| /Linux-v6.6/drivers/rpmsg/ |
| D | qcom_smd.c | 97 * @dev: device associated with this edge
98 * @name: name of this edge
99 * @of_node: of_node handle for information related to this edge
100 * @edge_id: identifier of this edge
102 * @irq: interrupt for signals on this edge
108 * @channels: list of all channels detected on this edge
114 * @state_work: work item for edge state changes
163 struct qcom_smd_edge *edge; member
178 * @edge: qcom_smd_edge this channel is living on
200 struct qcom_smd_edge *edge; member
[all …]
|
| /Linux-v6.6/drivers/staging/media/atomisp/pci/isp/kernels/eed1_8/ |
| D | ia_css_eed1_8_types.h | 20 * CSS-API header file for Edge Enhanced Demosaic parameters.
33 /* Number of segments + 1 segment used in edge reliability enhancement
39 /* Edge Enhanced Demosaic configuration
63 s32 coring_pos0; /** Positive Edge Coring Threshold in dark region. */
64 s32 coring_pos1; /** Positive Edge Coring Threshold in bright region. */
65 s32 coring_neg0; /** Negative Edge Coring Threshold in dark region. */
66 s32 coring_neg1; /** Negative Edge Coring Threshold in bright region. */
69 s32 gain_pos0; /** Gain for Positive Edge in dark region. */
70 s32 gain_pos1; /** Gain for Positive Edge in bright region. */
71 s32 gain_neg0; /** Gain for Negative Edge in dark region. */
[all …]
|
| /Linux-v6.6/drivers/media/rc/ |
| D | gpio-ir-tx.c | 78 ktime_t edge; in gpio_ir_tx_unmodulated() local
83 edge = ktime_get(); in gpio_ir_tx_unmodulated()
88 edge = ktime_add_us(edge, txbuf[i]); in gpio_ir_tx_unmodulated()
89 delay_until(edge); in gpio_ir_tx_unmodulated()
98 ktime_t edge; in gpio_ir_tx_modulated() local
115 edge = ktime_get(); in gpio_ir_tx_modulated()
120 edge = ktime_add_us(edge, txbuf[i]); in gpio_ir_tx_modulated()
121 delay_until(edge); in gpio_ir_tx_modulated()
124 ktime_t last = ktime_add_us(edge, txbuf[i]); in gpio_ir_tx_modulated()
128 edge = ktime_add_ns(edge, pulse); in gpio_ir_tx_modulated()
[all …]
|
| /Linux-v6.6/drivers/soc/qcom/ |
| D | rpm-proc.c | 12 struct qcom_smd_edge *edge = NULL; in rpm_proc_probe() local
17 edge_node = of_get_child_by_name(dev->of_node, "smd-edge"); in rpm_proc_probe()
19 edge = qcom_smd_register_edge(dev, edge_node); in rpm_proc_probe()
21 if (IS_ERR(edge)) in rpm_proc_probe()
22 return dev_err_probe(dev, PTR_ERR(edge), in rpm_proc_probe()
23 "Failed to register smd-edge\n"); in rpm_proc_probe()
32 platform_set_drvdata(pdev, edge); in rpm_proc_probe()
35 if (edge) in rpm_proc_probe()
36 qcom_smd_unregister_edge(edge); in rpm_proc_probe()
42 struct qcom_smd_edge *edge = platform_get_drvdata(pdev); in rpm_proc_remove() local
[all …]
|
| /Linux-v6.6/drivers/staging/media/atomisp/pci/isp/kernels/ynr/ynr_2/ |
| D | ia_css_ynr2_types.h | 31 u16 edge_sense_gain_0; /** Sensitivity of edge in dark area.
34 u16 edge_sense_gain_1; /** Sensitivity of edge in bright area.
56 u16 coring_pos_0; /** Coring threshold for positive edge in dark area.
59 u16 coring_pos_1; /** Coring threshold for positive edge in bright area.
62 u16 coring_neg_0; /** Coring threshold for negative edge in dark area.
65 u16 coring_neg_1; /** Coring threshold for negative edge in bright area.
68 u16 gain_pos_0; /** Gain for positive edge in dark area.
71 u16 gain_pos_1; /** Gain for positive edge in bright area.
74 u16 gain_neg_0; /** Gain for negative edge in dark area.
77 u16 gain_neg_1; /** Gain for negative edge in bright area.
[all …]
|
| /Linux-v6.6/Documentation/devicetree/bindings/net/ |
| D | mscc-phy-vsc8531.txt | 7 with the 'edge-slowdown' property.
9 - vsc8531,edge-slowdown : % the edge should be slowed down relative to
10 the fastest possible edge time.
11 Edge rate sets the drive strength of the MAC
13 drive strength will affect the edge rate of
17 and in effect slow down the edge rate if
19 To adjust the edge-slowdown, the 'vddmac'
21 supported edge-slowdown values for a given
24 Ref: Table:1 - Edge rate change (below).
38 Table: 1 - Edge rate change
[all …]
|
| /Linux-v6.6/Documentation/devicetree/bindings/remoteproc/ |
| D | qcom,smd-edge.yaml | 4 $id: http://devicetree.org/schemas/remoteproc/qcom,smd-edge.yaml#
7 title: Qualcomm SMD Edge communication channel nodes
14 some sort - or in SMD language an "edge". The name of the edges are not
18 that "edge". The names of the devices are not important. The properties of
24 const: smd-edge
45 Name of the edge, used for debugging and identification purposes. The
65 qcom,smd-edge:
93 - qcom,smd-edge
111 smd-edge {
115 qcom,smd-edge = <1>;
|
| D | qcom,pas-common.yaml | 66 smd-edge:
67 $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
69 Qualcomm Shared Memory subnode which represents communication edge,
73 glink-edge:
74 $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
76 Qualcomm G-Link subnode which represents communication edge, channels
|
| D | qcom,msm8996-mss-pil.yaml | 134 smd-edge:
135 $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
137 Qualcomm Shared Memory subnode which represents communication edge,
141 glink-edge:
142 $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
144 Qualcomm G-Link subnode which represents communication edge, channels
236 glink-edge: false
239 - smd-edge
243 smd-edge: false
274 - glink-edge
[all …]
|
| D | qcom,rpm-proc.yaml | 95 smd-edge:
96 $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
98 Qualcomm Shared Memory subnode which represents communication edge,
101 glink-edge:
102 $ref: /schemas/remoteproc/qcom,glink-rpm-edge.yaml#
104 Qualcomm G-Link subnode which represents communication edge,
124 - smd-edge
126 - glink-edge
139 smd-edge {
142 qcom,smd-edge = <15>;
[all …]
|
| /Linux-v6.6/Documentation/gpu/dp-mst/ |
| D | topology-figure-3.dot | 6 edge [dir=none];
9 edge [dir=""];
13 edge [style=dashed];
20 edge [style=""];
29 edge [color=grey];
32 edge [color=""];
35 edge [style=dashed;dir=back];
40 edge [color=grey];
|
| D | topology-figure-2.dot | 10 edge [style=dashed];
18 edge [style=""];
27 edge [color=red];
30 edge [color=""];
33 edge [style=dashed;dir=back];
37 edge [color=red];
|
| /Linux-v6.6/drivers/irqchip/ |
| D | qcom-pdc.c | 105 * GIC does not handle falling edge or active low. To allow falling edge and
107 * falling edge into a rising edge and active low into an active high.
111 * Rising edge sensitive NOT USED
112 * Falling edge sensitive LOW
113 * Dual Edge sensitive NOT USED
115 * Falling Edge sensitive NOT USED
116 * Rising edge sensitive HIGH
117 * Dual Edge sensitive HIGH
133 * If @type is edge triggered, forward that as Rising edge as PDC
134 * takes care of converting falling edge to rising edge signal
[all …]
|
| /Linux-v6.6/Documentation/devicetree/bindings/soc/fsl/cpm_qe/ |
| D | fsl,cpm1-tsa.yaml | 96 fsl,clock-falling-edge:
99 Data is sent on falling edge of the clock (and received on the rising
100 edge). If 'clock-falling-edge' is not present, data is sent on the
101 rising edge (and received on the falling edge).
103 fsl,fsync-rising-edge:
106 Frame sync pulses are sampled with the rising edge of the channel
107 clock. If 'fsync-rising-edge' is not present, pulses are sampled with
108 the falling edge.
193 fsl,fsync-rising-edge;
|
| /Linux-v6.6/drivers/staging/media/atomisp/pci/isp/kernels/cnr/cnr_2/ |
| D | ia_css_cnr2_types.h | 25 * Small sensitivity of edge means strong smoothness and NR performance.
41 u16 sense_gain_vy; /** Sensitivity of horizontal edge of Y.
43 u16 sense_gain_vu; /** Sensitivity of horizontal edge of U.
45 u16 sense_gain_vv; /** Sensitivity of horizontal edge of V.
47 u16 sense_gain_hy; /** Sensitivity of vertical edge of Y.
49 u16 sense_gain_hu; /** Sensitivity of vertical edge of U.
51 u16 sense_gain_hv; /** Sensitivity of vertical edge of V.
|
| /Linux-v6.6/drivers/net/ieee802154/ |
| D | mac802154_hwsim.h | 14 * @MAC802154_HWSIM_CMD_SET_EDGE: change edge parameters during runtime
16 * @MAC802154_HWSIM_CMD_NEW_EDGE: create a new edge between two radios
43 * edge information according the radio id
56 /* mac802154 hwsim edge netlink attributes
59 * @MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID: radio id where the edge points to
61 * receive for this edge
|
| /Linux-v6.6/drivers/staging/sm750fb/ |
| D | ddk750_sii164.c | 79 * edge_select - Edge Select:
80 * 0 = Input data is falling edge latched (falling
81 * edge latched first in dual edge mode)
82 * 1 = Input data is rising edge latched (rising
83 * edge latched first in dual edge mode)
87 * dual_edge_clk_select - Dual Edge Clock Select
88 * 0 = Input data is single edge latched
89 * 1 = Input data is dual edge latched
149 /* Select the edge */ in sii164_init_chip()
161 /* Select Dual/Single Edge Clock */ in sii164_init_chip()
|
| /Linux-v6.6/Documentation/devicetree/bindings/gpio/ |
| D | cavium-octeon-gpio.txt | 21 1 - edge triggered on the rising edge.
22 2 - edge triggered on the falling edge
37 * 2) Triggering (1 - edge rising
38 * 2 - edge falling
|
| /Linux-v6.6/drivers/media/pci/cobalt/ |
| D | cobalt-irq.c | 140 u32 edge = cobalt_read_bar1(cobalt, COBALT_SYS_STAT_EDGE); in cobalt_irq_handler() local
145 cobalt_write_bar1(cobalt, COBALT_SYS_STAT_MASK, mask & ~edge); in cobalt_irq_handler()
146 cobalt_write_bar1(cobalt, COBALT_SYS_STAT_EDGE, edge); in cobalt_irq_handler()
158 edge &= ~dma_fifo_mask; in cobalt_irq_handler()
160 mask & ~edge); in cobalt_irq_handler()
165 if (edge & s->adv_irq_mask) in cobalt_irq_handler()
167 if ((edge & mask & dma_fifo_mask) && vb2_is_streaming(&s->q)) { in cobalt_irq_handler()
175 if (edge & mask & (COBALT_SYSSTAT_VI0_INT1_MSK | in cobalt_irq_handler()
182 if (edge & mask & (COBALT_SYSSTAT_VI0_INT2_MSK | in cobalt_irq_handler()
188 if (edge & mask & COBALT_SYSSTAT_VOHSMA_INT1_MSK) in cobalt_irq_handler()
[all …]
|
| /Linux-v6.6/Documentation/devicetree/bindings/sound/ |
| D | tlv320adcx140.yaml | 65 ti,pdm-edge-select:
67 Defines the PDMCLK sampling edge configuration for the PDM inputs. This
70 0 - (default) Odd channel is latched on the negative edge and even
71 channel is latched on the positive edge.
72 1 - Odd channel is latched on the positive edge and even channel is
73 latched on the negative edge.
75 PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data
76 PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data
77 PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
78 PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
[all …]
|
| /Linux-v6.6/drivers/infiniband/hw/mlx5/ |
| D | wr.h | 20 /* get_sq_edge - Get the next nearby edge.
22 * An 'edge' is defined as the first following address after the end
25 * simply should check if it gets to an edge.
31 * The new edge.
44 /* handle_post_send_edge - Check if we get to SQ edge. If yes, update to the
45 * next nearby edge and get new address translation for current WQE position.
49 * @cur_edge: Updated current edge.
68 * @cur_edge: Updated current edge.
|
| /Linux-v6.6/include/linux/mfd/pcf50633/ |
| D | core.h | 171 PCF50633_INT2_ONKEYR = 0x01, /* ONKEY rising edge */
172 PCF50633_INT2_ONKEYF = 0x02, /* ONKEY falling edge */
173 PCF50633_INT2_EXTON1R = 0x04, /* EXTON1 rising edge */
174 PCF50633_INT2_EXTON1F = 0x08, /* EXTON1 falling edge */
175 PCF50633_INT2_EXTON2R = 0x10, /* EXTON2 rising edge */
176 PCF50633_INT2_EXTON2F = 0x20, /* EXTON2 falling edge */
177 PCF50633_INT2_EXTON3R = 0x40, /* EXTON3 rising edge */
178 PCF50633_INT2_EXTON3F = 0x80, /* EXTON3 falling edge */
|
| /Linux-v6.6/drivers/gpio/ |
| D | gpio-mxs.c | 72 int edge; in mxs_gpio_set_irq_type() local
83 edge = GPIO_INT_FALL_EDGE; in mxs_gpio_set_irq_type()
85 edge = GPIO_INT_RISE_EDGE; in mxs_gpio_set_irq_type()
89 edge = GPIO_INT_RISE_EDGE; in mxs_gpio_set_irq_type()
92 edge = GPIO_INT_FALL_EDGE; in mxs_gpio_set_irq_type()
95 edge = GPIO_INT_LOW_LEV; in mxs_gpio_set_irq_type()
98 edge = GPIO_INT_HIGH_LEV; in mxs_gpio_set_irq_type()
104 /* set level or edge */ in mxs_gpio_set_irq_type()
106 if (edge & GPIO_INT_LEV_MASK) { in mxs_gpio_set_irq_type()
116 if (edge & GPIO_INT_POL_MASK) in mxs_gpio_set_irq_type()
[all …]
|
| D | gpio-mxc.c | 167 int edge; in gpio_set_irq_type() local
173 edge = GPIO_INT_RISE_EDGE; in gpio_set_irq_type()
176 edge = GPIO_INT_FALL_EDGE; in gpio_set_irq_type()
180 edge = GPIO_INT_BOTH_EDGES; in gpio_set_irq_type()
184 edge = GPIO_INT_LOW_LEV; in gpio_set_irq_type()
187 edge = GPIO_INT_HIGH_LEV; in gpio_set_irq_type()
194 edge = GPIO_INT_LOW_LEV; in gpio_set_irq_type()
197 edge = GPIO_INT_HIGH_LEV; in gpio_set_irq_type()
207 if (edge == GPIO_INT_BOTH_EDGES) in gpio_set_irq_type()
215 if (edge != GPIO_INT_BOTH_EDGES) { in gpio_set_irq_type()
[all …]
|
| /Linux-v6.6/Documentation/devicetree/bindings/display/panel/ |
| D | panel-timing.yaml | 170 Data driving on rising or falling edge.
171 Use 0 to drive pixel data on falling edge and
172 sample data on rising edge.
173 Use 1 to drive pixel data on rising edge and
174 sample data on falling edge
180 Drive sync on rising or sample sync on falling edge.
182 Use 0 to drive sync on falling edge and
183 sample sync on rising edge of pixel clock.
184 Use 1 to drive sync on rising edge and
185 sample sync on falling edge of pixel clock
|
