Home
last modified time | relevance | path

Searched +full:0 +full:x1280 (Results 1 – 25 of 44) sorted by relevance

12

/Linux-v6.1/drivers/firmware/efi/
Dsysfb_efi.c30 OVERRIDE_NONE = 0x0,
31 OVERRIDE_BASE = 0x1,
32 OVERRIDE_STRIDE = 0x2,
33 OVERRIDE_HEIGHT = 0x4,
34 OVERRIDE_WIDTH = 0x8,
38 [M_I17] = { "i17", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
39 [M_I20] = { "i20", 0x80010000, 1728 * 4, 1680, 1050, OVERRIDE_NONE }, /* guess */
40 [M_I20_SR] = { "imac7", 0x40010000, 1728 * 4, 1680, 1050, OVERRIDE_NONE },
41 [M_I24] = { "i24", 0x80010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE }, /* guess */
42 [M_I24_8_1] = { "imac8", 0xc0060000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
[all …]
/Linux-v6.1/Documentation/devicetree/bindings/display/panel/
Dleadtek,ltk500hd1829.yaml7 title: Leadtek LTK500HD1829 5.0in 720x1280 DSI panel
39 #size-cells = <0>;
41 panel@0 {
43 reg = <0>;
Dxinpeng,xpp055c272.yaml7 title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel
39 #size-cells = <0>;
41 panel@0 {
43 reg = <0>;
Dleadtek,ltk050h3146w.yaml7 title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
41 #size-cells = <0>;
42 panel@0 {
44 reg = <0>;
Draydium,rm68200.yaml13 The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
47 #size-cells = <0>;
48 panel@0 {
50 reg = <0>;
51 reset-gpios = <&gpiof 15 0>;
/Linux-v6.1/include/linux/soc/samsung/
Dexynos-regs-pmu.h17 #define S5P_CENTRAL_SEQ_CONFIGURATION 0x0200
21 #define S5P_CENTRAL_SEQ_OPTION 0x0208
42 #define EXYNOS_SWRESET 0x0400
44 #define S5P_WAKEUP_STAT 0x0600
46 #define EXYNOS_EINT_WAKEUP_MASK_DISABLED 0xffffffff
47 #define EXYNOS_EINT_WAKEUP_MASK 0x0604
48 #define S5P_WAKEUP_MASK 0x0608
49 #define S5P_WAKEUP_MASK2 0x0614
52 #define EXYNOS4_MIPI_PHY_CONTROL(n) (0x0710 + (n) * 4)
54 #define EXYNOS4_PHY_ENABLE (1 << 0)
[all …]
/Linux-v6.1/include/uapi/linux/
Dcycx_cfm.h28 #define CFM_IMAGE_SIZE 0x20000 /* max size of CYCX code image file */
31 #define CFM_LOAD_BUFSZ 0x400 /* buffer size for reset code (buffer_load) */
34 #define GEN_POWER_ON 0x1280
36 #define GEN_SET_SEG 0x1401 /* boot segment setting. */
37 #define GEN_BOOT_DAT 0x1402 /* boot data. */
38 #define GEN_START 0x1403 /* board start. */
39 #define GEN_DEFPAR 0x1404 /* buffer length for boot. */
/Linux-v6.1/sound/soc/mediatek/mt2701/
Dmt2701-reg.h12 #define AUDIO_TOP_CON0 0x0000
13 #define AUDIO_TOP_CON4 0x0010
14 #define AUDIO_TOP_CON5 0x0014
15 #define AFE_DAIBT_CON0 0x001c
16 #define AFE_MRGIF_CON 0x003c
17 #define ASMI_TIMING_CON1 0x0100
18 #define ASMO_TIMING_CON1 0x0104
19 #define PWR1_ASM_CON1 0x0108
20 #define ASYS_TOP_CON 0x0600
21 #define ASYS_I2SIN1_CON 0x0604
[all …]
/Linux-v6.1/drivers/irqchip/
Dirq-clps711x.c19 #define CLPS711X_INTSR1 (0x0240)
20 #define CLPS711X_INTMR1 (0x0280)
21 #define CLPS711X_BLEOI (0x0600)
22 #define CLPS711X_MCEOI (0x0640)
23 #define CLPS711X_TEOI (0x0680)
24 #define CLPS711X_TC1EOI (0x06c0)
25 #define CLPS711X_TC2EOI (0x0700)
26 #define CLPS711X_RTCEOI (0x0740)
27 #define CLPS711X_UMSEOI (0x0780)
28 #define CLPS711X_COEOI (0x07c0)
[all …]
/Linux-v6.1/drivers/net/ethernet/cavium/thunder/
Dnic_reg.h13 #define NIC_PF_CFG (0x0000)
14 #define NIC_PF_STATUS (0x0010)
15 #define NIC_PF_INTR_TIMER_CFG (0x0030)
16 #define NIC_PF_BIST_STATUS (0x0040)
17 #define NIC_PF_SOFT_RESET (0x0050)
18 #define NIC_PF_TCP_TIMER (0x0060)
19 #define NIC_PF_BP_CFG (0x0080)
20 #define NIC_PF_RRM_CFG (0x0088)
21 #define NIC_PF_CQM_CFG (0x00A0)
22 #define NIC_PF_CNM_CF (0x00A8)
[all …]
/Linux-v6.1/drivers/video/backlight/
Dotm3225a.c22 #define OTM3225A_INDEX_REG 0x70
23 #define OTM3225A_DATA_REG 0x72
26 #define DRIVER_OUTPUT_CTRL_1 0x01
27 #define DRIVER_WAVEFORM_CTRL 0x02
28 #define ENTRY_MODE 0x03
29 #define SCALING_CTRL 0x04
30 #define DISPLAY_CTRL_1 0x07
31 #define DISPLAY_CTRL_2 0x08
32 #define DISPLAY_CTRL_3 0x09
33 #define FRAME_CYCLE_CTRL 0x0A
[all …]
/Linux-v6.1/Documentation/devicetree/bindings/remoteproc/
Dqcom,q6v5.txt219 reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
223 <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
243 qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
245 qcom,smem-states = <&modem_smp2p_out 0>;
260 qcom,smd-edge = <0>;
/Linux-v6.1/arch/s390/include/asm/
Dlowcore.h25 __u8 pad_0x0000[0x0014-0x0000]; /* 0x0000 */
26 __u32 ipl_parmblock_ptr; /* 0x0014 */
27 __u8 pad_0x0018[0x0080-0x0018]; /* 0x0018 */
28 __u32 ext_params; /* 0x0080 */
31 __u16 ext_cpu_addr; /* 0x0084 */
32 __u16 ext_int_code; /* 0x0086 */
36 __u32 svc_int_code; /* 0x0088 */
39 __u16 pgm_ilc; /* 0x008c */
40 __u16 pgm_code; /* 0x008e */
44 __u32 data_exc_code; /* 0x0090 */
[all …]
/Linux-v6.1/drivers/media/pci/cx25821/
Dcx25821-medusa-reg.h13 #define HOST_REGISTER1 0x0000
14 #define HOST_REGISTER2 0x0001
17 #define CHIP_CTRL 0x0100
18 #define AFE_AB_CTRL 0x0104
19 #define AFE_CD_CTRL 0x0108
20 #define AFE_EF_CTRL 0x010C
21 #define AFE_GH_CTRL 0x0110
22 #define DENC_AB_CTRL 0x0114
23 #define BYP_AB_CTRL 0x0118
24 #define MON_A_CTRL 0x011C
[all …]
/Linux-v6.1/Documentation/devicetree/bindings/sound/
Drenesas,rsnd.yaml69 it must be 0 if your system is using single DAI
71 enum: [0, 1]
75 it must be 0 if your system has audio_clkout
77 enum: [0, 1]
108 - pattern: '^ssi\.[0-9]$'
109 - pattern: '^src\.[0-9]$'
110 - pattern: '^mix\.[0-1]$'
111 - pattern: '^ctu\.[0-1]$'
112 - pattern: '^dvc\.[0-1]$'
118 port(@[0-9a-f]+)?:
[all …]
/Linux-v6.1/drivers/clk/imx/
Dclk-imx93.c56 { IMX93_CLK_A55_PERIPH, "a55_periph_root", 0x0000, FAST_SEL, CLK_IS_CRITICAL },
57 { IMX93_CLK_A55_MTR_BUS, "a55_mtr_bus_root", 0x0080, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
58 { IMX93_CLK_A55, "a55_root", 0x0100, FAST_SEL, CLK_IS_CRITICAL },
59 { IMX93_CLK_M33, "m33_root", 0x0180, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
60 { IMX93_CLK_BUS_WAKEUP, "bus_wakeup_root", 0x0280, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
61 { IMX93_CLK_BUS_AON, "bus_aon_root", 0x0300, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
62 { IMX93_CLK_WAKEUP_AXI, "wakeup_axi_root", 0x0380, FAST_SEL, CLK_IS_CRITICAL },
63 { IMX93_CLK_SWO_TRACE, "swo_trace_root", 0x0400, LOW_SPEED_IO_SEL, },
64 { IMX93_CLK_M33_SYSTICK, "m33_systick_root", 0x0480, LOW_SPEED_IO_SEL, },
65 { IMX93_CLK_FLEXIO1, "flexio1_root", 0x0500, LOW_SPEED_IO_SEL, },
[all …]
/Linux-v6.1/drivers/net/wireless/realtek/rtw89/
Dpci.h10 #define MDIO_PG0_G1 0
14 #define RAC_CTRL_PPR 0x00
15 #define RAC_ANA0A 0x0A
17 #define RAC_ANA0C 0x0C
19 #define RAC_ANA10 0x10
21 #define RAC_REG_REV2 0x1B
23 #define PCIE_DPHY_DLY_25US 0x1
24 #define RAC_ANA19 0x19
26 #define RAC_REG_FLD_0 0x1D
28 #define PCIE_AUTOK_4 0x3
[all …]
/Linux-v6.1/include/linux/
Dpci_ids.h15 #define PCI_CLASS_NOT_DEFINED 0x0000
16 #define PCI_CLASS_NOT_DEFINED_VGA 0x0001
18 #define PCI_BASE_CLASS_STORAGE 0x01
19 #define PCI_CLASS_STORAGE_SCSI 0x0100
20 #define PCI_CLASS_STORAGE_IDE 0x0101
21 #define PCI_CLASS_STORAGE_FLOPPY 0x0102
22 #define PCI_CLASS_STORAGE_IPI 0x0103
23 #define PCI_CLASS_STORAGE_RAID 0x0104
24 #define PCI_CLASS_STORAGE_SATA 0x0106
25 #define PCI_CLASS_STORAGE_SATA_AHCI 0x010601
[all …]
/Linux-v6.1/drivers/net/ethernet/microchip/
Dlan743x_main.h15 #define ID_REV (0x00)
16 #define ID_REV_ID_MASK_ (0xFFFF0000)
17 #define ID_REV_ID_LAN7430_ (0x74300000)
18 #define ID_REV_ID_LAN7431_ (0x74310000)
19 #define ID_REV_ID_LAN743X_ (0x74300000)
20 #define ID_REV_ID_A011_ (0xA0110000) // PCI11010
21 #define ID_REV_ID_A041_ (0xA0410000) // PCI11414
22 #define ID_REV_ID_A0X1_ (0xA0010000)
24 ((((id_rev) & 0xFFF00000) == ID_REV_ID_LAN743X_) || \
25 (((id_rev) & 0xFF0F0000) == ID_REV_ID_A0X1_))
[all …]
/Linux-v6.1/drivers/net/ethernet/marvell/octeontx2/af/
Drvu_reg.h12 #define RVU_AF_MSIXTR_BASE (0x10)
13 #define RVU_AF_ECO (0x20)
14 #define RVU_AF_BLK_RST (0x30)
15 #define RVU_AF_PF_BAR4_ADDR (0x40)
16 #define RVU_AF_RAS (0x100)
17 #define RVU_AF_RAS_W1S (0x108)
18 #define RVU_AF_RAS_ENA_W1S (0x110)
19 #define RVU_AF_RAS_ENA_W1C (0x118)
20 #define RVU_AF_GEN_INT (0x120)
21 #define RVU_AF_GEN_INT_W1S (0x128)
[all …]
/Linux-v6.1/drivers/net/fddi/
Ddefxx.h70 #define PI_ALIGN_K_XMT_DATA_BUFF 0 /* Xmt data que buffer alignment */
75 #define PI_PHY_K_S 0 /* Index to S phy */
76 #define PI_PHY_K_A 0 /* Index to A phy */
95 #define PI_FMC_DESCR_V_LEN 0
97 #define PI_FMC_DESCR_M_SOP 0x80000000
98 #define PI_FMC_DESCR_M_EOP 0x40000000
99 #define PI_FMC_DESCR_M_FSC 0x38000000
100 #define PI_FMC_DESCR_M_FSB_ERROR 0x04000000
101 #define PI_FMC_DESCR_M_FSB_ADDR_RECOG 0x02000000
102 #define PI_FMC_DESCR_M_FSB_ADDR_COPIED 0x01000000
[all …]
/Linux-v6.1/drivers/atm/
Dhe.c50 group 0 is used for all traffic
51 interrupt queue 0 is used for all interrupts
93 #define HPRINTK(fmt,args...) do { } while (0)
126 CLK_HIGH, /* 0 */
128 CLK_HIGH, /* 0 */
130 CLK_HIGH, /* 0 */
132 CLK_HIGH, /* 0 */
134 CLK_HIGH, /* 0 */
136 CLK_HIGH, /* 0 */
176 #define he_writel(dev, val, reg) do { writel(val, (dev)->membase + (reg)); wmb(); } while (0)
[all …]
/Linux-v6.1/drivers/firmware/
Dti_sci.h16 #define TI_SCI_MSG_ENABLE_WDT 0x0000
17 #define TI_SCI_MSG_WAKE_RESET 0x0001
18 #define TI_SCI_MSG_VERSION 0x0002
19 #define TI_SCI_MSG_WAKE_REASON 0x0003
20 #define TI_SCI_MSG_GOODBYE 0x0004
21 #define TI_SCI_MSG_SYS_RESET 0x0005
24 #define TI_SCI_MSG_SET_DEVICE_STATE 0x0200
25 #define TI_SCI_MSG_GET_DEVICE_STATE 0x0201
26 #define TI_SCI_MSG_SET_DEVICE_RESETS 0x0202
29 #define TI_SCI_MSG_SET_CLOCK_STATE 0x0100
[all …]
/Linux-v6.1/arch/arm/boot/dts/
Dqcom-msm8974.dtsi20 #clock-cells = <0>;
26 #clock-cells = <0>;
33 #size-cells = <0>;
34 interrupts = <GIC_PPI 9 0xf04>;
36 CPU0: cpu@0 {
40 reg = <0>;
107 reg = <0x0 0x0>;
112 interrupts = <GIC_PPI 7 0xf04>;
121 reg = <0x08000000 0x5100000>;
126 reg = <0x0d100000 0x100000>;
[all …]
/Linux-v6.1/drivers/gpu/drm/amd/include/asic_reg/dpcs/
Ddpcs_3_1_4_offset.h31 // base address: 0x0
32 …DPCSSYS_CR0_SUP_DIG_IDCODE_LO 0x0000
33 …DPCSSYS_CR0_SUP_DIG_IDCODE_HI 0x0001
34 …DPCSSYS_CR0_SUP_DIG_REFCLK_OVRD_IN 0x0002
35 …DPCSSYS_CR0_SUP_DIG_MPLLA_DIV_CLK_OVRD_IN 0x0003
36 …DPCSSYS_CR0_SUP_DIG_MPLLA_HDMI_CLK_OVRD_IN 0x0004
37 …DPCSSYS_CR0_SUP_DIG_MPLLB_DIV_CLK_OVRD_IN 0x0005
38 …DPCSSYS_CR0_SUP_DIG_MPLLB_HDMI_CLK_OVRD_IN 0x0006
39 …DPCSSYS_CR0_SUP_DIG_MPLLA_OVRD_IN_0 0x0007
40 …DPCSSYS_CR0_SUP_DIG_MPLLA_OVRD_IN_1 0x0008
[all …]

12