| /Linux-v5.10/arch/arm/boot/dts/ |
| D | bcm2836.dtsi | 48 clock-frequency = <800000000>;
55 clock-frequency = <800000000>;
62 clock-frequency = <800000000>;
69 clock-frequency = <800000000>;
|
| D | exynos5800.dtsi | 66 opp-800000000 {
120 opp-800000000 {
|
| D | nuvoton-common-npcm7xx.dtsi | 24 clock-frequency = <800000000>;
32 clock-frequency = <800000000>;
|
| D | exynos5260.dtsi | 300 assigned-clock-rates = <0>, <0>, <800000000>;
320 assigned-clock-rates = <0>, <0>, <800000000>;
340 assigned-clock-rates = <0>, <0>, <800000000>;
|
| D | omap36xx.dtsi | 62 opp130-800000000 {
63 opp-hz = /bits/ 64 <800000000>;
|
| /Linux-v5.10/Documentation/devicetree/bindings/ddr/ |
| D | lpddr3-timings.txt | 36 timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
38 reg = <800000000>; /* workaround: it shows max-freq */
|
| D | lpddr3.txt | 77 timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
80 reg = <800000000>;
|
| /Linux-v5.10/drivers/clk/mvebu/ |
| D | mv98dx3236.c | 54 800000000,
56 800000000,
64 800000000,
|
| D | dove.c | 98 800000000, 800000000, 800000000,
|
| D | kirkwood.c | 97 800000000,
151 800000000,
|
| D | armada-370.c | 58 800000000,
|
| D | armada-375.c | 66 800000000,
|
| /Linux-v5.10/Documentation/devicetree/bindings/clock/ |
| D | nuvoton,npcm750-clk.txt | 54 clock-frequency = <800000000>;
62 clock-frequency = <800000000>;
|
| /Linux-v5.10/Documentation/devicetree/bindings/cpufreq/ |
| D | ti-cpufreq.txt | 121 oppturbo-800000000 {
122 opp-hz = /bits/ 64 <800000000>;
|
| /Linux-v5.10/arch/arm64/boot/dts/freescale/ |
| D | imx8mq.dtsi | 156 opp-800000000 {
157 opp-hz = /bits/ 64 <800000000>;
611 <800000000>;
1139 assigned-clock-rates = <800000000>, <800000000>,
1140 <800000000>, <800000000>, <0>;
1230 <800000000>, <0>;
|
| /Linux-v5.10/Documentation/devicetree/bindings/mmc/ |
| D | microchip,dw-sparx5-sdhci.yaml | 63 assigned-clock-rates = <800000000>;
|
| /Linux-v5.10/Documentation/devicetree/bindings/interconnect/ |
| D | fsl,imx8m-noc.yaml | 88 opp-hz = /bits/ 64 <800000000>;
|
| /Linux-v5.10/Documentation/devicetree/bindings/display/imx/ |
| D | nxp,imx8mq-dcss.yaml | 100 assigned-clock-rates = <800000000>,
|
| /Linux-v5.10/arch/arm64/boot/dts/rockchip/ |
| D | rk3399-opp.dtsi | 101 opp-hz = /bits/ 64 <800000000>;
|
| D | rk3399-op1-opp.dtsi | 109 opp-hz = /bits/ 64 <800000000>;
|
| /Linux-v5.10/drivers/clk/tegra/ |
| D | clk-tegra114.c | 179 .input_max = 800000000,
291 { 12000000, 800000000, 66, 1, 1, 0 }, /* actual: 792.0 MHz */
292 { 13000000, 800000000, 61, 1, 1, 0 }, /* actual: 793.0 MHz */
293 { 16800000, 800000000, 47, 1, 1, 0 }, /* actual: 789.6 MHz */
294 { 19200000, 800000000, 41, 1, 1, 0 }, /* actual: 787.2 MHz */
295 { 26000000, 800000000, 61, 2, 1, 0 }, /* actual: 793.0 MHz */
496 .input_max = 800000000,
|
| D | clk-tegra210.c | 1604 .input_max = 800000000,
1789 .input_max = 800000000,
1813 { 12000000, 800000000, 66, 1, 1, 0 }, /* actual: 792.0 MHz */
1814 { 13000000, 800000000, 61, 1, 1, 0 }, /* actual: 793.0 MHz */
1819 { 38400000, 800000000, 125, 3, 2, 0 },
1846 .vco_min = 800000000,
1873 .vco_min = 800000000,
1915 .input_max = 800000000,
1952 .input_max = 800000000,
1991 .input_max = 800000000,
[all …]
|
| D | clk-tegra124.c | 183 .input_max = 800000000,
217 .input_max = 800000000,
393 { 12000000, 800000000, 66, 1, 1, 0 }, /* actual: 792.0 MHz */
394 { 13000000, 800000000, 61, 1, 1, 0 }, /* actual: 793.0 MHz */
395 { 16800000, 800000000, 47, 1, 1, 0 }, /* actual: 789.6 MHz */
396 { 19200000, 800000000, 41, 1, 1, 0 }, /* actual: 787.2 MHz */
397 { 26000000, 800000000, 61, 2, 1, 0 }, /* actual: 793.0 MHz */
|
| /Linux-v5.10/Documentation/devicetree/bindings/media/ |
| D | mediatek-vcodec.txt | 80 assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
|
| /Linux-v5.10/drivers/media/tuners/ |
| D | tda18250.c | 281 utmp = (c->frequency < 800000000) ? 6 : 4; in tda18250_set_agc()
308 } else if (c->frequency < 800000000) { in tda18250_set_agc()
348 (c->frequency > 800000000) ? 0x40 : 0x20); in tda18250_set_agc()
|
