Searched refs:degree (Results 1 – 25 of 83) sorted by relevance
1234
/Linux-v4.19/Documentation/hwmon/ |
D | amc6821 | 65 0 degree C to 124 degree C in steps of 66 4 degree C. Read it out after writing to get 75 temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and 82 0 degree C to 124 degree C in steps 83 of 4 degree C.
|
D | nct7904 | 32 temp1_input Local temperature (1/1000 degree, 33 0.125 degree resolution) 35 temp[2-9]_input CPU temperatures (1/1000 degree, 36 0.125 degree resolution)
|
D | tmp102 | 18 sensor is accurate to 0.5 degree over the range of -25 to +85 C, and to 1.0 19 degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
|
D | sht21 | 26 0.2 degree Celsius) compared with the SHT21 (2.0% relative humidity, 27 0.3 degree Celsius). 45 humidity and 66 ms for temperature. To keep self heating below 0.1 degree
|
D | ds1621 | 48 degree Celsius to +125 in 0.5 increments. You may convert this into a 64 1.0 degree Celsius to avoid Tout "bouncing", though! 104 DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees) 105 DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees) 106 DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees) 107 DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees) 108 DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees)
|
D | xgene-hwmon | 18 - SoC on-die temperature in milli-degree C 27 temp0_input - SoC on-die temperature (milli-degree C)
|
D | tmp401 | 39 Celsius. Resolution of the remote sensor is 0.0625 degree. Local 40 sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not 42 degree).
|
D | adm1031 | 29 degree for the local temperature, 0.125 degree for the remote temperatures.
|
D | tmp108 | 22 degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
|
D | ds620 | 20 into non-volatile on-chip registers). Temperature range is -55 degree Celsius 21 to +125. Between 0 and 70 degree Celsius, accuracy is 0.5 Kelvin. The value
|
D | tc74 | 14 The tc74 has an 8-bit sensor, with 1 degree centigrade resolution
|
D | max6642 | 21 is 0.25 degree for the local temperature and for the remote temperature.
|
D | max1619 | 22 is 1.0 degree for the local temperature and for the remote temperature.
|
D | lm63 | 46 degree for the local temperature, 0.125 degree for the remote temperature.
|
D | w83773g | 25 Resolution for both the local and remote channels is 0.125 degree C.
|
D | twl4030-madc-hwmon | 44 degree Celsius. The Battery charging current channel represents
|
D | w83793 | 44 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution, 45 temp5-6 have a 1 degree Celsiis resolution.
|
/Linux-v4.19/Documentation/thermal/ |
D | exynos_thermal | 32 TI1: Trimming info for 25 degree Celsius (stored at TRIMINFO register) 33 Temperature code measured at 25 degree Celsius which is unchanged 34 TI2: Trimming info for 85 degree Celsius (stored at TRIMINFO register) 35 Temperature code measured at 85 degree Celsius which is unchanged
|
D | x86_pkg_temperature_thermal | 36 are in milli-degree Celsius. Refer to "Documentation/thermal/sysfs-api.txt" for
|
/Linux-v4.19/drivers/mtd/nand/raw/atmel/ |
D | pmecc.c | 226 unsigned int poly, degree, table_size; in atmel_pmecc_create_gf_tables() local 230 degree = PMECC_GF_DIMENSION_13; in atmel_pmecc_create_gf_tables() 234 degree = PMECC_GF_DIMENSION_14; in atmel_pmecc_create_gf_tables() 248 ret = atmel_pmecc_build_gf_tables(degree, poly, gf_tables); in atmel_pmecc_create_gf_tables() 451 int degree = get_sectorsize(user) == 512 ? 13 : 14; in atmel_pmecc_substitute() local 452 int cw_len = BIT(degree) - 1; in atmel_pmecc_substitute() 471 for (j = 0; j < degree; j++) { in atmel_pmecc_substitute() 497 int degree = get_sectorsize(user) == 512 ? 13 : 14; in atmel_pmecc_get_sigma() local 498 int cw_len = BIT(degree) - 1; in atmel_pmecc_get_sigma() 647 int degree = sector_size == 512 ? 13 : 14; in atmel_pmecc_err_location() local [all …]
|
/Linux-v4.19/Documentation/devicetree/bindings/power/supply/ |
D | max17042_battery.txt | 15 as cold (in tenths of degree Celsius). 17 as over heated (in tenths of degree Celsius).
|
/Linux-v4.19/Documentation/devicetree/bindings/spi/ |
D | spi-samsung.txt | 66 - 1: 90 degree phase shift sampling. 67 - 2: 180 degree phase shift sampling. 68 - 3: 270 degree phase shift sampling.
|
/Linux-v4.19/mm/ |
D | rmap.c | 85 anon_vma->degree = 1; /* Reference for first vma */ in anon_vma_alloc() 203 anon_vma->degree++; in __anon_vma_prepare() 290 anon_vma->degree < 2) in anon_vma_clone() 294 dst->anon_vma->degree++; in anon_vma_clone() 364 anon_vma->parent->degree++; in anon_vma_fork() 396 anon_vma->parent->degree--; in unlink_anon_vmas() 404 vma->anon_vma->degree--; in unlink_anon_vmas() 415 VM_WARN_ON(anon_vma->degree); in unlink_anon_vmas()
|
/Linux-v4.19/Documentation/devicetree/bindings/iio/temperature/ |
D | mlx90632.txt | 8 of measurement below 1 degree Celsius in object temperature range for
|
/Linux-v4.19/Documentation/devicetree/bindings/clock/ |
D | altr_socfpga.txt | 30 can be 0-315 degrees, in 45 degree increments.
|
1234