Lines Matching refs:NAND
1 * Ingenic JZ4780 NAND/BCH
3 This file documents the device tree bindings for NAND flash devices on the
4 JZ4780. NAND devices are connected to the NEMC controller (described in
5 memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
8 Required NAND controller device properties:
10 - reg: For each bank with a NAND chip attached, should specify a bank number,
13 Optional NAND controller device properties:
20 - Individual NAND chips are children of the NAND controller node.
28 - nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default
33 Optional child node of NAND chip nodes:
71 NAND devices. The following is a description of the device properties for a