Home
last modified time | relevance | path

Searched +full:0 +full:xfb000000 (Results 1 – 25 of 35) sorted by relevance

12

/Linux-v5.10/arch/mips/boot/dts/loongson/
Dloongson64c-package.dtsi10 #address-cells = <0>;
20 ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
21 0 0x3ff00000 0 0x3ff00000 0x100000
23 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000
25 0x1efd 0xfb000000 0x1efd 0xfb000000 0x10000000>;
29 reg = <0 0x3ff01400 0x64>;
38 loongson,parent_int_map = <0xf0ffffff>, /* int0 */
39 <0x0f000000>, /* int1 */
40 <0x00000000>, /* int2 */
41 <0x00000000>; /* int3 */
[all …]
Dloongson64g-package.dtsi10 #address-cells = <0>;
20 ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
21 0 0x3ff00000 0 0x3ff00000 0x100000
22 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>;
26 reg = <0 0x3ff01400 0x64>;
35 loongson,parent_int_map = <0x00ffffff>, /* int0 */
36 <0xff000000>, /* int1 */
37 <0x00000000>, /* int2 */
38 <0x00000000>; /* int3 */
44 reg = <0 0x1fe00100 0x10>;
[all …]
Dloongson64v_4core_virtio.dts12 #address-cells = <0>;
22 ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
23 0 0x3ff00000 0 0x3ff00000 0x100000
24 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>;
28 reg = <0 0x3ff01400 0x64>;
37 loongson,parent_int_map = <0x00000001>, /* int0 */
38 <0xfffffffe>, /* int1 */
39 <0x00000000>, /* int2 */
40 <0x00000000>; /* int3 */
46 reg = <0 0x1fe001e0 0x8>;
[all …]
/Linux-v5.10/arch/arm/mach-footbridge/include/mach/
Dhardware.h13 * 0xff800000 0x40000000 1MB X-Bus
14 * 0xff000000 0x7c000000 1MB PCI I/O space
15 * 0xfe000000 0x42000000 1MB CSR
16 * 0xfd000000 0x78000000 1MB Outbound write flush (not supported)
17 * 0xfc000000 0x79000000 1MB PCI IACK/special space
18 * 0xfb000000 0x7a000000 16MB PCI Config type 1
19 * 0xfa000000 0x7b000000 16MB PCI Config type 0
20 * 0xf9000000 0x50000000 1MB Cache flush
21 * 0xf0000000 0x80000000 16MB ISA memory
30 #define XBUS_SIZE 0x00100000
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/net/
Dmarvell,prestera.txt21 ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
23 packet-processor@0 {
25 reg = <0 0x4000000>;
45 ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
46 reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
73 that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
76 ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
77 0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
78 0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
79 phys = <&cp0_comphy0 0>;
/Linux-v5.10/Documentation/x86/
Dmtrr.rst73 reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1
74 reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1
78 # echo "base=0xf8000000 size=0x400000 type=write-combining" >! /proc/mtrr
82 # echo "base=0xf8000000 size=0x400000 type=write-combining" >| /proc/mtrr
87 reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1
88 reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1
89 reg02: base=0xf8000000 (3968MB), size= 4MB: write-combining, count=1
91 This is for video RAM at base address 0xf8000000 and size 4 megabytes. To
96 (--) S3: PCI: 968 rev 0, Linear FB @ 0xf8000000
107 That's 4 megabytes, which is 0x400000 bytes (in hexadecimal).
[all …]
/Linux-v5.10/drivers/gpu/drm/nouveau/dispnv50/
Dhandles.h10 #define NV50_DISP_HANDLE_SYNCBUF 0xf0000000
11 #define NV50_DISP_HANDLE_VRAM 0xf0000001
13 #define NV50_DISP_HANDLE_WNDW_CTX(kind) (0xfb000000 | kind)
14 #define NV50_DISP_HANDLE_CRC_CTX(head, i) (0xfc000000 | head->base.index << 1 | i)
/Linux-v5.10/arch/arm/mach-omap2/
Diomap.h33 #define OMAP2_L3_IO_OFFSET 0x90000000
36 #define OMAP2_L4_IO_OFFSET 0xb2000000
39 #define OMAP4_L3_IO_OFFSET 0xb4000000
42 #define AM33XX_L4_WK_IO_OFFSET 0xb5000000
45 #define OMAP4_L3_PER_IO_OFFSET 0xb1100000
48 #define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
58 #define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
61 #define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
65 #define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
70 /* 0x6e000000 --> 0xfe000000 */
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/spi/
Dnuvoton,npcm-fiu.txt12 - #size-cells : should be 0.
20 - pinctrl-0 : phandle referencing pin configuration of the device.
29 fiu0 represent fiu 0 controller
37 #size-cells = <0>;
38 reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>;
42 pinctrl-0 = <&spi3_pins>;
43 spi-nor@0 {
/Linux-v5.10/Documentation/devicetree/bindings/pci/
Dcdns,cdns-pcie-host.yaml47 bus-range = <0x0 0xff>;
48 linux,pci-domain = <0>;
49 vendor-id = <0x17cd>;
50 device-id = <0x0200>;
52 reg = <0x0 0xfb000000 0x0 0x01000000>,
53 <0x0 0x41000000 0x0 0x00001000>;
56 ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
57 <0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
58 dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
60 #interrupt-cells = <0x1>;
[all …]
/Linux-v5.10/arch/arm/mach-spear/include/mach/
Dspear.h21 #define SPEAR_ICM1_2_BASE UL(0xD0000000)
22 #define VA_SPEAR_ICM1_2_BASE IOMEM(0xFD000000)
23 #define SPEAR_ICM1_UART_BASE UL(0xD0000000)
25 #define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
28 #define SPEAR_ICM3_ML1_2_BASE UL(0xF0000000)
29 #define VA_SPEAR6XX_ML_CPU_BASE IOMEM(0xF0000000)
32 #define SPEAR_ICM3_SMI_CTRL_BASE UL(0xFC000000)
33 #define VA_SPEAR_ICM3_SMI_CTRL_BASE IOMEM(0xFC000000)
34 #define SPEAR_ICM3_DMA_BASE UL(0xFC400000)
35 #define SPEAR_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
[all …]
/Linux-v5.10/arch/arm/mach-spear/
Dspear13xx.c41 writel_relaxed(0x06, VA_L2CC_BASE + L310_PREFETCH_CTRL); in spear13xx_l2x0_init()
47 writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL); in spear13xx_l2x0_init()
48 writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL); in spear13xx_l2x0_init()
49 l2x0_init(VA_L2CC_BASE, 0x30a00001, 0xfe0fffff); in spear13xx_l2x0_init()
55 * 0xB3000000 0xF9000000
56 * 0xE0000000 0xFD000000
57 * 0xEC000000 0xFC000000
58 * 0xED000000 0xFB000000
/Linux-v5.10/Documentation/devicetree/bindings/display/bridge/
Dcdns,mhdp8546.yaml69 const: 0
71 port@0:
97 - port@0
142 reg = <0xf0 0xfb000000 0x0 0x1000000>;
151 #size-cells = <0>;
153 port@0 {
154 reg = <0>;
/Linux-v5.10/arch/powerpc/boot/dts/fsl/
Dkmcoge4.dts30 size = <0 0x1000000>;
31 alignment = <0 0x1000000>;
34 size = <0 0x400000>;
35 alignment = <0 0x400000>;
38 size = <0 0x2000000>;
39 alignment = <0 0x2000000>;
44 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
48 ranges = <0x0 0xf 0xf4000000 0x200000>;
52 ranges = <0x0 0xf 0xf4200000 0x200000>;
56 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
[all …]
Dkmcent2.dts27 size = <0 0x1000000>;
28 alignment = <0 0x1000000>;
31 size = <0 0x400000>;
32 alignment = <0 0x400000>;
35 size = <0 0x2000000>;
36 alignment = <0 0x2000000>;
41 reg = <0xf 0xfe124000 0 0x2000>;
42 ranges = <0 0 0xf 0xe8000000 0x04000000
43 1 0 0xf 0xfa000000 0x00010000
44 2 0 0xf 0xfb000000 0x00010000
[all …]
/Linux-v5.10/arch/powerpc/platforms/embedded6xx/
Dmpc7448_hpc2.c45 #define DBG(fmt...) do { printk(fmt); } while(0)
47 #define DBG(fmt...) do { } while(0)
50 #define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
55 if (bus == 0 && PCI_SLOT(devfn) == 0) in mpc7448_hpc2_exclude_device()
65 ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0); in mpc7448_hpc2_setup_arch()
72 tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0); in mpc7448_hpc2_setup_arch()
76 ppc_md.progress("tsi108: resources set", 0x100); in mpc7448_hpc2_setup_arch()
92 * TSI108:PB_INT[0] -> CPU0:INT#
106 mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | in mpc7448_hpc2_init_IRQ()
108 24, 0, in mpc7448_hpc2_init_IRQ()
[all …]
/Linux-v5.10/arch/sh/kernel/cpu/sh2/
Dsetup-sh7619.c18 UNUSED = 0,
49 { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
50 { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
51 { 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } },
52 { 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } },
53 { 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } },
54 { 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
55 { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
67 DEFINE_RES_MEM(0xf8400000, 0x100),
73 .id = 0,
[all …]
/Linux-v5.10/arch/powerpc/include/asm/
Dkvm_book3s.h66 * iff the exit map is 0 without taking a lock.
137 #define VSID_REAL 0x07ffffffffc00000ULL
138 #define VSID_BAT 0x07ffffffffb00000ULL
139 #define VSID_64K 0x0800000000000000ULL
140 #define VSID_1T 0x1000000000000000ULL
141 #define VSID_REAL_DR 0x2000000000000000ULL
142 #define VSID_REAL_IR 0x4000000000000000ULL
143 #define VSID_PR 0x8000000000000000ULL
414 #define OSI_SC_MAGIC_R3 0x113724FA
415 #define OSI_SC_MAGIC_R4 0x77810F9B
[all …]
/Linux-v5.10/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/
Dtable.c7 0x024, 0x0011800f,
8 0x028, 0x00ffdb83,
9 0x800, 0x80040002,
10 0x804, 0x00000003,
11 0x808, 0x0000fc00,
12 0x80c, 0x0000000a,
13 0x810, 0x10005388,
14 0x814, 0x020c3d10,
15 0x818, 0x02200385,
16 0x81c, 0x00000000,
[all …]
/Linux-v5.10/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/
Dtable.c7 0x024, 0x0011800f,
8 0x028, 0x00ffdb83,
9 0x800, 0x80040002,
10 0x804, 0x00000003,
11 0x808, 0x0000fc00,
12 0x80c, 0x0000000a,
13 0x810, 0x10000330,
14 0x814, 0x020c3d10,
15 0x818, 0x02200385,
16 0x81c, 0x00000000,
[all …]
/Linux-v5.10/drivers/net/wireless/realtek/rtlwifi/rtl8723be/
Dtable.c8 0x800, 0x80040000,
9 0x804, 0x00000003,
10 0x808, 0x0000FC00,
11 0x80C, 0x0000000A,
12 0x810, 0x10001331,
13 0x814, 0x020C3D10,
14 0x818, 0x02200385,
15 0x81C, 0x00000000,
16 0x820, 0x01000100,
17 0x824, 0x00190204,
[all …]
/Linux-v5.10/arch/arm/probes/
Ddecode-thumb.c20 DECODE_REJECT (0xfe4f0000, 0xe80f0000),
24 DECODE_REJECT (0xffc00000, 0xe8000000),
27 DECODE_REJECT (0xffc00000, 0xe9800000),
30 DECODE_REJECT (0xfe508000, 0xe8008000),
32 DECODE_REJECT (0xfe50c000, 0xe810c000),
34 DECODE_REJECT (0xfe402000, 0xe8002000),
40 DECODE_CUSTOM (0xfe400000, 0xe8000000, PROBES_T32_LDMSTM),
50 DECODE_OR (0xff600000, 0xe8600000),
53 DECODE_EMULATEX (0xff400000, 0xe9400000, PROBES_T32_LDRDSTRD,
54 REGS(NOPCWB, NOSPPC, NOSPPC, 0, 0)),
[all …]
/Linux-v5.10/arch/arm/mach-cns3xxx/
Dcns3xxx.h12 #define CNS3XXX_FLASH_BASE 0x10000000 /* Flash/SRAM Memory Bank 0 */
15 #define CNS3XXX_DDR2SDRAM_BASE 0x20000000 /* DDR2 SDRAM Memory */
17 #define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */
19 #define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */
21 #define CNS3XXX_PPE_BASE 0x70001000 /* HANT */
23 #define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */
25 #define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */
27 #define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */
29 #define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */
31 #define SMC_MEMC_STATUS_OFFSET 0x000
[all …]
/Linux-v5.10/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/
Dtable.c6 0x800, 0x80040000,
7 0x804, 0x00000003,
8 0x808, 0x0000FC00,
9 0x80C, 0x0000000A,
10 0x810, 0x10001331,
11 0x814, 0x020C3D10,
12 0x818, 0x02200385,
13 0x81C, 0x00000000,
14 0x820, 0x01000100,
15 0x824, 0x00390204,
[all …]
/Linux-v5.10/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/
Dtable.c7 0x800, 0x80040000,
8 0x804, 0x00000003,
9 0x808, 0x0000fc00,
10 0x80c, 0x0000000a,
11 0x810, 0x10005388,
12 0x814, 0x020c3d10,
13 0x818, 0x02200385,
14 0x81c, 0x00000000,
15 0x820, 0x01000100,
16 0x824, 0x00390004,
[all …]

12