1 /** 2 ****************************************************************************** 3 * @file stm32l5xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 * This file should be copied to the application folder and renamed 7 * to stm32l5xx_hal_conf.h. 8 ****************************************************************************** 9 * @attention 10 * 11 * <h2><center>© Copyright (c) 2019 STMicroelectronics. 12 * All rights reserved.</center></h2> 13 * 14 * This software component is licensed by ST under BSD 3-Clause license, 15 * the "License"; You may not use this file except in compliance with the 16 * License. You may obtain a copy of the License at: 17 * opensource.org/licenses/BSD-3-Clause 18 * 19 ****************************************************************************** 20 */ 21 22 /* Define to prevent recursive inclusion -------------------------------------*/ 23 #ifndef STM32L5xx_HAL_CONF_H 24 #define STM32L5xx_HAL_CONF_H 25 26 #ifdef __cplusplus 27 extern "C" { 28 #endif 29 30 /* Exported types ------------------------------------------------------------*/ 31 /* Exported constants --------------------------------------------------------*/ 32 33 /* ########################## Module Selection ############################## */ 34 /** 35 * @brief This is the list of modules to be used in the HAL driver 36 */ 37 #define HAL_MODULE_ENABLED 38 /* #define HAL_ADC_MODULE_ENABLED */ 39 /* #define HAL_COMP_MODULE_ENABLED */ 40 #define HAL_CORTEX_MODULE_ENABLED 41 /* #define HAL_CRC_MODULE_ENABLED */ 42 #define HAL_CRYP_MODULE_ENABLED 43 /* #define HAL_DAC_MODULE_ENABLED */ 44 /* #define HAL_DFSDM_MODULE_ENABLED */ 45 #define HAL_DMA_MODULE_ENABLED 46 #define HAL_EXTI_MODULE_ENABLED 47 /* #define HAL_FDCAN_MODULE_ENABLED */ 48 #define HAL_FLASH_MODULE_ENABLED 49 #define HAL_GPIO_MODULE_ENABLED 50 #define HAL_GTZC_MODULE_ENABLED 51 #define HAL_HASH_MODULE_ENABLED 52 /* #define HAL_I2C_MODULE_ENABLED */ 53 /* #define HAL_ICACHE_MODULE_ENABLED */ 54 /* #define HAL_IRDA_MODULE_ENABLED */ 55 /* #define HAL_IWDG_MODULE_ENABLED */ 56 /* #define HAL_LPTIM_MODULE_ENABLED */ 57 /* #define HAL_MMC_MODULE_ENABLED */ 58 /* #define HAL_NAND_MODULE_ENABLED */ 59 /* #define HAL_NOR_MODULE_ENABLED */ 60 /* #define HAL_OPAMP_MODULE_ENABLED */ 61 #define HAL_OSPI_MODULE_ENABLED 62 /* #define HAL_OTFDEC_MODULE_ENABLED */ 63 /* #define HAL_PCD_MODULE_ENABLED */ 64 #define HAL_PKA_MODULE_ENABLED 65 #define HAL_PWR_MODULE_ENABLED 66 #define HAL_RCC_MODULE_ENABLED 67 #define HAL_RNG_MODULE_ENABLED 68 /* #define HAL_RTC_MODULE_ENABLED */ 69 /* #define HAL_SAI_MODULE_ENABLED */ 70 /* #define HAL_SD_MODULE_ENABLED */ 71 /* #define HAL_SMARTCARD_MODULE_ENABLED */ 72 /* #define HAL_SMBUS_MODULE_ENABLED */ 73 /* #define HAL_SPI_MODULE_ENABLED */ 74 /* #define HAL_SRAM_MODULE_ENABLED */ 75 /* #define HAL_TIM_MODULE_ENABLED */ 76 /* #define HAL_TSC_MODULE_ENABLED */ 77 #define HAL_UART_MODULE_ENABLED 78 /* #define HAL_USART_MODULE_ENABLED */ 79 /* #define HAL_WWDG_MODULE_ENABLED */ 80 81 82 /* ########################## Oscillator Values adaptation ####################*/ 83 /** 84 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 85 * This value is used by the RCC HAL module to compute the system frequency 86 * (when HSE is used as system clock source, directly or through the PLL). 87 */ 88 #if !defined (HSE_VALUE) 89 #define HSE_VALUE 16000000U /*!< Value of the External oscillator in Hz */ 90 #endif /* HSE_VALUE */ 91 92 #if !defined (HSE_STARTUP_TIMEOUT) 93 #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ 94 #endif /* HSE_STARTUP_TIMEOUT */ 95 96 /** 97 * @brief Internal Multiple Speed oscillator (MSI) default value. 98 * This value is the default MSI range value after Reset. 99 */ 100 #if !defined (MSI_VALUE) 101 #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ 102 #endif /* MSI_VALUE */ 103 104 /** 105 * @brief Internal High Speed oscillator (HSI) value. 106 * This value is used by the RCC HAL module to compute the system frequency 107 * (when HSI is used as system clock source, directly or through the PLL). 108 */ 109 #if !defined (HSI_VALUE) 110 #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ 111 #endif /* HSI_VALUE */ 112 113 /** 114 * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. 115 * This internal oscillator is mainly dedicated to provide a high precision clock to 116 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 117 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 118 * which is subject to manufacturing process variations. 119 */ 120 #if !defined (HSI48_VALUE) 121 #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. 122 The real value my vary depending on manufacturing process variations.*/ 123 #endif /* HSI48_VALUE */ 124 125 /** 126 * @brief Internal Low Speed oscillator (LSI) value. 127 */ 128 #if !defined (LSI_VALUE) 129 #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ 130 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 131 The real value may vary depending on the variations 132 in voltage and temperature.*/ 133 /** 134 * @brief External Low Speed oscillator (LSE) value. 135 * This value is used by the UART, RTC HAL module to compute the system frequency 136 */ 137 #if !defined (LSE_VALUE) 138 #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ 139 #endif /* LSE_VALUE */ 140 141 #if !defined (LSE_STARTUP_TIMEOUT) 142 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ 143 #endif /* HSE_STARTUP_TIMEOUT */ 144 145 /** 146 * @brief External clock source for SAI1 peripheral 147 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 148 * frequency. 149 */ 150 #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) 151 #define EXTERNAL_SAI1_CLOCK_VALUE 48000U /*!< Value of the SAI1 External clock source in Hz*/ 152 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */ 153 154 /** 155 * @brief External clock source for SAI2 peripheral 156 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 157 * frequency. 158 */ 159 #if !defined (EXTERNAL_SAI2_CLOCK_VALUE) 160 #define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/ 161 #endif /* EXTERNAL_SAI2_CLOCK_VALUE */ 162 163 /* Tip: To avoid modifying this file each time you need to use different HSE, 164 === you can define the HSE value in your toolchain compiler preprocessor. */ 165 166 /* ########################### System Configuration ######################### */ 167 /** 168 * @brief This is the HAL system configuration section 169 */ 170 #define VDD_VALUE 3300U /*!< Value of VDD in mv */ 171 #define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */ 172 #define USE_RTOS 0U 173 174 /* ########################## Assert Selection ############################## */ 175 /** 176 * @brief Uncomment the line below to expanse the "assert_param" macro in the 177 * HAL drivers code 178 */ 179 /* #define USE_FULL_ASSERT 1U */ 180 181 /* ################## Register callback feature configuration ############### */ 182 /** 183 * @brief Set below the peripheral configuration to "1U" to add the support 184 * of HAL callback registration/unregistration feature for the HAL 185 * driver(s). This allows user application to provide specific callback 186 * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting 187 * the default weak callback functions (see each stm32l5xx_hal_ppp.h file 188 * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef 189 * for each PPP peripheral). 190 */ 191 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 192 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 193 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U 194 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 195 #define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U 196 #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U 197 #define USE_HAL_HASH_REGISTER_CALLBACKS 0U 198 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 199 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 200 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U 201 #define USE_HAL_MMC_REGISTER_CALLBACKS 0U 202 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U 203 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U 204 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 205 #define USE_HAL_OSPI_REGISTER_CALLBACKS 0U 206 #define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U 207 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 208 #define USE_HAL_PKA_REGISTER_CALLBACKS 0U 209 #define USE_HAL_RNG_REGISTER_CALLBACKS 0U 210 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 211 #define USE_HAL_SAI_REGISTER_CALLBACKS 0U 212 #define USE_HAL_SD_REGISTER_CALLBACKS 0U 213 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 214 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U 215 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 216 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U 217 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 218 #define USE_HAL_TSC_REGISTER_CALLBACKS 0U 219 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 220 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 221 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 222 223 /* ################## SPI peripheral configuration ########################## */ 224 225 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 226 * Activated: CRC code is present inside driver 227 * Deactivated: CRC code cleaned from driver 228 */ 229 230 #define USE_SPI_CRC 1U 231 232 /* ################## CRYP peripheral configuration ########################## */ 233 234 #define USE_HAL_CRYP_SUSPEND_RESUME 1U 235 236 /* ################## SDMMC peripheral configuration ######################### */ 237 238 #define USE_SD_TRANSCEIVER 0U 239 240 241 242 /* Includes ------------------------------------------------------------------*/ 243 /** 244 * @brief Include module's header file 245 */ 246 247 #ifdef HAL_RCC_MODULE_ENABLED 248 #include "stm32l5xx_hal_rcc.h" 249 #endif /* HAL_RCC_MODULE_ENABLED */ 250 251 #ifdef HAL_GPIO_MODULE_ENABLED 252 #include "stm32l5xx_hal_gpio.h" 253 #endif /* HAL_GPIO_MODULE_ENABLED */ 254 255 #ifdef HAL_DMA_MODULE_ENABLED 256 #include "stm32l5xx_hal_dma.h" 257 #endif /* HAL_DMA_MODULE_ENABLED */ 258 259 #ifdef HAL_DFSDM_MODULE_ENABLED 260 #include "stm32l5xx_hal_dfsdm.h" 261 #endif /* HAL_DFSDM_MODULE_ENABLED */ 262 263 #ifdef HAL_CORTEX_MODULE_ENABLED 264 #include "stm32l5xx_hal_cortex.h" 265 #endif /* HAL_CORTEX_MODULE_ENABLED */ 266 267 #ifdef HAL_ADC_MODULE_ENABLED 268 #include "stm32l5xx_hal_adc.h" 269 #endif /* HAL_ADC_MODULE_ENABLED */ 270 271 #ifdef HAL_COMP_MODULE_ENABLED 272 #include "stm32l5xx_hal_comp.h" 273 #endif /* HAL_COMP_MODULE_ENABLED */ 274 275 #ifdef HAL_CRC_MODULE_ENABLED 276 #include "stm32l5xx_hal_crc.h" 277 #endif /* HAL_CRC_MODULE_ENABLED */ 278 279 #ifdef HAL_CRYP_MODULE_ENABLED 280 #include "stm32l5xx_hal_cryp.h" 281 #endif /* HAL_CRYP_MODULE_ENABLED */ 282 283 #ifdef HAL_DAC_MODULE_ENABLED 284 #include "stm32l5xx_hal_dac.h" 285 #endif /* HAL_DAC_MODULE_ENABLED */ 286 287 #ifdef HAL_EXTI_MODULE_ENABLED 288 #include "stm32l5xx_hal_exti.h" 289 #endif /* HAL_EXTI_MODULE_ENABLED */ 290 291 #ifdef HAL_FDCAN_MODULE_ENABLED 292 #include "stm32l5xx_hal_fdcan.h" 293 #endif /* HAL_FDCAN_MODULE_ENABLED */ 294 295 #ifdef HAL_FLASH_MODULE_ENABLED 296 #include "stm32l5xx_hal_flash.h" 297 #endif /* HAL_FLASH_MODULE_ENABLED */ 298 299 #ifdef HAL_GTZC_MODULE_ENABLED 300 #include "stm32l5xx_hal_gtzc.h" 301 #endif /* HAL_GTZC_MODULE_ENABLED */ 302 303 #ifdef HAL_HASH_MODULE_ENABLED 304 #include "stm32l5xx_hal_hash.h" 305 #endif /* HAL_HASH_MODULE_ENABLED */ 306 307 #ifdef HAL_I2C_MODULE_ENABLED 308 #include "stm32l5xx_hal_i2c.h" 309 #endif /* HAL_I2C_MODULE_ENABLED */ 310 311 #ifdef HAL_ICACHE_MODULE_ENABLED 312 #include "stm32l5xx_hal_icache.h" 313 #endif /* HAL_ICACHE_MODULE_ENABLED */ 314 315 #ifdef HAL_IRDA_MODULE_ENABLED 316 #include "stm32l5xx_hal_irda.h" 317 #endif /* HAL_IRDA_MODULE_ENABLED */ 318 319 #ifdef HAL_IWDG_MODULE_ENABLED 320 #include "stm32l5xx_hal_iwdg.h" 321 #endif /* HAL_IWDG_MODULE_ENABLED */ 322 323 #ifdef HAL_LPTIM_MODULE_ENABLED 324 #include "stm32l5xx_hal_lptim.h" 325 #endif /* HAL_LPTIM_MODULE_ENABLED */ 326 327 #ifdef HAL_MMC_MODULE_ENABLED 328 #include "stm32l5xx_hal_mmc.h" 329 #endif /* HAL_MMC_MODULE_ENABLED */ 330 331 #ifdef HAL_NAND_MODULE_ENABLED 332 #include "stm32l5xx_hal_nand.h" 333 #endif /* HAL_NAND_MODULE_ENABLED */ 334 335 #ifdef HAL_NOR_MODULE_ENABLED 336 #include "stm32l5xx_hal_nor.h" 337 #endif /* HAL_NOR_MODULE_ENABLED */ 338 339 #ifdef HAL_OPAMP_MODULE_ENABLED 340 #include "stm32l5xx_hal_opamp.h" 341 #endif /* HAL_OPAMP_MODULE_ENABLED */ 342 343 #ifdef HAL_OSPI_MODULE_ENABLED 344 #include "stm32l5xx_hal_ospi.h" 345 #endif /* HAL_OSPI_MODULE_ENABLED */ 346 347 #ifdef HAL_OTFDEC_MODULE_ENABLED 348 #include "stm32l5xx_hal_otfdec.h" 349 #endif /* HAL_OTFDEC_MODULE_ENABLED */ 350 351 #ifdef HAL_PCD_MODULE_ENABLED 352 #include "stm32l5xx_hal_pcd.h" 353 #endif /* HAL_PCD_MODULE_ENABLED */ 354 355 #ifdef HAL_PKA_MODULE_ENABLED 356 #include "stm32l5xx_hal_pka.h" 357 #endif /* HAL_PKA_MODULE_ENABLED */ 358 359 #ifdef HAL_PWR_MODULE_ENABLED 360 #include "stm32l5xx_hal_pwr.h" 361 #endif /* HAL_PWR_MODULE_ENABLED */ 362 363 #ifdef HAL_RNG_MODULE_ENABLED 364 #include "stm32l5xx_hal_rng.h" 365 #endif /* HAL_RNG_MODULE_ENABLED */ 366 367 #ifdef HAL_RTC_MODULE_ENABLED 368 #include "stm32l5xx_hal_rtc.h" 369 #endif /* HAL_RTC_MODULE_ENABLED */ 370 371 #ifdef HAL_SAI_MODULE_ENABLED 372 #include "stm32l5xx_hal_sai.h" 373 #endif /* HAL_SAI_MODULE_ENABLED */ 374 375 #ifdef HAL_SD_MODULE_ENABLED 376 #include "stm32l5xx_hal_sd.h" 377 #endif /* HAL_SD_MODULE_ENABLED */ 378 379 #ifdef HAL_SMARTCARD_MODULE_ENABLED 380 #include "stm32l5xx_hal_smartcard.h" 381 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 382 383 #ifdef HAL_SMBUS_MODULE_ENABLED 384 #include "stm32l5xx_hal_smbus.h" 385 #endif /* HAL_SMBUS_MODULE_ENABLED */ 386 387 #ifdef HAL_SPI_MODULE_ENABLED 388 #include "stm32l5xx_hal_spi.h" 389 #endif /* HAL_SPI_MODULE_ENABLED */ 390 391 #ifdef HAL_SRAM_MODULE_ENABLED 392 #include "stm32l5xx_hal_sram.h" 393 #endif /* HAL_SRAM_MODULE_ENABLED */ 394 395 #ifdef HAL_TIM_MODULE_ENABLED 396 #include "stm32l5xx_hal_tim.h" 397 #endif /* HAL_TIM_MODULE_ENABLED */ 398 399 #ifdef HAL_TSC_MODULE_ENABLED 400 #include "stm32l5xx_hal_tsc.h" 401 #endif /* HAL_TSC_MODULE_ENABLED */ 402 403 #ifdef HAL_UART_MODULE_ENABLED 404 #include "stm32l5xx_hal_uart.h" 405 #endif /* HAL_UART_MODULE_ENABLED */ 406 407 #ifdef HAL_USART_MODULE_ENABLED 408 #include "stm32l5xx_hal_usart.h" 409 #endif /* HAL_USART_MODULE_ENABLED */ 410 411 #ifdef HAL_WWDG_MODULE_ENABLED 412 #include "stm32l5xx_hal_wwdg.h" 413 #endif /* HAL_WWDG_MODULE_ENABLED */ 414 415 /* Exported macro ------------------------------------------------------------*/ 416 #ifdef USE_FULL_ASSERT 417 /** 418 * @brief The assert_param macro is used for function's parameters check. 419 * @param expr: If expr is false, it calls assert_failed function 420 * which reports the name of the source file and the source 421 * line number of the call that failed. 422 * If expr is true, it returns no value. 423 * @retval None 424 */ 425 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 426 /* Exported functions ------------------------------------------------------- */ 427 void assert_failed(uint8_t *file, uint32_t line); 428 #else 429 #define assert_param(expr) ((void)0U) 430 #endif /* USE_FULL_ASSERT */ 431 432 #ifdef __cplusplus 433 } 434 #endif 435 436 #endif /* STM32L5xx_HAL_CONF_H */ 437 438 439 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 440
