx()
244 dev_err(&spi->dev, in wilc_spi_tx()
284 dev_err(&spi->dev, "SPI transaction failed\n"); in wilc_spi_rx()
287 dev_err(&spi->dev, in wilc_spi_rx()
323 dev_err(&spi->dev, "SPI transaction failed\n"); in wilc_spi_tx_rx()
325 dev_err(&spi->dev, in wilc_spi_tx_rx()
366 dev_err(&spi->dev, in spi_data_write()
376 dev_err(&spi->dev, in spi_data_write()
390 dev_err(&spi->dev, "Failed data block crc write, bus error...\n"); in spi_data_write()
443 dev_err(&spi->dev, "cmd [%x] not supported\n", cmd); in wilc_spi_single_read()
[all …]
|
| /Linux-v5.15/sound/soc/sof/intel/ |
| D | hda-loader.c | 41 dev_err(sdev->dev, "error: no stream available\n"); in cl_stream_prepare()
50 dev_err(sdev->dev, "error: memory alloc failed: %d\n", ret); in cl_stream_prepare()
61 dev_err(sdev->dev, "error: iccmax stream prepare failed: %d\n", ret); in cl_stream_prepare()
67 dev_err(sdev->dev, "error: hdac prepare failed: %d\n", ret); in cl_stream_prepare()
99 dev_err(sdev->dev, "error: dsp core 0/1 power up failed\n"); in cl_dsp_init()
122 dev_err(sdev->dev, in cl_dsp_init()
138 dev_err(sdev->dev, in cl_dsp_init()
155 dev_err(sdev->dev, in cl_dsp_init()
175 dev_err(sdev->dev, in cl_dsp_init()
258 dev_err(sdev->dev, "error: DMA trigger start failed\n"); in cl_copy_fw()
[all …]
|
| /Linux-v5.15/drivers/remoteproc/ |
| D | remoteproc_elf_loader.c | 53 dev_err(dev, "failed to load %s\n", name);
58 dev_err(dev, "Image is too small\n");
65 dev_err(dev, "Image is corrupted (bad magic)\n");
71 dev_err(dev, "Unsupported class: %d\n", class);
76 dev_err(dev, "elf64 header is too small\n");
86 dev_err(dev, "Unsupported firmware endianness\n");
96 dev_err(dev, "Image is too small\n");
101 dev_err(dev, "No loadable segments\n");
106 dev_err(dev, "Firmware size is too small\n");
191 dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
[all …]
|
| /Linux-v5.15/drivers/usb/host/ |
| D | xhci-pci-renesas.c | 79 dev_err(&dev->dev, "Read Status failed: %d\n", in renesas_fw_download_image()
89 dev_err(&dev->dev, "Timeout for Set DATAX step: %zd\n", step); in renesas_fw_download_image()
101 dev_err(&dev->dev, "Write to DATAX failed: %d\n", in renesas_fw_download_image()
111 dev_err(&dev->dev, "Write config for DATAX failed: %d\n", in renesas_fw_download_image()
215 dev_err(&pdev->dev, "Invalid ROM.."); in renesas_check_rom_state()
248 dev_err(&pdev->dev, in renesas_fw_check_running()
259 dev_err(&pdev->dev, in renesas_fw_check_running()
277 dev_err(&pdev->dev, in renesas_fw_check_running()
282 dev_err(&pdev->dev, in renesas_fw_check_running()
316 dev_err(&pdev->dev, in renesas_fw_download()
[all …]
|
