| /Linux-v6.1/Documentation/devicetree/bindings/regulator/ |
| D | slg51000.txt | 15 vin6-supply: Input supply for ldo6
34 ldo6
76 ldo6 {
77 regulator-name = "ldo6";
|
| D | mt6360-regulator.yaml | 25 description: Input supply phandle(s) for LDO6/7
64 ldo6 {
65 regulator-compatible = "LDO6";
66 regulator-name = "mt6360,ldo6";
|
| D | palmas-pmic.txt | 26 - ti,ldo6-vibrator : ldo6 is in vibrator mode
66 ti,ldo6-vibrator;
|
| D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
70 LDO6 {
71 regulator-name = "ldo6";
|
| D | max8925-regulator.txt | 13 - LDO6 for LDO LDO6
|
| D | rohm,bd71847-regulator.yaml | 21 regulator-boot-on at least for BUCK5. LDO6 is supplied by it and it must
23 voltage monitoring for LDO5/LDO6 can cause PMIC to reset.
27 #LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
40 should be "ldo1", ..., "ldo6"
|
| D | twl-regulator.txt | 28 - "ti,twl6032-ldo6" for LDO6 LDO
|
| D | rohm,bd71837-regulator.yaml | 22 disabled by driver at startup. LDO5 and LDO6 are supplied by those and
23 if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
28 #LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
|
| D | tps6586x.txt | 22 - vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
115 ldo6_reg: ldo6 {
|
| /Linux-v6.1/drivers/regulator/ |
| D | tps65912-regulator.c | 20 LDO4, LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 }; enumerator
100 TPS65912_REGULATOR("LDO6", LDO6, "ldo6", tps65912_ops_ldo,
|
| D | qcom-rpmh-regulator.c | 788 RPMH_VREG("ldo6", "ldo%s6", &pmic4_pldo, "vdd-l6"),
850 RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9"),
880 RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l4-l5-l6"),
906 RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9"),
940 RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9-l10"),
964 RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l6-l9-l11"),
998 RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
1011 RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
1027 RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6"),
1058 RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l4-l5-l6"),
[all …]
|
| D | pcf50633-regulator.c | 67 PCF50633_REGULATOR("ldo6", LDO6, 900000, 100000, 0, 28),
|
| D | da9052-regulator.c | 340 DA9052_LDO(LDO6, ldo6, 50, 1200, 3600, 6, 6, 0),
357 DA9052_LDO(LDO6, ldo6, 50, 1200, 3600, 6, 6, 0),
|
| /Linux-v6.1/Documentation/devicetree/bindings/mfd/ |
| D | st,stpmic1.yaml | 97 - ldo6 for LDO LDO6
298 ldo6-supply = <&v3v3>;
324 ldo6 {
|
| D | da9052-i2c.txt | 28 ldo6 : regulator LDO6
|
| D | da9055.txt | 40 ldo6 : regulator LDO6
|
| D | rohm,bd71828-pmic.yaml | 177 ldo6: LDO6 {
178 regulator-name = "ldo6";
|
| D | mediatek,mt6360.yaml | 165 ldo6 {
166 regulator-compatible = "LDO6";
167 regulator-name = "mt6360,ldo6";
|
| D | rohm,bd71847-pmic.yaml | 222 ldo6: LDO6 {
223 regulator-name = "ldo6";
|
| D | rohm,bd71837-pmic.yaml | 232 ldo6: LDO6 {
233 regulator-name = "ldo6";
|
| D | tps65910.txt | 26 ldo6, ldo7, ldo8
46 vcc3-supply: LDO6, LDO7 and LDO8 input.
181 regulator-compatible = "ldo6";
|
| /Linux-v6.1/arch/arm64/boot/dts/freescale/ |
| D | imx8mn-ddr4-evk.dts | 151 ldo6_reg: LDO6 {
152 regulator-name = "ldo6";
|
| D | imx8mq-pico-pi.dts | 180 ldo6: LDO6 { label
181 regulator-name = "ldo6";
|
| D | imx8mq-phanbell.dts | 243 ldo6: LDO6 { label
244 regulator-name = "ldo6";
|
| /Linux-v6.1/arch/arm64/boot/dts/mediatek/ |
| D | mt8195-demo.dts | 168 mt6360_ldo6: ldo6 {
169 regulator-compatible = "LDO6";
170 regulator-name = "mt6360,ldo6";
|
