Searched refs:port (Results 1 – 25 of 121) sorted by relevance
12345
| /Kernel-v11.1.0/portable/ |
| D | CMakeLists.txt | 21 template/port.c>
26 BCC/16BitDOS/Flsh186/port.c>
30 BCC/16BitDOS/PC/port.c>
32 # ARMv7-M port for Texas Instruments Code Composer Studio
34 CCS/ARM_CM3/port.c
37 # ARMv7E-M port for Texas Instruments Code Composer Studio
39 CCS/ARM_CM4F/port.c
42 # ARMv7-R port for Texas Instruments Code Composer Studio
44 CCS/ARM_Cortex-R4/port.c
47 # Texas Instruments MSP430 port for Texas Instruments Code Composer Studio
[all …]
|
| D | readme.txt | 1 Each real time kernel port consists of three files that contain the core kernel
2 components and are common to every port, and one or more files that are
15 For example, if you are interested in the [compiler] port for the [architecture]
16 microcontroller, then the port specific files are contained in
18 only port you are interested in then all the other directories can be
|
| /Kernel-v11.1.0/ |
| D | sbom.spdx | 74 FileName: ./portable/WizC/PIC18/port.c
75 SPDXID: SPDXRef-File-portable-WizC-PIC18-port.c
95 FileName: ./portable/Rowley/MSP430F449/port.c
96 SPDXID: SPDXRef-File-portable-Rowley-MSP430F449-port.c
102 FileName: ./portable/CCS/ARM_CM3/port.c
103 SPDXID: SPDXRef-File-portable-CCS-ARMCM3-port.c
109 FileName: ./portable/CCS/ARM_CM4F/port.c
110 SPDXID: SPDXRef-File-portable-CCS-ARMCM4F-port.c
116 FileName: ./portable/CCS/ARM_Cortex-R4/port.c
117 SPDXID: SPDXRef-File-portable-CCS-ARMCortex-R4-port.c
[all …]
|
| D | History.txt | 5 + Add ARMv7-R port with Memory Protection Unit (MPU) support.
6 + Add Memory Protection Unit (MPU) support to the Cortex-M0 port.
37 + Add 64-bit support to the FreeRTOS Windows Simulator port. We thank @watsk
39 + Add support for 64-bit Microblaze processor to the MicroblazeV9 port. We
42 the MSP430F449 port to make it work with both MSP430 GCC and MSPGCC
47 + Update the POSIX port to pass the FreeRTOS task name to pthread for
49 + Update the POSIX port to ignore the user specified stack memory and only
53 + Update the POSIX port to use a timer thread for tick interrupts instead of
56 + Update ARM_TFM port to support TF-Mv2.0.0 release of trusted-firmware-m.
64 vApplicationGetTimerTaskMemory() in the RP2040 port. We thank @dpslwk for
[all …]
|
| /Kernel-v11.1.0/portable/GCC/ARM_CA53_64_BIT/ |
| D | README.md | 1 # ARM_CA53_64_BIT port
3 Initial port to support Armv8-A architecture in FreeRTOS kernel was written for
9 This port is generic and can be used as a starting point for other Armv8-A
10 application processors. Therefore, the port `ARM_CA53_64_BIT` is renamed as
11 `ARM_AARCH64`. The existing projects that use old port `ARM_CA53_64_BIT`,
12 should migrate to renamed port `ARM_AARCH64`.
16 This port uses memory mapped interface to access Arm GIC registers.
|
| /Kernel-v11.1.0/portable/GCC/ARM_CA53_64_BIT_SRE/ |
| D | README.md | 1 # ARM_CA53_64_BIT_SRE port
3 Initial port to support Armv8-A architecture in FreeRTOS kernel was written for
9 This port is generic and can be used as a starting point for other Armv8-A
10 application processors. Therefore, the port `ARM_AARCH64_SRE` is renamed as
11 `ARM_AARCH64_SRE`. The existing projects that use old port `ARM_AARCH64_SRE`,
12 should migrate to renamed port `ARM_AARCH64_SRE`.
16 This port uses System Register interface to access Arm GIC registers.
|
| /Kernel-v11.1.0/portable/ThirdParty/ |
| D | README.md | 12 FreeRTOS team supported third party FreeRTOS port:
20 A new FreeRTOS port cannot be directly contributed to this location. Instead,
22 community supported FreeRTOS port based on the community interest.
29 supported FreeRTOS port:
36 A new FreeRTOS port can be directly contributed by a partner. The process to
37 contribute a FreeRTOS port is documented [here](https://github.com/FreeRTOS/FreeRTOS-Kernel-Partner…
44 community supported FreeRTOS port:
47 * Tests may or may not exist for the FreeRTOS port.
50 A new FreeRTOS port can be directly contributed by anyone. The process to
51 contribute a FreeRTOS port is documented [here](https://github.com/FreeRTOS/FreeRTOS-Kernel-Communi…
|
| /Kernel-v11.1.0/portable/IAR/ARM_CM7/ |
| D | ReadMe.txt | 6 the FreeRTOS port provided specifically for r0p1 revisions, as that can be used
9 The first option is to use the ARM Cortex-M4F port, and the second option is to
10 use the Cortex-M7 r0p1 port - the latter containing a minor errata workaround.
13 used, but it is recommended to use the FreeRTOS ARM Cortex-M4F port located in
17 Cortex-M7 r0p1 port located in the /FreeRTOS/Source/portable/IAR/ARM_CM7/r0p1
|
| /Kernel-v11.1.0/portable/GCC/ARM_CM7/ |
| D | ReadMe.txt | 6 the FreeRTOS port provided specifically for r0p1 revisions, as that can be used
9 The first option is to use the ARM Cortex-M4F port, and the second option is to
10 use the Cortex-M7 r0p1 port - the latter containing a minor errata workaround.
13 used, but it is recommended to use the FreeRTOS ARM Cortex-M4F port located in
17 Cortex-M7 r0p1 port located in the /FreeRTOS/Source/portable/GCC/ARM_CM7/r0p1
|
| /Kernel-v11.1.0/portable/RVDS/ARM_CM7/ |
| D | ReadMe.txt | 6 the FreeRTOS port provided specifically for r0p1 revisions, as that can be used
9 The first option is to use the ARM Cortex-M4F port, and the second option is to
10 use the Cortex-M7 r0p1 port - the latter containing a minor errata workaround.
13 used, but it is recommended to use the FreeRTOS ARM Cortex-M4F port located in
17 Cortex-M7 r0p1 port located in the /FreeRTOS/Source/portable/RVDS/ARM_CM7/r0p1
|
| /Kernel-v11.1.0/portable/GCC/MCF5235/ |
| D | readme.md | 1 The MCF5235 port is deprecated. The last FreeRTOS version that includes this port is 10.4.3.
|
| /Kernel-v11.1.0/portable/ARMClang/ |
| D | Use-the-GCC-ports.txt | 1 The FreeRTOS GCC port layer also builds and works with the ARMClang compiler.
2 To use the ARMClang compiler build the port files from FreeRTOS/Source/portable/GCC.
|
| /Kernel-v11.1.0/portable/GCC/ARM_AARCH64/ |
| D | README.md | 16 ## ARM_AARCH64 port
18 This port adds support for Armv8-A architecture AArch64 execution state.
19 This port is generic and can be used as a starting point for Armv8-A
|
| /Kernel-v11.1.0/portable/GCC/ARM_AARCH64_SRE/ |
| D | README.md | 16 ## ARM_AARCH64_SRE port
18 This port adds support for Armv8-A architecture AArch64 execution state.
19 This port is generic and can be used as a starting point for Armv8-A
|
| /Kernel-v11.1.0/portable/IAR/RISC-V/chip_specific_extensions/ |
| D | readme.txt | 2 * The FreeRTOS kernel's RISC-V port is split between the the code that is
4 * RISC-V ISA), and code that tailors the port to a specific RISC-V chip:
11 * code that tailors the FreeRTOS kernel's RISC-V port to a specific RISC-V
|
| /Kernel-v11.1.0/portable/IAR/RISC-V/ |
| D | readme.txt | 2 * The FreeRTOS kernel's RISC-V port is split between the the code that is
4 * RISC-V ISA), and code that tailors the port to a specific RISC-V chip:
11 * code that tailors the FreeRTOS kernel's RISC-V port to a specific RISC-V
|
| /Kernel-v11.1.0/portable/GCC/RISC-V/chip_specific_extensions/ |
| D | readme.txt | 2 * The FreeRTOS kernel's RISC-V port is split between the the code that is
4 * RISC-V ISA), and code that tailors the port to a specific RISC-V chip:
11 * code that tailors the FreeRTOS kernel's RISC-V port to a specific RISC-V
|
| /Kernel-v11.1.0/portable/GCC/RISC-V/ |
| D | readme.txt | 2 * The FreeRTOS kernel's RISC-V port is split between the the code that is
4 * RISC-V ISA), and code that tailors the port to a specific RISC-V chip:
11 * code that tailors the FreeRTOS kernel's RISC-V port to a specific RISC-V
|
| /Kernel-v11.1.0/portable/ThirdParty/GCC/ARM_TFM/ |
| D | README.md | 1 # Target of this port
3 This port adds the support that FreeRTOS applications can call the secure
24 To build a project based on this port:
32 …edfirmware.org/TF-M/trusted-firmware-m.git/) to get the source code. This port is supported by TF-…
41 …le/ThirdParty/GCC/ARM_TFM` folder before using this port. Note that TrustZone is enabled in this p…
48 This macro should be configured as 0. In this port, TF-M runs in the Secure Side while FreeRTOS
|
| /Kernel-v11.1.0/portable/GCC/RX600/ |
| D | readme.txt | 1 The following table shows which port is recommended to be used.
46 the configuration function. Please be aware that port.c is hard coded to use CMT0 though it seems …
50 functionality is used, please modify port.c for the configuration. Please be aware that port.c is
62 …: PriorityDefinitions.h has to be provided for port_asm.s in case of other than RX700v3_DPFPU port.
|
| /Kernel-v11.1.0/portable/GCC/RX600v2/ |
| D | readme.txt | 1 The following table shows which port is recommended to be used.
46 the configuration function. Please be aware that port.c is hard coded to use CMT0 though it seems …
50 functionality is used, please modify port.c for the configuration. Please be aware that port.c is
62 …: PriorityDefinitions.h has to be provided for port_asm.s in case of other than RX700v3_DPFPU port.
|
| /Kernel-v11.1.0/portable/IAR/RX600/ |
| D | readme.txt | 1 The following table shows which port is recommended to be used.
46 the configuration function. Please be aware that port.c is hard coded to use CMT0 though it seems …
50 functionality is used, please modify port.c for the configuration. Please be aware that port.c is
62 …: PriorityDefinitions.h has to be provided for port_asm.s in case of other than RX700v3_DPFPU port.
|
| /Kernel-v11.1.0/portable/IAR/RX700v3_DPFPU/ |
| D | readme.txt | 1 The following table shows which port is recommended to be used.
46 the configuration function. Please be aware that port.c is hard coded to use CMT0 though it seems …
50 functionality is used, please modify port.c for the configuration. Please be aware that port.c is
62 …: PriorityDefinitions.h has to be provided for port_asm.s in case of other than RX700v3_DPFPU port.
|
| /Kernel-v11.1.0/portable/IAR/RX100/ |
| D | readme.txt | 1 The following table shows which port is recommended to be used.
46 the configuration function. Please be aware that port.c is hard coded to use CMT0 though it seems …
50 functionality is used, please modify port.c for the configuration. Please be aware that port.c is
62 …: PriorityDefinitions.h has to be provided for port_asm.s in case of other than RX700v3_DPFPU port.
|
| /Kernel-v11.1.0/portable/Renesas/RX100/ |
| D | readme.txt | 1 The following table shows which port is recommended to be used.
46 the configuration function. Please be aware that port.c is hard coded to use CMT0 though it seems …
50 functionality is used, please modify port.c for the configuration. Please be aware that port.c is
62 …: PriorityDefinitions.h has to be provided for port_asm.s in case of other than RX700v3_DPFPU port.
|
12345
