Home
last modified time | relevance | path

Searched +full:0 +full:x3100 (Results 1 – 25 of 120) sorted by relevance

12345

/Linux-v5.10/Documentation/networking/device_drivers/ethernet/neterion/
Dvxge.rst4 Neterion's (Formerly S2io) X3100 Series 10GbE PCIe Server Adapter Linux driver
17 This Linux driver supports all Neterion's X3100 series 10 GbE PCIe I/O
20 The X3100 series supports four modes of operation, configurable via
44 - Single Root mode: v1.0 (up to 17 functions)
45 - Multi-Root mode: v1.0 (up to 17 functions)
49 X3100 Series supports MTU up to 9600 bytes, modifiable using
105 Valid range: 0,1 (disabled, enabled respectively)
113 Valid range: 0,1 (disabled, enabled respectively)
115 Default: 0
/Linux-v5.10/arch/powerpc/boot/dts/fsl/
Dpq3-i2c-1.dtsi2 * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
37 #size-cells = <0>;
40 reg = <0x3100 0x100>;
41 interrupts = <43 2 0 0>;
/Linux-v5.10/drivers/mfd/
Dsi476x-prop.c25 for (i = 0; i < size; i++) in si476x_core_element_is_in_array()
38 for (i = 0; i < size; i++) in si476x_core_element_is_in_range()
49 0x0000, in si476x_core_is_valid_property_a10()
50 0x0500, 0x0501, in si476x_core_is_valid_property_a10()
51 0x0600, in si476x_core_is_valid_property_a10()
52 0x0709, 0x070C, 0x070D, 0x70E, 0x710, in si476x_core_is_valid_property_a10()
53 0x0718, in si476x_core_is_valid_property_a10()
54 0x1207, 0x1208, in si476x_core_is_valid_property_a10()
55 0x2007, in si476x_core_is_valid_property_a10()
56 0x2300, in si476x_core_is_valid_property_a10()
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/virtio/
Dmmio.txt31 reg = <0x3000 0x100>;
40 reg = <0x3100 0x100>;
/Linux-v5.10/Documentation/admin-guide/media/
Ddvb-usb-dw2102-cardlist.rst11 :stub-columns: 0
15 * - DVBWorld DVB-C 3101 USB2.0
17 * - DVBWorld DVB-S 2101 USB2.0
18 - 04b4:0x2101
19 * - DVBWorld DVB-S 2102 USB2.0
21 * - DVBWorld DW2104 USB2.0
24 - 0x1FE1:5456
25 * - Geniatech T220 DVB-T/T2 USB2.0
26 - 0x1f4d:0xD220
27 * - SU3000HD DVB-S USB2.0
[all …]
/Linux-v5.10/drivers/staging/media/meson/vdec/
Ddos_regs.h11 #define VDEC_ASSIST_AMR1_INT8 0x00b4
13 #define ASSIST_MBOX1_CLR_REG 0x01d4
14 #define ASSIST_MBOX1_MASK 0x01d8
16 #define MPSR 0x0c04
17 #define MCPU_INTR_MSK 0x0c10
18 #define CPSR 0x0c84
20 #define IMEM_DMA_CTRL 0x0d00
21 #define IMEM_DMA_ADR 0x0d04
22 #define IMEM_DMA_COUNT 0x0d08
23 #define LMEM_DMA_CTRL 0x0d40
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/i2c/
Di2c-mpc.txt28 #size-cells = <0>;
30 reg = <0x1740 0x20>;
31 interrupts = <11 0x8>;
38 reg = <0x1760 0x8>;
44 #size-cells = <0>;
46 reg = <0x3d00 0x40>;
47 interrupts = <2 15 0>;
55 #size-cells = <0>;
57 reg = <0x3100 0x100>;
/Linux-v5.10/arch/arm64/boot/dts/qcom/
Dpm6150.dtsi11 pm6150_lsid0: pmic@0 {
13 reg = <0x0 SPMI_USID>;
15 #size-cells = <0>;
19 reg = <0x800>;
20 mode-bootloader = <0x2>;
21 mode-recovery = <0x1>;
25 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
34 reg = <0x2400>;
35 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
38 #thermal-sensor-cells = <0>;
[all …]
Dpm8150l.dtsi15 polling-delay = <0>;
22 hysteresis = <0>;
28 hysteresis = <0>;
34 hysteresis = <0>;
45 reg = <0x4 SPMI_USID>;
47 #size-cells = <0>;
51 reg = <0x0800>;
58 reg = <0x2400>;
59 interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
62 #thermal-sensor-cells = <0>;
[all …]
Dpm8150b.dtsi15 polling-delay = <0>;
22 hysteresis = <0>;
28 hysteresis = <0>;
34 hysteresis = <0>;
45 reg = <0x2 SPMI_USID>;
47 #size-cells = <0>;
51 reg = <0x0800>;
58 reg = <0x2400>;
59 interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
62 #thermal-sensor-cells = <0>;
[all …]
Dpm8998.dtsi35 pm8998_lsid0: pmic@0 {
37 reg = <0x0 SPMI_USID>;
39 #size-cells = <0>;
44 reg = <0x800>;
45 mode-bootloader = <0x2>;
46 mode-recovery = <0x1>;
50 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
59 reg = <0x2400>;
60 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
63 #thermal-sensor-cells = <0>;
[all …]
Dpm8150.dtsi16 polling-delay = <0>;
23 hysteresis = <0>;
29 hysteresis = <0>;
35 hysteresis = <0>;
44 pm8150_0: pmic@0 {
46 reg = <0x0 SPMI_USID>;
48 #size-cells = <0>;
52 reg = <0x0800>;
55 interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
66 reg = <0x2400>;
[all …]
Dpms405.dtsi34 pms405_0: pms405@0 {
36 reg = <0x0 SPMI_USID>;
38 #size-cells = <0>;
42 reg = <0xc000>;
45 interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
46 <0 0xc1 0 IRQ_TYPE_NONE>,
47 <0 0xc2 0 IRQ_TYPE_NONE>,
48 <0 0xc3 0 IRQ_TYPE_NONE>,
49 <0 0xc4 0 IRQ_TYPE_NONE>,
50 <0 0xc5 0 IRQ_TYPE_NONE>,
[all …]
Dpm8916.dtsi9 pm8916_0: pmic@0 {
11 reg = <0x0 SPMI_USID>;
13 #size-cells = <0>;
17 reg = <0x800>;
18 mode-bootloader = <0x2>;
19 mode-recovery = <0x1>;
23 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
31 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
39 interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
46 reg = <0x2400>;
[all …]
/Linux-v5.10/drivers/net/ethernet/neterion/vxge/
Dvxge-ethtool.h10 * vxge-ethtool.h: Driver for Exar Corp's X3100 Series 10GbE PCIe I/O
41 #define VXGE_FLICKER_OFF 0
/Linux-v5.10/drivers/net/ethernet/intel/ixgbevf/
Dregs.h7 #define IXGBE_VFCTRL 0x00000
8 #define IXGBE_VFSTATUS 0x00008
9 #define IXGBE_VFLINKS 0x00010
10 #define IXGBE_VFFRTIMER 0x00048
11 #define IXGBE_VFRXMEMWRAP 0x03190
12 #define IXGBE_VTEICR 0x00100
13 #define IXGBE_VTEICS 0x00104
14 #define IXGBE_VTEIMS 0x00108
15 #define IXGBE_VTEIMC 0x0010C
16 #define IXGBE_VTEIAC 0x00110
[all …]
/Linux-v5.10/arch/arm/boot/dts/
Dqcom-pma8084.dtsi8 pma8084_0: pma8084@0 {
10 reg = <0x0 SPMI_USID>;
12 #size-cells = <0>;
16 reg = <0x6000>,
17 <0x6100>;
19 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
24 reg = <0x800>;
25 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
32 reg = <0xc000>;
34 gpio-ranges = <&pma8084_gpios 0 0 22>;
[all …]
/Linux-v5.10/drivers/gpu/drm/msm/adreno/
Da4xx_gpu.c31 for (i = 0; i < submit->nr_cmds; i++) { in a4xx_submit()
62 OUT_RING(ring, 0x00000000); in a4xx_submit()
81 for (i = 0; i < 4; i++) in a4xx_enable_hwcg()
82 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_CTL_TP(i), 0x02222202); in a4xx_enable_hwcg()
83 for (i = 0; i < 4; i++) in a4xx_enable_hwcg()
84 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_CTL2_TP(i), 0x00002222); in a4xx_enable_hwcg()
85 for (i = 0; i < 4; i++) in a4xx_enable_hwcg()
86 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_HYST_TP(i), 0x0E739CE7); in a4xx_enable_hwcg()
87 for (i = 0; i < 4; i++) in a4xx_enable_hwcg()
88 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_DELAY_TP(i), 0x00111111); in a4xx_enable_hwcg()
[all …]
/Linux-v5.10/sound/soc/codecs/
Drt700.h33 #define RT700_AUDIO_FUNCTION_GROUP 0x01
34 #define RT700_DAC_OUT1 0x02
35 #define RT700_DAC_OUT2 0x03
36 #define RT700_ADC_IN1 0x09
37 #define RT700_ADC_IN2 0x08
38 #define RT700_DMIC1 0x12
39 #define RT700_DMIC2 0x13
40 #define RT700_SPK_OUT 0x14
41 #define RT700_MIC2 0x19
42 #define RT700_LINE1 0x1a
[all …]
Drt715.h32 #define RT715_AUDIO_FUNCTION_GROUP 0x01
33 #define RT715_MIC_ADC 0x07
34 #define RT715_LINE_ADC 0x08
35 #define RT715_MIX_ADC 0x09
36 #define RT715_DMIC1 0x12
37 #define RT715_DMIC2 0x13
38 #define RT715_MIC1 0x18
39 #define RT715_MIC2 0x19
40 #define RT715_LINE1 0x1a
41 #define RT715_LINE2 0x1b
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/phy/
Dphy-mtk-xsphy.txt59 u2 port0 0x0000 MISC
60 0x0100 FMREG
61 0x0300 U2PHY_COM
62 u2 port1 0x1000 MISC
63 0x1100 FMREG
64 0x1300 U2PHY_COM
65 u2 port2 0x2000 MISC
67 u31 common 0x3000 DIG_GLB
68 0x3100 PHYA_GLB
69 u31 port0 0x3400 DIG_LN_TOP
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/net/dsa/
Dlantiq-gswip.txt46 #size-cells = <0>;
48 reg = < 0xe108000 0x3100 /* switch */
49 0xe10b100 0xd8 /* mdio */
50 0xe10b1d8 0x130 /* mii */
52 dsa,member = <0 0>;
56 #size-cells = <0>;
58 port@0 {
59 reg = <0>;
94 reg = <0x6>;
102 #size-cells = <0>;
[all …]
/Linux-v5.10/drivers/soc/fsl/qbman/
Dbman.c40 #define BM_REG_RCR_PI_CINH 0x3000
41 #define BM_REG_RCR_CI_CINH 0x3100
42 #define BM_REG_RCR_ITR 0x3200
43 #define BM_REG_CFG 0x3300
44 #define BM_REG_SCN(n) (0x3400 + ((n) << 6))
45 #define BM_REG_ISR 0x3e00
46 #define BM_REG_IER 0x3e40
47 #define BM_REG_ISDR 0x3e80
48 #define BM_REG_IIR 0x3ec0
51 #define BM_CL_CR 0x0000
[all …]
/Linux-v5.10/drivers/regulator/
Dslg51000-regulator.h14 #define SLG51000_SYSCTL_PATN_ID_B0 0x1105
15 #define SLG51000_SYSCTL_PATN_ID_B1 0x1106
16 #define SLG51000_SYSCTL_PATN_ID_B2 0x1107
17 #define SLG51000_SYSCTL_SYS_CONF_A 0x1109
18 #define SLG51000_SYSCTL_SYS_CONF_D 0x110c
19 #define SLG51000_SYSCTL_MATRIX_CONF_A 0x110d
20 #define SLG51000_SYSCTL_MATRIX_CONF_B 0x110e
21 #define SLG51000_SYSCTL_REFGEN_CONF_C 0x1111
22 #define SLG51000_SYSCTL_UVLO_CONF_A 0x1112
23 #define SLG51000_SYSCTL_FAULT_LOG1 0x1115
[all …]
/Linux-v5.10/drivers/gpu/drm/rockchip/
Drk3066_hdmi.h10 #define GRF_SOC_CON0 0x150
13 #define DDC_SEGMENT_ADDR 0x30
15 #define HDMI_MAXIMUM_INFO_FRAME_SIZE 0x11
17 #define N_32K 0x1000
18 #define N_441K 0x1880
19 #define N_882K 0x3100
20 #define N_1764K 0x6200
21 #define N_48K 0x1800
22 #define N_96K 0x3000
23 #define N_192K 0x6000
[all …]

12345