/Linux-v6.1/sound/soc/sh/rcar/ |
D | gen.c | 52 RSND_REG_SET(id, offset, 0, #id) 68 return 0; in rsnd_is_accessible_reg() 90 return 0; in rsnd_mod_read() 173 memset(®c, 0, sizeof(regc)); in _rsnd_gen_regmap_init() 198 for (i = 0; i < conf_size; i++) { in _rsnd_gen_regmap_init() 202 regf.lsb = 0; in _rsnd_gen_regmap_init() 215 return 0; in _rsnd_gen_regmap_init() 224 RSND_GEN_S_REG(SSI_MODE0, 0x800), in rsnd_gen2_probe() 225 RSND_GEN_S_REG(SSI_MODE1, 0x804), in rsnd_gen2_probe() 226 RSND_GEN_S_REG(SSI_MODE2, 0x808), in rsnd_gen2_probe() [all …]
|
/Linux-v6.1/drivers/gpu/drm/radeon/ |
D | rv770.c | 56 unsigned fb_div = 0, vclk_div = 0, dclk_div = 0; in rv770_set_uvd_clocks() 71 return 0; in rv770_set_uvd_clocks() 75 43663, 0x03FFFFFE, 1, 30, ~0, in rv770_set_uvd_clocks() 84 /* set UPLL_FB_DIV to 0x50000 */ in rv770_set_uvd_clocks() 85 WREG32_P(CG_UPLL_FUNC_CNTL_3, UPLL_FB_DIV(0x50000), ~UPLL_FB_DIV_MASK); in rv770_set_uvd_clocks() 88 WREG32_P(CG_UPLL_FUNC_CNTL, 0, ~(UPLL_RESET_MASK | UPLL_SLEEP_MASK)); in rv770_set_uvd_clocks() 90 /* assert BYPASS EN and FB_DIV[0] <- ??? why? */ in rv770_set_uvd_clocks() 117 WREG32_P(CG_UPLL_FUNC_CNTL, 0, ~UPLL_RESET_MASK); in rv770_set_uvd_clocks() 121 /* deassert BYPASS EN and FB_DIV[0] <- ??? why? */ in rv770_set_uvd_clocks() 122 WREG32_P(CG_UPLL_FUNC_CNTL, 0, ~UPLL_BYPASS_EN_MASK); in rv770_set_uvd_clocks() [all …]
|
/Linux-v6.1/drivers/gpu/drm/msm/adreno/ |
D | a6xx_gpu_state.h | 13 0x8000, 0x8006, 0x8010, 0x8092, 0x8094, 0x809d, 0x80a0, 0x80a6, 14 0x80af, 0x80f1, 0x8100, 0x8107, 0x8109, 0x8109, 0x8110, 0x8110, 15 0x8400, 0x840b, 19 0x8800, 0x8806, 0x8809, 0x8811, 0x8818, 0x881e, 0x8820, 0x8865, 20 0x8870, 0x8879, 0x8880, 0x8889, 0x8890, 0x8891, 0x8898, 0x8898, 21 0x88c0, 0x88c1, 0x88d0, 0x88e3, 0x8900, 0x890c, 0x890f, 0x891a, 22 0x8c00, 0x8c01, 0x8c08, 0x8c10, 0x8c17, 0x8c1f, 0x8c26, 0x8c33, 26 0x88f0, 0x88f3, 0x890d, 0x890e, 0x8927, 0x8928, 0x8bf0, 0x8bf1, 27 0x8c02, 0x8c07, 0x8c11, 0x8c16, 0x8c20, 0x8c25, 31 0x9200, 0x9216, 0x9218, 0x9236, 0x9300, 0x9306, [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/net/ |
D | mscc,vsc7514-switch.yaml | 23 pattern: "^switch@[0-9a-f]+$" 97 const: 0 102 "^port@[0-9a-f]+$": 146 reg = <0x1010000 0x10000>, 147 <0x1030000 0x10000>, 148 <0x1080000 0x100>, 149 <0x10e0000 0x10000>, 150 <0x11e0000 0x100>, 151 <0x11f0000 0x100>, 152 <0x1200000 0x100>, [all …]
|
/Linux-v6.1/drivers/net/ethernet/intel/igbvf/ |
D | regs.h | 7 #define E1000_CTRL 0x00000 /* Device Control - RW */ 8 #define E1000_STATUS 0x00008 /* Device Status - RO */ 9 #define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ 10 #define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ 11 #define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) 12 #define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ 13 #define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ 14 #define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ 15 #define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ 16 #define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ [all …]
|
/Linux-v6.1/arch/powerpc/boot/dts/ |
D | mpc5121.dtsi | 26 #size-cells = <0>; 28 PowerPC,5121@0 { 30 reg = <0>; 31 d-cache-line-size = <0x20>; /* 32 bytes */ 32 i-cache-line-size = <0x20>; /* 32 bytes */ 33 d-cache-size = <0x8000>; /* L1, 32K */ 34 i-cache-size = <0x8000>; /* L1, 32K */ 43 reg = <0x00000000 0x10000000>; /* 256MB at 0 */ 48 reg = <0x20000000 0x4000>; 49 interrupts = <66 0x8>; [all …]
|
/Linux-v6.1/arch/mips/boot/dts/mscc/ |
D | ocelot.dtsi | 11 #size-cells = <0>; 13 cpu@0 { 17 reg = <0>; 26 #address-cells = <0>; 34 #clock-cells = <0>; 40 #clock-cells = <0>; 50 ranges = <0 0x70000000 0x2000000>; 54 cpu_ctrl: syscon@0 { 56 reg = <0x0 0x2c>; 61 reg = <0x70 0x70>; [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/remoteproc/ |
D | ti,pru-rproc.yaml | 19 The K3 SoCs containing ICSSG v1.0 (eg: AM65x SR1.0) also have two Auxiliary 21 containing the revised ICSSG v1.1 (eg: J721E, AM65x SR2.0) have an extra two 46 - ti,am654-tx-pru # for Tx_PRUs in K3 AM65x SR2.0 SoCs 79 pattern: "^rtu@[0-9a-f]+$" 91 pattern: "^txpru@[0-9a-f]+" 95 pattern: "^pru@[0-9a-f]+$" 108 pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */ 112 ranges = <0x0 0x300000 0x80000>; 114 pruss: pruss@0 { 116 reg = <0x0 0x80000>; [all …]
|
/Linux-v6.1/arch/mips/include/asm/mach-ralink/ |
D | rt3883.h | 13 #define RT3883_SDRAM_BASE 0x00000000 14 #define RT3883_SYSC_BASE 0x10000000 15 #define RT3883_TIMER_BASE 0x10000100 16 #define RT3883_INTC_BASE 0x10000200 17 #define RT3883_MEMC_BASE 0x10000300 18 #define RT3883_UART0_BASE 0x10000500 19 #define RT3883_PIO_BASE 0x10000600 20 #define RT3883_FSCC_BASE 0x10000700 21 #define RT3883_NANDC_BASE 0x10000810 22 #define RT3883_I2C_BASE 0x10000900 [all …]
|
/Linux-v6.1/arch/arm/boot/dts/ |
D | exynos5.dtsi | 40 reg = <0x10000000 0x100>; 45 reg = <0x12250000 0x14>; 53 reg = <0x10440000 0x1000>; 54 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, 92 reg = <0x10481000 0x1000>, 93 <0x10482000 0x2000>, 94 <0x10484000 0x2000>, 95 <0x10486000 0x2000>; 102 reg = <0x10050000 0x5000>; 107 reg = <0x12C00000 0x100>; [all …]
|
D | exynos4.dtsi | 68 reg = <0x03810000 0x0C>; 79 reg = <0x03830000 0x100>; 88 samsung,idma-addr = <0x03000000>; 95 reg = <0x10000000 0x100>; 100 reg = <0x10500000 0x2000>; 105 reg = <0x12570000 0x14>; 116 reg = <0x10023C40 0x20>; 117 #power-domain-cells = <0>; 123 reg = <0x10023C60 0x20>; 124 #power-domain-cells = <0>; [all …]
|
/Linux-v6.1/arch/arm64/boot/dts/ti/ |
D | k3-am65-main.dtsi | 12 reg = <0x0 0x70000000 0x0 0x200000>; 15 ranges = <0x0 0x0 0x70000000 0x200000>; 17 atf-sram@0 { 18 reg = <0x0 0x20000>; 22 reg = <0xf0000 0x10000>; 26 reg = <0x100000 0x100000>; 37 reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ 38 <0x00 0x01880000 0x00 0x90000>, /* GICR */ 39 <0x00 0x6f000000 0x00 0x2000>, /* GICC */ 40 <0x00 0x6f010000 0x00 0x1000>, /* GICH */ [all …]
|
D | k3-am64-main.dtsi | 13 #clock-cells = <0>; 15 clock-frequency = <0>; 22 reg = <0x00 0x70000000 0x00 0x200000>; 25 ranges = <0x0 0x00 0x70000000 0x200000>; 28 reg = <0x1c0000 0x20000>; 32 reg = <0x1e0000 0x1c000>; 36 reg = <0x1fc000 0x4000>; 42 reg = <0x0 0x43000000 0x0 0x20000>; 45 ranges = <0x0 0x0 0x43000000 0x20000>; 50 mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */ [all …]
|
/Linux-v6.1/sound/soc/codecs/ |
D | wm8770.c | 37 { 0, 0x7f }, 38 { 1, 0x7f }, 39 { 2, 0x7f }, 40 { 3, 0x7f }, 41 { 4, 0x7f }, 42 { 5, 0x7f }, 43 { 6, 0x7f }, 44 { 7, 0x7f }, 45 { 8, 0x7f }, 46 { 9, 0xff }, [all …]
|
/Linux-v6.1/sound/pci/oxygen/ |
D | wm8776.h | 14 #define WM8776_HPLVOL 0x00 15 #define WM8776_HPRVOL 0x01 16 #define WM8776_HPMASTER 0x02 17 #define WM8776_DACLVOL 0x03 18 #define WM8776_DACRVOL 0x04 19 #define WM8776_DACMASTER 0x05 20 #define WM8776_PHASESWAP 0x06 21 #define WM8776_DACCTRL1 0x07 22 #define WM8776_DACMUTE 0x08 23 #define WM8776_DACCTRL2 0x09 [all …]
|
/Linux-v6.1/arch/arm64/boot/dts/intel/ |
D | socfpga_agilex.dtsi | 22 service_reserved: svcbuffer@0 { 24 reg = <0x0 0x0 0x0 0x2000000>; 25 alignment = <0x1000>; 32 #size-cells = <0>; 34 cpu0: cpu@0 { 38 reg = <0x0>; 45 reg = <0x1>; 52 reg = <0x2>; 59 reg = <0x3>; 85 reg = <0x0 0xfffc1000 0x0 0x1000>, [all …]
|
/Linux-v6.1/drivers/gpu/drm/amd/include/asic_reg/dce/ |
D | dce_8_0_sh_mask.h | 27 #define PIPE0_PG_CONFIG__PIPE0_POWER_FORCEON_MASK 0x1 28 #define PIPE0_PG_CONFIG__PIPE0_POWER_FORCEON__SHIFT 0x0 29 #define PIPE0_PG_ENABLE__PIPE0_POWER_GATE_MASK 0x1 30 #define PIPE0_PG_ENABLE__PIPE0_POWER_GATE__SHIFT 0x0 31 #define PIPE0_PG_STATUS__PIPE0_PGFSM_READ_DATA_MASK 0xffffff 32 #define PIPE0_PG_STATUS__PIPE0_PGFSM_READ_DATA__SHIFT 0x0 33 #define PIPE0_PG_STATUS__PIPE0_DEBUG_PWR_STATUS_MASK 0x3000000 34 #define PIPE0_PG_STATUS__PIPE0_DEBUG_PWR_STATUS__SHIFT 0x18 35 #define PIPE0_PG_STATUS__PIPE0_DESIRED_PWR_STATE_MASK 0x10000000 36 #define PIPE0_PG_STATUS__PIPE0_DESIRED_PWR_STATE__SHIFT 0x1c [all …]
|
D | dce_11_0_sh_mask.h | 27 #define PIPE0_PG_CONFIG__PIPE0_POWER_FORCEON_MASK 0x1 28 #define PIPE0_PG_CONFIG__PIPE0_POWER_FORCEON__SHIFT 0x0 29 #define PIPE0_PG_ENABLE__PIPE0_POWER_GATE_MASK 0x1 30 #define PIPE0_PG_ENABLE__PIPE0_POWER_GATE__SHIFT 0x0 31 #define PIPE0_PG_STATUS__PIPE0_PGFSM_READ_DATA_MASK 0xffffff 32 #define PIPE0_PG_STATUS__PIPE0_PGFSM_READ_DATA__SHIFT 0x0 33 #define PIPE0_PG_STATUS__PIPE0_DEBUG_PWR_STATUS_MASK 0x3000000 34 #define PIPE0_PG_STATUS__PIPE0_DEBUG_PWR_STATUS__SHIFT 0x18 35 #define PIPE0_PG_STATUS__PIPE0_DESIRED_PWR_STATE_MASK 0x10000000 36 #define PIPE0_PG_STATUS__PIPE0_DESIRED_PWR_STATE__SHIFT 0x1c [all …]
|
D | dce_11_2_sh_mask.h | 27 #define PIPE0_PG_CONFIG__PIPE0_POWER_FORCEON_MASK 0x1 28 #define PIPE0_PG_CONFIG__PIPE0_POWER_FORCEON__SHIFT 0x0 29 #define PIPE0_PG_ENABLE__PIPE0_POWER_GATE_MASK 0x1 30 #define PIPE0_PG_ENABLE__PIPE0_POWER_GATE__SHIFT 0x0 31 #define PIPE0_PG_STATUS__PIPE0_PGFSM_READ_DATA_MASK 0xffffff 32 #define PIPE0_PG_STATUS__PIPE0_PGFSM_READ_DATA__SHIFT 0x0 33 #define PIPE0_PG_STATUS__PIPE0_DEBUG_PWR_STATUS_MASK 0x3000000 34 #define PIPE0_PG_STATUS__PIPE0_DEBUG_PWR_STATUS__SHIFT 0x18 35 #define PIPE0_PG_STATUS__PIPE0_DESIRED_PWR_STATE_MASK 0x10000000 36 #define PIPE0_PG_STATUS__PIPE0_DESIRED_PWR_STATE__SHIFT 0x1c [all …]
|
D | dce_10_0_sh_mask.h | 27 #define PIPE0_PG_CONFIG__PIPE0_POWER_FORCEON_MASK 0x1 28 #define PIPE0_PG_CONFIG__PIPE0_POWER_FORCEON__SHIFT 0x0 29 #define PIPE0_PG_ENABLE__PIPE0_POWER_GATE_MASK 0x1 30 #define PIPE0_PG_ENABLE__PIPE0_POWER_GATE__SHIFT 0x0 31 #define PIPE0_PG_STATUS__PIPE0_PGFSM_READ_DATA_MASK 0xffffff 32 #define PIPE0_PG_STATUS__PIPE0_PGFSM_READ_DATA__SHIFT 0x0 33 #define PIPE0_PG_STATUS__PIPE0_DEBUG_PWR_STATUS_MASK 0x3000000 34 #define PIPE0_PG_STATUS__PIPE0_DEBUG_PWR_STATUS__SHIFT 0x18 35 #define PIPE0_PG_STATUS__PIPE0_DESIRED_PWR_STATE_MASK 0x10000000 36 #define PIPE0_PG_STATUS__PIPE0_DESIRED_PWR_STATE__SHIFT 0x1c [all …]
|
/Linux-v6.1/include/linux/mfd/syscon/ |
D | atmel-matrix.h | 11 #define AT91SAM9260_MATRIX_MCFG 0x00 12 #define AT91SAM9260_MATRIX_SCFG 0x40 13 #define AT91SAM9260_MATRIX_PRS 0x80 14 #define AT91SAM9260_MATRIX_MRCR 0x100 15 #define AT91SAM9260_MATRIX_EBICSA 0x11c 17 #define AT91SAM9261_MATRIX_MRCR 0x0 18 #define AT91SAM9261_MATRIX_SCFG 0x4 19 #define AT91SAM9261_MATRIX_TCR 0x24 20 #define AT91SAM9261_MATRIX_EBICSA 0x30 21 #define AT91SAM9261_MATRIX_USBPUCR 0x34 [all …]
|
/Linux-v6.1/arch/arm64/boot/dts/altera/ |
D | socfpga_stratix10.dtsi | 21 service_reserved: svcbuffer@0 { 23 reg = <0x0 0x0 0x0 0x1000000>; 24 alignment = <0x1000>; 31 #size-cells = <0>; 33 cpu0: cpu@0 { 37 reg = <0x0>; 44 reg = <0x1>; 51 reg = <0x2>; 58 reg = <0x3>; 64 interrupts = <0 170 4>, [all …]
|
/Linux-v6.1/arch/mips/boot/dts/ralink/ |
D | mt7628a.dtsi | 10 #size-cells = <0>; 12 cpu@0 { 15 reg = <0>; 25 #address-cells = <0>; 33 reg = <0x10000000 0x200000>; 34 ranges = <0x0 0x10000000 0x1FFFFF>; 39 sysc: system-controller@0 { 41 reg = <0x0 0x60>; 46 reg = <0x60 0x8>; 48 #size-cells = <0>; [all …]
|
/Linux-v6.1/arch/powerpc/lib/ |
D | test-code-patching.c | 17 return 0; in instr_is_branch_to_addr() 28 } while (0) 39 check(instr_is_branch_iform(ppc_inst(0x48000000))); in test_branch_iform() 41 check(instr_is_branch_iform(ppc_inst(0x4bffffff))); in test_branch_iform() 43 check(!instr_is_branch_iform(ppc_inst(0xcbffffff))); in test_branch_iform() 45 check(!instr_is_branch_iform(ppc_inst(0x7bffffff))); in test_branch_iform() 48 check(instr_is_branch_iform(ppc_inst(0x48000001))); in test_branch_iform() 50 check(instr_is_branch_iform(ppc_inst(0x4bfffffd))); in test_branch_iform() 52 check(instr_is_branch_iform(ppc_inst(0x4bff00fd))); in test_branch_iform() 54 check(!instr_is_branch_iform(ppc_inst(0x7bfffffd))); in test_branch_iform() [all …]
|
/Linux-v6.1/arch/arm/mach-cns3xxx/ |
D | cns3xxx.h | 12 #define CNS3XXX_FLASH_BASE 0x10000000 /* Flash/SRAM Memory Bank 0 */ 15 #define CNS3XXX_DDR2SDRAM_BASE 0x20000000 /* DDR2 SDRAM Memory */ 17 #define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */ 19 #define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */ 21 #define CNS3XXX_PPE_BASE 0x70001000 /* HANT */ 23 #define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */ 25 #define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */ 27 #define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */ 29 #define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */ 31 #define SMC_MEMC_STATUS_OFFSET 0x000 [all …]
|