| /Linux-v6.1/Documentation/devicetree/bindings/usb/ |
| D | aspeed,usb-vhub.yaml | 16 the Virtual Hub's downstream USB devices.
19 revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices
20 and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream
39 aspeed,vhub-downstream-ports:
40 description: Number of downstream ports supported by the Virtual Hub
107 - aspeed,vhub-downstream-ports
120 aspeed,vhub-downstream-ports = <5>;
|
| /Linux-v6.1/drivers/pci/pcie/ |
| D | Kconfig | 10 Management Events, and Downstream Port Containment.
118 bool "PCI Express Downstream Port Containment support"
121 This enables PCI Express Downstream Port Containment (DPC)
122 driver support. DPC events from Root and Downstream ports
141 in the Downstream Port Containment Related Enhancements ECN to
|
| D | aspm.c | 31 #define ASPM_STATE_L0S_DW (2) /* Downstream direction L0s state */
47 struct pci_dev *downstream; /* Downstream component, function 0 */ member
244 /* Check downstream component if bit Slot Clock Configuration is 1 */ in pcie_aspm_configure_common_clock()
272 /* Configure downstream component, all functions */ in pcie_aspm_configure_common_clock()
435 /* Check downstream direction L0s latency */ in pcie_aspm_check_latency()
502 struct pci_dev *child = link->downstream, *parent = link->pdev; in aspm_calc_l1ss_info()
534 * downstream devices report (via LTR) that they can tolerate at in aspm_calc_l1ss_info()
574 struct pci_dev *child = link->downstream, *parent = link->pdev; in aspm_l1ss_init()
631 struct pci_dev *child = link->downstream, *parent = link->pdev; in pcie_aspm_cap_init()
656 * Re-read upstream/downstream components' register state after in pcie_aspm_cap_init()
[all …]
|
| D | portdrv.h | 21 #define PCIE_PORT_SERVICE_DPC_SHIFT 3 /* Downstream Port Containment */
61 struct pci_dev *port; /* Root/Upstream/Downstream Port */
|
| /Linux-v6.1/arch/arm64/boot/dts/freescale/ |
| D | fsl-ls2080a.dtsi | 126 ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */
134 ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */
142 ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */
150 ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
|
| /Linux-v6.1/include/uapi/linux/usb/ |
| D | charger.h | 11 * SDP (Standard Downstream Port)
13 * CDP (Charging Downstream Port)
|
| /Linux-v6.1/arch/arm/mach-omap2/ |
| D | clockdomain.c | 938 * into active or idle states, as needed by downstream clocks. If the
939 * clockdomain has any downstream clocks enabled in the clock
980 * active or idle states, as needed by downstream clocks. If the
981 * clockdomain has any downstream clocks enabled in the clock
998 * downstream clocks enabled in the clock framework, wkdep/sleepdep
1036 * downstream clocks enabled in the clock framework, wkdep/sleepdep
1151 * clkdm_clk_enable - add an enabled downstream clock to this clkdm
1153 * @clk: struct clk * of the enabled downstream clock
1192 * clkdm_clk_disable - remove an enabled downstream clock from this clkdm
1194 * @clk: struct clk * of the disabled downstream clock
[all …]
|
| /Linux-v6.1/Documentation/admin-guide/perf/ |
| D | hisi-pcie-pmu.rst | 9 all Endpoints downstream these Root Ports.
51 PMU could only monitor the performance of traffic downstream target Root Ports
52 or downstream target Endpoint. PCIe PMU driver support "port" and "bdf"
|
| /Linux-v6.1/Documentation/ABI/testing/ |
| D | usb-charger-uevent | 14 USB_CHARGER_SDP_TYPE Standard Downstream Port
15 USB_CHARGER_CDP_TYPE Charging Downstream Port
|
| D | sysfs-bus-usb-lvstest | 16 Set "U1 timeout" for the downstream port where Link Layer
24 Set "U2 timeout" for the downstream port where Link Layer
|
| /Linux-v6.1/Documentation/devicetree/bindings/i2c/ |
| D | i2c-mux-ltc4306.txt | 24 - ltc,downstream-accelerators-enable: Enables the rise time accelerators
25 on the downstream port.
|
| /Linux-v6.1/drivers/media/pci/cx88/ |
| D | cx88-reg.h | 213 #define MO_AUDD_DMA 0x320000 // {64}RWp Audio downstream
215 #define MO_AUDR_DMA 0x320010 // {64}RWp Audio RDS (downstream)
433 #define MO_TS_DMA 0x330000 // {64}RWp Transport stream downstream
451 #define MO_VIPD_DMA 0x340000 // {64}RWp VIP downstream
461 #define MO_VIPD_CNTRL 0x340050 // VIP downstream control #2
462 #define MO_VIPD_LNGTH 0x340054 // VIP downstream line length
519 #define MO_GPHSTD_DMA 0x350000 // {64}RWp Host downstream
522 #define MO_GPHSTD_CNTRL 0x38004C // Host downstream control #2
523 #define MO_GPHSTD_LNGTH 0x380050 // Host downstream line length
|
| /Linux-v6.1/drivers/net/ipa/data/ |
| D | ipa_data-v3.1.c | 264 .min = 5, .max = 5, /* 3 downstream */
267 .min = 5, .max = 5, /* 7 downstream */
330 .min = 3, .max = 3, /* 2 downstream */
336 .min = 1, .max = 1, /* 0 downstream */
338 /* IPA_RSRC_GROUP_DST_DMA uses 2 downstream */
|
| /Linux-v6.1/drivers/gpu/drm/display/ |
| D | drm_dp_helper.c | 757 * drm_dp_downstream_is_type() - is the downstream facing port of certain type?
767 * Returns: whether the downstream facing port matches the type.
779 * drm_dp_downstream_is_tmds() - is the downstream facing port TMDS?
784 * Returns: whether the downstream facing port is TMDS (HDMI/DVI).
959 * drm_dp_read_downstream_info() - read DPCD downstream port info if available
962 * @downstream_ports: buffer to store the downstream port info in
968 * Returns: 0 if either the downstream port info was read successfully or
969 * there was no downstream info to read, or a negative error code otherwise.
980 /* No downstream info to read */ in drm_dp_read_downstream_info()
984 /* Some branches advertise having 0 downstream ports, despite also advertising they have a in drm_dp_read_downstream_info()
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/power/supply/ |
| D | gpio-charger.yaml | 27 - usb-sdp # USB standard downstream port
29 - usb-cdp # USB charging downstream port
|
| /Linux-v6.1/drivers/thunderbolt/ |
| D | acpi.c | 68 * expect. It should either be xHCI or PCIe root/downstream in tb_acpi_add_link()
310 * Device routers exists under the downstream facing USB4 port in tb_acpi_switch_find_companion()
341 * Device (DFP0) // Downstream port _ADR == lane 0 adapter in tb_acpi_find_companion()
344 * Device (DFP1) // Downstream port _ADR == lane 0 adapter number in tb_acpi_find_companion()
|
| D | debugfs.c | 953 struct tb_port *upstream, *downstream; in margining_switch_init() local
962 downstream = tb_port_at(route, parent_sw); in margining_switch_init()
964 margining_port_init(downstream); in margining_switch_init()
971 struct tb_port *downstream; in margining_switch_remove() local
979 * remove the downstream port margining directory. in margining_switch_remove()
982 downstream = tb_port_at(route, parent_sw); in margining_switch_remove()
983 margining_port_remove(downstream); in margining_switch_remove()
989 struct tb_port *downstream; in margining_xdomain_init() local
992 downstream = tb_port_at(xd->route, parent_sw); in margining_xdomain_init()
994 margining_port_init(downstream); in margining_xdomain_init()
[all …]
|
| D | tunnel.h | 39 * @max_down: Maximum downstream bandwidth (Mb/s) available for the tunnel.
42 * @allocated_down: Allocated downstream bandwidth (only for USB3)
|
| D | usb4.c | 176 /* Check for any connected downstream ports for USB4 wake */ in usb4_switch_check_wakes()
375 * Enable wakes coming from all USB4 downstream ports (from in usb4_switch_set_wake()
914 * usb4_switch_map_pcie_down() - Map USB4 port to a PCIe downstream adapter
919 * downstream adapters where the PCIe topology is extended. This
920 * function returns the corresponding downstream PCIe adapter or %NULL
945 * usb4_switch_map_usb3_down() - Map USB4 port to a USB3 downstream adapter
950 * downstream adapters where the USB 3.x topology is extended. This
951 * function returns the corresponding downstream USB 3.x adapter or
1030 * usb4_port_unlock() - Unlock USB4 downstream port
1033 * Unlocks USB4 downstream port so that the connection manager can
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/display/bridge/ |
| D | fsl,imx8qxp-pxl2dpi.yaml | 37 A phandle which points to companion PXL2DPI which is used by downstream
50 description: The PXL2DPI output port node to downstream bridge.
|
| /Linux-v6.1/Documentation/devicetree/bindings/pci/ |
| D | pci.txt | 32 root port to downstream device and host bridge drivers can do programming
69 downstream of this port are external to the machine. The OS can, for
|
| /Linux-v6.1/drivers/gpu/drm/msm/ |
| D | NOTES | 77 the downstream android fbdev driver), bitfield sizes, etc. My current
85 parse logged register reads/writes (both from downstream android fbdev
|
| /Linux-v6.1/arch/arm64/boot/dts/qcom/ |
| D | msm8994-sony-xperia-kitakami.dtsi | 72 /* This is for getting crash logs using Android downstream kernels */
160 * specific downstream MDSS/backlight nodes in the active DTB.
162 * LK with the downstream DTB appended and then, only from there, load
460 * Downstream pushes 2.95V to the sdhci device,
|
| /Linux-v6.1/Documentation/driver-api/driver-model/ |
| D | overview.rst | 38 Downstream Access
71 downstream driver would break. On the other hand, if only the bus layer
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | spear1310.dtsi | 91 ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
108 ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */
125 ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */
|
