/Linux-v6.1/drivers/net/wireless/zydas/zd1211rw/ |
D | zd_mac.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* ZD1211 USB-WLAN driver for Linux 4 * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> 5 * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> 30 * of short or long preambles in 802.11b (CCK mode) or the use of 802.11a or 33 * The term zd-rate is used for the combination of the modulation type flag 43 /* The two possible modulation types. Notify that 802.11b doesn't use the CCK 50 /* The ZD1211 firmware uses proprietary encodings of the 802.11b (CCK) rates. 51 * For OFDM the PLCP rate encodings are used. We combine these "pure" rates 52 * with the modulation type flag and call the resulting values zd-rates. [all …]
|
/Linux-v6.1/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ |
D | rate.c | 43 /* rates are in units of Kbps */ 160 * In CCK mode LPPHY overloads OFDM Modulation bits with CCK Data Rate 166 {BRCM_RATE_1M, 0x00}, /* CCK 1Mbps, data rate 0 */ 167 {BRCM_RATE_2M, 0x08}, /* CCK 2Mbps, data rate 1 */ 168 {BRCM_RATE_5M5, 0x10}, /* CCK 5.5Mbps, data rate 2 */ 169 {BRCM_RATE_11M, 0x18}, /* CCK 11Mbps, data rate 3 */ 178 /* OFDM 24Mbps, code rate 1/2, 16-QAM, 1 spatial stream */ 180 /* OFDM 36Mbps, code rate 3/4, 16-QAM, 1 spatial stream */ 182 /* OFDM 48Mbps, code rate 2/3, 64-QAM, 1 spatial stream */ 184 /* OFDM 54Mbps, code rate 3/4, 64-QAM, 1 spatial stream */ [all …]
|
D | rate.h | 52 #define MCS_TXS_MASK 0xc0 /* num tx streams - 1 bit mask */ 53 #define MCS_TXS_SHIFT 6 /* num tx streams - 1 bit shift */ 55 /* returns num tx streams - 1 */ 79 * tx frame. Legacy CCK and OFDM information is held in the same manner as was 195 static inline u8 cck_rspec(u8 cck) in cck_rspec() argument 197 return cck & RSPEC_RATE_MASK; in cck_rspec() 200 /* Convert encoded rate value in plcp header to numerical rates in 500 KHz 212 /* Rates specified in brcms_c_rateset_filter() */ 222 /* copy rateset src to dst as-is (no masking or sorting) */ 231 u8 rates, uint xmask, bool mcsallow);
|
D | channel.c | 41 * maxpwr[0] - channels [34-48] 42 * maxpwr[1] - channels [52-60] 43 * maxpwr[2] - channels [62-64] 44 * maxpwr[3] - channels [100-140] 45 * maxpwr[4] - channels [149-165] 60 #define BRCM_2GHZ_2412_2462 REG_RULE(2412-10, 2462+10, 40, 0, 19, 0) 61 #define BRCM_2GHZ_2467_2472 REG_RULE(2467-10, 2472+10, 20, 0, 19, \ 64 #define BRCM_5GHZ_5180_5240 REG_RULE(5180-10, 5240+10, 40, 0, 21, \ 66 #define BRCM_5GHZ_5260_5320 REG_RULE(5260-10, 5320+10, 40, 0, 21, \ 69 #define BRCM_5GHZ_5500_5700 REG_RULE(5500-10, 5700+10, 40, 0, 21, \ [all …]
|
/Linux-v6.1/drivers/staging/r8188eu/include/ |
D | hal_com.h | 1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 2 /* Copyright(c) 2007 - 2011 Realtek Corporation. */ 10 /* CCK */ 43 /* CCK */ 76 /* ALL CCK Rate */ 87 /*------------------------------ Tx Desc definition Macro --------------------*/ 88 /* pragma mark -- Tx Desc related definition. -- */ 90 /* CCK Rates, TxHT = 0 */ 96 /* OFDM Rates, TxHT = 0 */ 106 /* MCS Rates, TxHT = 1 */
|
D | ieee80211.h | 1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 2 /* Copyright(c) 2007 - 2011 Realtek Corporation. */ 112 /* Sub-Element */ 113 WIRELESS_11B = BIT(0), /* tx:cck only, rx:cck only, hw: cck */ 114 WIRELESS_11G = BIT(1), /* tx:ofdm only, rx:ofdm & cck, hw:cck & ofdm*/ 115 WIRELESS_11_24N = BIT(3), /* tx:MCS only, rx:MCS & cck, hw:MCS & cck */ 118 /* tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm */ 120 /* tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm */ 122 /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */ 167 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section [all …]
|
D | odm_HWConfig.h | 1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 2 /* Copyright(c) 2007 - 2011 Realtek Corporation. */ 7 /* CCK Rates, TxHT = 0 */ 11 /* MCS Rates, TxHT = 1 */
|
/Linux-v6.1/drivers/net/wireless/intel/iwlwifi/fw/api/ |
D | rs.h | 1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 3 * Copyright (C) 2012-2014, 2018-2022 Intel Corporation 12 * enum iwl_tlc_mng_cfg_flags_enum - options for TLC config flags 34 * enum iwl_tlc_mng_cfg_cw - channel width options 50 * enum iwl_tlc_mng_cfg_chains - possible chains 60 * enum iwl_tlc_mng_cfg_mode - supported modes 61 * @IWL_TLC_MNG_MODE_CCK: enable CCK 82 * enum iwl_tlc_mng_ht_rates - HT/VHT/HE rates 120 * enum IWL_TLC_MCS_PER_BW - mcs index per BW 121 * @IWL_TLC_MCS_PER_BW_80: mcs for bw - 20Hhz, 40Hhz, 80Hhz [all …]
|
/Linux-v6.1/drivers/staging/rtl8723bs/include/ |
D | ieee80211.h | 1 /* SPDX-License-Identifier: GPL-2.0 */ 4 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. 141 /* Sub-Element */ 142 WIRELESS_11B = BIT(0), /* tx: cck only , rx: cck only, hw: cck */ 143 WIRELESS_11G = BIT(1), /* tx: ofdm only, rx: ofdm & cck, hw: cck & ofdm */ 144 WIRELESS_11_24N = BIT(3), /* tx: MCS only, rx: MCS & cck, hw: MCS & cck */ 149 …WIRELESS_11BG = (WIRELESS_11B|WIRELESS_11G), /* tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & o… 150 …G_24N = (WIRELESS_11G|WIRELESS_11_24N), /* tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm */ 151 …24N = (WIRELESS_11B|WIRELESS_11_24N), /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & c… 152 …SS_11B|WIRELESS_11G|WIRELESS_11_24N), /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & c… [all …]
|
/Linux-v6.1/drivers/net/wireless/intel/iwlwifi/dvm/ |
D | rxon.c | 1 // SPDX-License-Identifier: GPL-2.0-only 4 * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved. 9 #include "iwl-trans.h" 10 #include "iwl-modparams.h" 21 memset(&ctx->staging, 0, sizeof(ctx->staging)); in iwl_connection_init_rx_config() 23 if (!ctx->vif) { in iwl_connection_init_rx_config() 24 ctx->staging.dev_type = ctx->unused_devtype; in iwl_connection_init_rx_config() 26 switch (ctx->vif->type) { in iwl_connection_init_rx_config() 28 ctx->staging.dev_type = ctx->ap_devtype; in iwl_connection_init_rx_config() 32 ctx->staging.dev_type = ctx->station_devtype; in iwl_connection_init_rx_config() [all …]
|
/Linux-v6.1/drivers/net/wireless/mediatek/mt76/ |
D | eeprom.c | 1 // SPDX-License-Identifier: ISC 15 struct device_node *np = dev->dev->of_node; in mt76_get_of_eeprom() 26 return -ENOENT; in mt76_get_of_eeprom() 28 data = of_get_property(np, "mediatek,eeprom-data", &size); in mt76_get_of_eeprom() 31 return -EINVAL; in mt76_get_of_eeprom() 38 list = of_get_property(np, "mediatek,mtd-eeprom", &size); in mt76_get_of_eeprom() 40 return -ENOENT; in mt76_get_of_eeprom() 44 return -ENOENT; in mt76_get_of_eeprom() 48 return -EINVAL; in mt76_get_of_eeprom() 52 part = np->name; in mt76_get_of_eeprom() [all …]
|
/Linux-v6.1/drivers/net/wireless/mediatek/mt76/mt7603/ |
D | mac.c | 1 // SPDX-License-Identifier: ISC 42 memset(dev->mt76.aggr_stats, 0, sizeof(dev->mt76.aggr_stats)); in mt7603_mac_reset_counters() 47 u32 cck = FIELD_PREP(MT_TIMEOUT_VAL_PLCP, 231) | in mt7603_mac_set_timing() local 51 int offset = 3 * dev->coverage_class; in mt7603_mac_set_timing() 54 bool is_5ghz = dev->mphy.chandef.chan->band == NL80211_BAND_5GHZ; in mt7603_mac_set_timing() 67 mt76_wr(dev, MT_TIMEOUT_CCK, cck + reg_offset); in mt7603_mac_set_timing() 73 FIELD_PREP(MT_IFS_SLOT, dev->slottime)); in mt7603_mac_set_timing() 75 if (dev->slottime < 20 || is_5ghz) in mt7603_mac_set_timing() 218 u32 addr = mt7603_wtbl1_addr(sta->wcid.idx); in mt7603_wtbl_set_smps() 220 if (sta->smps == enabled) in mt7603_wtbl_set_smps() [all …]
|
/Linux-v6.1/drivers/net/wireless/mediatek/mt76/mt7615/ |
D | mac.c | 1 // SPDX-License-Identifier: ISC 20 #define to_rssi(field, rxv) ((FIELD_GET(field, rxv) - 220) / 2) 23 .pulse_th = { 110, -10, -80, 40, 5200, 128, 5200 }, 37 .pulse_th = { 110, -10, -80, 40, 5200, 128, 5200 }, 48 .pulse_th = { 110, -10, -80, 40, 5200, 128, 5200 }, 96 wcid = rcu_dereference(dev->mt76.wcid[idx]); in mt7615_rx_get_wcid() 100 if (!wcid->sta) in mt7615_rx_get_wcid() 104 if (!sta->vif) in mt7615_rx_get_wcid() 107 return &sta->vif->sta.wcid; in mt7615_rx_get_wcid() 112 struct mt76_phy *mphy_ext = dev->mt76.phys[MT_BAND1]; in mt7615_mac_reset_counters() [all …]
|
/Linux-v6.1/drivers/net/wireless/intel/iwlegacy/ |
D | 3945.c | 1 // SPDX-License-Identifier: GPL-2.0-only 4 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. 8 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 16 #include <linux/dma-mapping.h> 94 * il3945_disable_events - Disable selected events in uCode event log 99 * Use for only special debugging. This function is just a placeholder as-is, 107 u32 disable_ptr; /* SRAM address of event-disable bitmap array */ in il3945_disable_events() 110 0x00000000, /* 31 - 0 Event id numbers */ in il3945_disable_events() 111 0x00000000, /* 63 - 32 */ in il3945_disable_events() 112 0x00000000, /* 95 - 64 */ in il3945_disable_events() [all …]
|
D | commands.h | 8 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. 29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 33 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. 77 /* Tx rates */ 92 /* Multi-Station support */ 138 /* RF-KILL commands and notifications */ 184 * when sending the response to each driver-originated command, so 196 * 0:7 tfd idx - position within TX queue 199 * 14 huge - driver sets this to indicate command is in the 201 * 15 unsolicited RX or uCode-originated notification [all …]
|
/Linux-v6.1/net/mac80211/ |
D | airtime.c | 1 // SPDX-License-Identifier: ISC 4 * Copyright (C) 2021-2022 Intel Corporation 16 /* Number of kilo-symbols (symbols * 1024) for a packet with (bps) bits per 17 * symbol. We use k-symbols to avoid rounding in the _TIME macros below. 42 /* Transmission time (1024 usec) for a packet containing (ksyms) * k-symbols */ 64 * Define group sort order: HT40 -> SGI -> #streams 87 _streams - 1 92 _MAX(0, 16 - __builtin_clz(duration)) 121 (_streams) - 1) 166 (_streams) - 1) [all …]
|
/Linux-v6.1/drivers/net/wireless/broadcom/b43/ |
D | xmit.h | 1 /* SPDX-License-Identifier: GPL-2.0 */ 31 __le16 phy_ctl1_fb; /* PHY TX control word 1 for fallback rates */ 33 __le16 phy_ctl1_rts_fb; /* PHY TX control word 1 RTS for fallback rates */ 114 #define B43_TXH_MAC_SENDCTS 0x00000800 /* Send CTS-to-self */ 132 #define B43_TXH_EFT_FB_CCK 0x00 /* CCK */ 137 #define B43_TXH_EFT_RTS_CCK 0x00 /* CCK */ 142 #define B43_TXH_EFT_RTSFB_CCK 0x00 /* CCK */ 149 #define B43_TXH_PHY_ENC_CCK 0x0000 /* CCK */ 194 switch (dev->fw.hdr_format) { in b43_txhdr_size() 244 /* RSSI for A/B/G-PHYs */ [all …]
|
D | xmit.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 8 Copyright (C) 2005 Martin Langer <martin-langer@gmx.de> 45 if (e->bitrate == bitrate) in b43_tx_legacy_rate_phy_ctl_ent() 53 /* Extract the bitrate index out of a CCK PLCP header. */ 56 switch (plcp->raw[0]) { in b43_plcp_get_bitrate_idx_cck() 66 return -1; in b43_plcp_get_bitrate_idx_cck() 75 switch (plcp->raw[0] & 0xF) { in b43_plcp_get_bitrate_idx_ofdm() 93 return -1; in b43_plcp_get_bitrate_idx_ofdm() 139 __u8 *raw = plcp->raw; in b43_generate_plcp_hdr() 147 plcp->data = cpu_to_le32(d); in b43_generate_plcp_hdr() [all …]
|
D | ppr.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 13 for (i = 0, entry = &(ppr)->__all_rates[i]; \ 21 /* Compile-time PPR check */ in b43_ppr_clear() 71 struct b43_ppr_rates *rates = &ppr->rates; in b43_ppr_load_max_from_sprom() local 72 struct ssb_sprom *sprom = dev->dev->bus_sprom; in b43_ppr_load_max_from_sprom() 73 struct b43_phy *phy = &dev->phy; in b43_ppr_load_max_from_sprom() 82 maxpwr = min(sprom->core_pwr_info[0].maxpwr_2g, in b43_ppr_load_max_from_sprom() 83 sprom->core_pwr_info[1].maxpwr_2g); in b43_ppr_load_max_from_sprom() 84 sprom_ofdm_po = sprom->ofdm2gpo; in b43_ppr_load_max_from_sprom() 85 sprom_mcs_po = sprom->mcs2gpo; in b43_ppr_load_max_from_sprom() [all …]
|
D | ppr.h | 1 /* SPDX-License-Identifier: GPL-2.0 */ 16 u8 cck[B43_PPR_CCK_RATES_NUM]; member 29 struct b43_ppr_rates rates; member
|
/Linux-v6.1/drivers/staging/rtl8723bs/hal/ |
D | hal_com_phycfg.c | 1 // SPDX-License-Identifier: GPL-2.0 4 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. 23 case CCK: in PHY_GetTxPowerByRateBase() 24 value = pHalData->TxPwrByRateBase2_4G[RfPath][0]; in PHY_GetTxPowerByRateBase() 27 value = pHalData->TxPwrByRateBase2_4G[RfPath][1]; in PHY_GetTxPowerByRateBase() 30 value = pHalData->TxPwrByRateBase2_4G[RfPath][2]; in PHY_GetTxPowerByRateBase() 49 case CCK: in phy_SetTxPowerByRateBase() 50 pHalData->TxPwrByRateBase2_4G[RfPath][0] = Value; in phy_SetTxPowerByRateBase() 53 pHalData->TxPwrByRateBase2_4G[RfPath][1] = Value; in phy_SetTxPowerByRateBase() 56 pHalData->TxPwrByRateBase2_4G[RfPath][2] = Value; in phy_SetTxPowerByRateBase() [all …]
|
/Linux-v6.1/drivers/net/wireless/intel/iwlwifi/mvm/ |
D | mac-ctxt.c | 1 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause 3 * Copyright (C) 2012-2014, 2018-2022 Intel Corporation 4 * Copyright (C) 2013-2014 Intel Mobile Communications GmbH 5 * Copyright (C) 2015-2017 Intel Deutschland GmbH 10 #include "iwl-io.h" 11 #include "iwl-prph.h" 12 #include "fw-api.h" 14 #include "time-event.h" 51 if (vif == data->vif) in iwl_mvm_mac_tsf_id_iter() 70 switch (data->vif->type) { in iwl_mvm_mac_tsf_id_iter() [all …]
|
/Linux-v6.1/drivers/staging/rtl8192u/ieee80211/ |
D | rtl819x_HT.h | 1 /* SPDX-License-Identifier: GPL-2.0 */ 16 * There should be 128 bits to cover all of the MCS rates. However, since 17 * 8190 does not support too much rates, one integer is quite enough. 120 * configured as non-AP STA mode. **Note** Current_xxx should be set 136 u8 bRegSuppCCK; // Tx CCK rate capability 137 u8 bCurSuppCCK; // Tx CCK rate capability 150 // A-MSDU related 151 u8 bAMSDU_Support; // This indicates Tx A-MSDU capability 152 u16 nAMSDU_MaxSize; // This indicates Tx A-MSDU capability 153 u8 bCurrent_AMSDU_Support; // This indicates Tx A-MSDU capability [all …]
|
/Linux-v6.1/drivers/net/wireless/ath/ath5k/ |
D | pcu.c | 2 * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> 3 * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> 4 * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org> 5 * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> 6 * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> 7 * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> 40 * - Buffering of RX and TX frames (after QCU/DCUs) 42 * - Encrypting and decrypting (using the built-in engine) 44 * - Generating ACKs, RTS/CTS frames 46 * - Maintaining TSF [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/net/wireless/ |
D | mediatek,mt76.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2 # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. 5 --- 7 $schema: http://devicetree.org/meta-schemas/core.yaml# 12 - Felix Fietkau <nbd@nbd.name> 13 - Lorenzo Bianconi <lorenzo@kernel.org> 14 - Ryder Lee <ryder.lee@mediatek.com> 24 - $ref: ieee80211.yaml# 29 - mediatek,mt76 30 - mediatek,mt7628-wmac [all …]
|