1 /* 2 * EAP peer configuration data 3 * Copyright (c) 2003-2019, Jouni Malinen <j@w1.fi> 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 */ 8 9 #ifndef EAP_CONFIG_H 10 #define EAP_CONFIG_H 11 12 /** 13 * struct eap_peer_cert_config - EAP peer certificate configuration/credential 14 */ 15 struct eap_peer_cert_config { 16 /** 17 * ca_cert - File path to CA certificate file (PEM/DER) 18 * 19 * This file can have one or more trusted CA certificates. If ca_cert 20 * and ca_path are not included, server certificate will not be 21 * verified. This is insecure and a trusted CA certificate should 22 * always be configured when using EAP-TLS/TTLS/PEAP. Full path to the 23 * file should be used since working directory may change when 24 * wpa_supplicant is run in the background. 25 * 26 * Alternatively, a named configuration blob can be used by setting 27 * this to blob://blob_name. 28 * 29 * Alternatively, this can be used to only perform matching of the 30 * server certificate (SHA-256 hash of the DER encoded X.509 31 * certificate). In this case, the possible CA certificates in the 32 * server certificate chain are ignored and only the server certificate 33 * is verified. This is configured with the following format: 34 * hash:://server/sha256/cert_hash_in_hex 35 * For example: "hash://server/sha256/ 36 * 5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" 37 * 38 * On Windows, trusted CA certificates can be loaded from the system 39 * certificate store by setting this to cert_store://name, e.g., 40 * ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". 41 * Note that when running wpa_supplicant as an application, the user 42 * certificate store (My user account) is used, whereas computer store 43 * (Computer account) is used when running wpasvc as a service. 44 */ 45 char *ca_cert; 46 47 /** 48 * ca_path - Directory path for CA certificate files (PEM) 49 * 50 * This path may contain multiple CA certificates in OpenSSL format. 51 * Common use for this is to point to system trusted CA list which is 52 * often installed into directory like /etc/ssl/certs. If configured, 53 * these certificates are added to the list of trusted CAs. ca_cert 54 * may also be included in that case, but it is not required. 55 */ 56 char *ca_path; 57 58 /** 59 * client_cert - File path to client certificate file (PEM/DER) 60 * 61 * This field is used with EAP method that use TLS authentication. 62 * Usually, this is only configured for EAP-TLS, even though this could 63 * in theory be used with EAP-TTLS and EAP-PEAP, too. Full path to the 64 * file should be used since working directory may change when 65 * wpa_supplicant is run in the background. 66 * 67 * Alternatively, a named configuration blob can be used by setting 68 * this to blob://blob_name. 69 */ 70 char *client_cert; 71 72 /** 73 * private_key - File path to client private key file (PEM/DER/PFX) 74 * 75 * When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be 76 * commented out. Both the private key and certificate will be read 77 * from the PKCS#12 file in this case. Full path to the file should be 78 * used since working directory may change when wpa_supplicant is run 79 * in the background. 80 * 81 * Windows certificate store can be used by leaving client_cert out and 82 * configuring private_key in one of the following formats: 83 * 84 * cert://substring_to_match 85 * 86 * hash://certificate_thumbprint_in_hex 87 * 88 * For example: private_key="hash://63093aa9c47f56ae88334c7b65a4" 89 * 90 * Note that when running wpa_supplicant as an application, the user 91 * certificate store (My user account) is used, whereas computer store 92 * (Computer account) is used when running wpasvc as a service. 93 * 94 * Alternatively, a named configuration blob can be used by setting 95 * this to blob://blob_name. 96 */ 97 char *private_key; 98 99 /** 100 * private_key_passwd - Password for private key file 101 * 102 * If left out, this will be asked through control interface. 103 */ 104 char *private_key_passwd; 105 106 /** 107 * dh_file - File path to DH/DSA parameters file (in PEM format) 108 * 109 * This is an optional configuration file for setting parameters for an 110 * ephemeral DH key exchange. In most cases, the default RSA 111 * authentication does not use this configuration. However, it is 112 * possible setup RSA to use ephemeral DH key exchange. In addition, 113 * ciphers with DSA keys always use ephemeral DH keys. This can be used 114 * to achieve forward secrecy. If the file is in DSA parameters format, 115 * it will be automatically converted into DH params. Full path to the 116 * file should be used since working directory may change when 117 * wpa_supplicant is run in the background. 118 * 119 * Alternatively, a named configuration blob can be used by setting 120 * this to blob://blob_name. 121 */ 122 char *dh_file; 123 124 /** 125 * subject_match - Constraint for server certificate subject 126 * 127 * This substring is matched against the subject of the authentication 128 * server certificate. If this string is set, the server certificate is 129 * only accepted if it contains this string in the subject. The subject 130 * string is in following format: 131 * 132 * /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@n.example.com 133 * 134 * Note: Since this is a substring match, this cannot be used securely 135 * to do a suffix match against a possible domain name in the CN entry. 136 * For such a use case, domain_suffix_match should be used instead. 137 */ 138 char *subject_match; 139 140 /** 141 * check_cert_subject - Constraint for server certificate subject fields 142 * 143 * If check_cert_subject is set, the value of every field will be 144 * checked against the DN of the subject in the authentication server 145 * certificate. If the values do not match, the certificate verification 146 * will fail, rejecting the server. This option allows wpa_supplicant to 147 * match every individual field in the right order against the DN of the 148 * subject in the server certificate. 149 * 150 * For example, check_cert_subject=C=US/O=XX/OU=ABC/OU=XYZ/CN=1234 will 151 * check every individual DN field of the subject in the server 152 * certificate. If OU=XYZ comes first in terms of the order in the 153 * server certificate (DN field of server certificate 154 * C=US/O=XX/OU=XYZ/OU=ABC/CN=1234), wpa_supplicant will reject the 155 * server because the order of 'OU' is not matching the specified string 156 * in check_cert_subject. 157 * 158 * This option also allows '*' as a wildcard. This option has some 159 * limitation. 160 * It can only be used as per the following example. 161 * 162 * For example, check_cert_subject=C=US/O=XX/OU=Production* and we have 163 * two servers and DN of the subject in the first server certificate is 164 * (C=US/O=XX/OU=Production Unit) and DN of the subject in the second 165 * server is (C=US/O=XX/OU=Production Factory). In this case, 166 * wpa_supplicant will allow both servers because the value of 'OU' 167 * field in both server certificates matches 'OU' value in 168 * 'check_cert_subject' up to 'wildcard'. 169 * 170 * (Allow all servers, e.g., check_cert_subject=*) 171 */ 172 char *check_cert_subject; 173 174 /** 175 * altsubject_match - Constraint for server certificate alt. subject 176 * 177 * Semicolon separated string of entries to be matched against the 178 * alternative subject name of the authentication server certificate. 179 * If this string is set, the server certificate is only accepted if it 180 * contains one of the entries in an alternative subject name 181 * extension. 182 * 183 * altSubjectName string is in following format: TYPE:VALUE 184 * 185 * Example: EMAIL:server@example.com 186 * Example: DNS:server.example.com;DNS:server2.example.com 187 * 188 * Following types are supported: EMAIL, DNS, URI 189 */ 190 char *altsubject_match; 191 192 /** 193 * domain_suffix_match - Constraint for server domain name 194 * 195 * If set, this semicolon deliminated list of FQDNs is used as suffix 196 * match requirements for the server certificate in SubjectAltName 197 * dNSName element(s). If a matching dNSName is found against any of the 198 * specified values, this constraint is met. If no dNSName values are 199 * present, this constraint is matched against SubjectName CN using same 200 * suffix match comparison. Suffix match here means that the host/domain 201 * name is compared case-insentively one label at a time starting from 202 * the top-level domain and all the labels in domain_suffix_match shall 203 * be included in the certificate. The certificate may include 204 * additional sub-level labels in addition to the required labels. 205 * 206 * For example, domain_suffix_match=example.com would match 207 * test.example.com but would not match test-example.com. Multiple 208 * match options can be specified in following manner: 209 * example.org;example.com. 210 */ 211 char *domain_suffix_match; 212 213 /** 214 * domain_match - Constraint for server domain name 215 * 216 * If set, this FQDN is used as a full match requirement for the 217 * server certificate in SubjectAltName dNSName element(s). If a 218 * matching dNSName is found, this constraint is met. If no dNSName 219 * values are present, this constraint is matched against SubjectName CN 220 * using same full match comparison. This behavior is similar to 221 * domain_suffix_match, but has the requirement of a full match, i.e., 222 * no subdomains or wildcard matches are allowed. Case-insensitive 223 * comparison is used, so "Example.com" matches "example.com", but would 224 * not match "test.Example.com". 225 * 226 * More than one match string can be provided by using semicolons to 227 * separate the strings (e.g., example.org;example.com). When multiple 228 * strings are specified, a match with any one of the values is 229 * considered a sufficient match for the certificate, i.e., the 230 * conditions are ORed together. 231 */ 232 char *domain_match; 233 234 /** 235 * pin - PIN for USIM, GSM SIM, and smartcards 236 * 237 * This field is used to configure PIN for SIM and smartcards for 238 * EAP-SIM and EAP-AKA. In addition, this is used with EAP-TLS if a 239 * smartcard is used for private key operations. 240 * 241 * If left out, this will be asked through control interface. 242 */ 243 char *pin; 244 245 /** 246 * engine - Enable OpenSSL engine (e.g., for smartcard access) 247 * 248 * This is used if private key operations for EAP-TLS are performed 249 * using a smartcard. 250 */ 251 int engine; 252 253 /** 254 * engine_id - Engine ID for OpenSSL engine 255 * 256 * "opensc" to select OpenSC engine or "pkcs11" to select PKCS#11 257 * engine. 258 * 259 * This is used if private key operations for EAP-TLS are performed 260 * using a smartcard. 261 */ 262 char *engine_id; 263 264 265 /** 266 * key_id - Key ID for OpenSSL engine 267 * 268 * This is used if private key operations for EAP-TLS are performed 269 * using a smartcard. 270 */ 271 char *key_id; 272 273 /** 274 * cert_id - Cert ID for OpenSSL engine 275 * 276 * This is used if the certificate operations for EAP-TLS are performed 277 * using a smartcard. 278 */ 279 char *cert_id; 280 281 /** 282 * ca_cert_id - CA Cert ID for OpenSSL engine 283 * 284 * This is used if the CA certificate for EAP-TLS is on a smartcard. 285 */ 286 char *ca_cert_id; 287 288 /** 289 * ocsp - Whether to use/require OCSP to check server certificate 290 * 291 * 0 = do not use OCSP stapling (TLS certificate status extension) 292 * 1 = try to use OCSP stapling, but not require response 293 * 2 = require valid OCSP stapling response 294 */ 295 int ocsp; 296 }; 297 298 /** 299 * struct eap_peer_config - EAP peer configuration/credentials 300 */ 301 struct eap_peer_config { 302 /** 303 * identity - EAP Identity 304 * 305 * This field is used to set the real user identity or NAI (for 306 * EAP-PSK/PAX/SAKE/GPSK). 307 */ 308 u8 *identity; 309 310 /** 311 * identity_len - EAP Identity length 312 */ 313 size_t identity_len; 314 315 /** 316 * anonymous_identity - Anonymous EAP Identity 317 * 318 * This field is used for unencrypted use with EAP types that support 319 * different tunnelled identity, e.g., EAP-TTLS, in order to reveal the 320 * real identity (identity field) only to the authentication server. 321 * 322 * If not set, the identity field will be used for both unencrypted and 323 * protected fields. 324 * 325 * This field can also be used with EAP-SIM/AKA/AKA' to store the 326 * pseudonym identity. 327 */ 328 u8 *anonymous_identity; 329 330 /** 331 * anonymous_identity_len - Length of anonymous_identity 332 */ 333 size_t anonymous_identity_len; 334 335 u8 *imsi_identity; 336 size_t imsi_identity_len; 337 338 /** 339 * machine_identity - EAP Identity for machine credential 340 * 341 * This field is used to set the machine identity or NAI for cases where 342 * and explicit machine credential (instead of or in addition to a user 343 * credential (from %identity) is needed. 344 */ 345 u8 *machine_identity; 346 347 /** 348 * machine_identity_len - EAP Identity length for machine credential 349 */ 350 size_t machine_identity_len; 351 352 /** 353 * password - Password string for EAP 354 * 355 * This field can include either the plaintext password (default 356 * option) or a NtPasswordHash (16-byte MD4 hash of the unicode 357 * presentation of the password) if flags field has 358 * EAP_CONFIG_FLAGS_PASSWORD_NTHASH bit set to 1. NtPasswordHash can 359 * only be used with authentication mechanism that use this hash as the 360 * starting point for operation: MSCHAP and MSCHAPv2 (EAP-MSCHAPv2, 361 * EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP). 362 * 363 * In addition, this field is used to configure a pre-shared key for 364 * EAP-PSK/PAX/SAKE/GPSK. The length of the PSK must be 16 for EAP-PSK 365 * and EAP-PAX and 32 for EAP-SAKE. EAP-GPSK can use a variable length 366 * PSK. 367 */ 368 u8 *password; 369 370 /** 371 * password_len - Length of password field 372 */ 373 size_t password_len; 374 375 /** 376 * machine_password - Password string for EAP machine credential 377 * 378 * This field is used when machine credential based on username/password 379 * is needed instead of a user credential (from %password). See 380 * %password for more details on the format. 381 */ 382 u8 *machine_password; 383 384 /** 385 * machine_password_len - Length of machine credential password field 386 */ 387 size_t machine_password_len; 388 389 /** 390 * cert - Certificate parameters for Phase 1 391 */ 392 struct eap_peer_cert_config cert; 393 394 /** 395 * phase2_cert - Certificate parameters for Phase 2 396 * 397 * This is like cert, but used for Phase 2 (inside 398 * EAP-TTLS/PEAP/FAST/TEAP tunnel) authentication. 399 */ 400 struct eap_peer_cert_config phase2_cert; 401 402 /** 403 * machine_cert - Certificate parameters for Phase 2 machine credential 404 * 405 * This is like cert, but used for Phase 2 (inside EAP-TEAP tunnel) 406 * authentication with machine credentials (while phase2_cert is used 407 * for user credentials). 408 */ 409 struct eap_peer_cert_config machine_cert; 410 411 /** 412 * eap_methods - Allowed EAP methods 413 * 414 * (vendor=EAP_VENDOR_IETF,method=EAP_TYPE_NONE) terminated list of 415 * allowed EAP methods or %NULL if all methods are accepted. 416 */ 417 struct eap_method_type *eap_methods; 418 419 /** 420 * phase1 - Phase 1 (outer authentication) parameters 421 * 422 * String with field-value pairs, e.g., "peapver=0" or 423 * "peapver=1 peaplabel=1". 424 * 425 * 'peapver' can be used to force which PEAP version (0 or 1) is used. 426 * 427 * 'peaplabel=1' can be used to force new label, "client PEAP 428 * encryption", to be used during key derivation when PEAPv1 or newer. 429 * 430 * Most existing PEAPv1 implementation seem to be using the old label, 431 * "client EAP encryption", and wpa_supplicant is now using that as the 432 * default value. 433 * 434 * Some servers, e.g., Radiator, may require peaplabel=1 configuration 435 * to interoperate with PEAPv1; see eap_testing.txt for more details. 436 * 437 * 'peap_outer_success=0' can be used to terminate PEAP authentication 438 * on tunneled EAP-Success. This is required with some RADIUS servers 439 * that implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., 440 * Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode). 441 * 442 * include_tls_length=1 can be used to force wpa_supplicant to include 443 * TLS Message Length field in all TLS messages even if they are not 444 * fragmented. 445 * 446 * sim_min_num_chal=3 can be used to configure EAP-SIM to require three 447 * challenges (by default, it accepts 2 or 3). 448 * 449 * result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use 450 * protected result indication. 451 * 452 * fast_provisioning option can be used to enable in-line provisioning 453 * of EAP-FAST credentials (PAC): 454 * 0 = disabled, 455 * 1 = allow unauthenticated provisioning, 456 * 2 = allow authenticated provisioning, 457 * 3 = allow both unauthenticated and authenticated provisioning 458 * 459 * fast_max_pac_list_len=num option can be used to set the maximum 460 * number of PAC entries to store in a PAC list (default: 10). 461 * 462 * fast_pac_format=binary option can be used to select binary format 463 * for storing PAC entries in order to save some space (the default 464 * text format uses about 2.5 times the size of minimal binary format). 465 * 466 * crypto_binding option can be used to control PEAPv0 cryptobinding 467 * behavior: 468 * 0 = do not use cryptobinding (default) 469 * 1 = use cryptobinding if server supports it 470 * 2 = require cryptobinding 471 * 472 * EAP-WSC (WPS) uses following options: pin=Device_Password and 473 * uuid=Device_UUID 474 * 475 * For wired IEEE 802.1X authentication, "allow_canned_success=1" can be 476 * used to configure a mode that allows EAP-Success (and EAP-Failure) 477 * without going through authentication step. Some switches use such 478 * sequence when forcing the port to be authorized/unauthorized or as a 479 * fallback option if the authentication server is unreachable. By 480 * default, wpa_supplicant discards such frames to protect against 481 * potential attacks by rogue devices, but this option can be used to 482 * disable that protection for cases where the server/authenticator does 483 * not need to be authenticated. 484 */ 485 char *phase1; 486 487 /** 488 * phase2 - Phase2 (inner authentication with TLS tunnel) parameters 489 * 490 * String with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or 491 * "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS. "mschapv2_retry=0" can 492 * be used to disable MSCHAPv2 password retry in authentication failure 493 * cases. 494 */ 495 char *phase2; 496 497 /** 498 * machine_phase2 - Phase2 parameters for machine credentials 499 * 500 * See phase2 for more details. 501 */ 502 char *machine_phase2; 503 504 /** 505 * pcsc - Parameters for PC/SC smartcard interface for USIM and GSM SIM 506 * 507 * This field is used to configure PC/SC smartcard interface. 508 * Currently, the only configuration is whether this field is %NULL (do 509 * not use PC/SC) or non-NULL (e.g., "") to enable PC/SC. 510 * 511 * This field is used for EAP-SIM and EAP-AKA. 512 */ 513 char *pcsc; 514 515 /** 516 * otp - One-time-password 517 * 518 * This field should not be set in configuration step. It is only used 519 * internally when OTP is entered through the control interface. 520 */ 521 u8 *otp; 522 523 /** 524 * otp_len - Length of the otp field 525 */ 526 size_t otp_len; 527 528 /** 529 * pending_req_identity - Whether there is a pending identity request 530 * 531 * This field should not be set in configuration step. It is only used 532 * internally when control interface is used to request needed 533 * information. 534 */ 535 int pending_req_identity; 536 537 /** 538 * pending_req_password - Whether there is a pending password request 539 * 540 * This field should not be set in configuration step. It is only used 541 * internally when control interface is used to request needed 542 * information. 543 */ 544 int pending_req_password; 545 546 /** 547 * pending_req_pin - Whether there is a pending PIN request 548 * 549 * This field should not be set in configuration step. It is only used 550 * internally when control interface is used to request needed 551 * information. 552 */ 553 int pending_req_pin; 554 555 /** 556 * pending_req_new_password - Pending password update request 557 * 558 * This field should not be set in configuration step. It is only used 559 * internally when control interface is used to request needed 560 * information. 561 */ 562 int pending_req_new_password; 563 564 /** 565 * pending_req_passphrase - Pending passphrase request 566 * 567 * This field should not be set in configuration step. It is only used 568 * internally when control interface is used to request needed 569 * information. 570 */ 571 int pending_req_passphrase; 572 573 /** 574 * pending_req_sim - Pending SIM request 575 * 576 * This field should not be set in configuration step. It is only used 577 * internally when control interface is used to request needed 578 * information. 579 */ 580 int pending_req_sim; 581 582 /** 583 * pending_req_otp - Whether there is a pending OTP request 584 * 585 * This field should not be set in configuration step. It is only used 586 * internally when control interface is used to request needed 587 * information. 588 */ 589 char *pending_req_otp; 590 591 /** 592 * pending_req_otp_len - Length of the pending OTP request 593 */ 594 size_t pending_req_otp_len; 595 596 /** 597 * pac_file - File path or blob name for the PAC entries (EAP-FAST) 598 * 599 * wpa_supplicant will need to be able to create this file and write 600 * updates to it when PAC is being provisioned or refreshed. Full path 601 * to the file should be used since working directory may change when 602 * wpa_supplicant is run in the background. 603 * Alternatively, a named configuration blob can be used by setting 604 * this to blob://blob_name. 605 */ 606 char *pac_file; 607 608 /** 609 * mschapv2_retry - MSCHAPv2 retry in progress 610 * 611 * This field is used internally by EAP-MSCHAPv2 and should not be set 612 * as part of configuration. 613 */ 614 int mschapv2_retry; 615 616 /** 617 * new_password - New password for password update 618 * 619 * This field is used during MSCHAPv2 password update. This is normally 620 * requested from the user through the control interface and not set 621 * from configuration. 622 */ 623 u8 *new_password; 624 625 /** 626 * new_password_len - Length of new_password field 627 */ 628 size_t new_password_len; 629 630 /** 631 * fragment_size - Maximum EAP fragment size in bytes (default 1398) 632 * 633 * This value limits the fragment size for EAP methods that support 634 * fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set 635 * small enough to make the EAP messages fit in MTU of the network 636 * interface used for EAPOL. The default value is suitable for most 637 * cases. 638 */ 639 int fragment_size; 640 641 #define EAP_CONFIG_FLAGS_PASSWORD_NTHASH BIT(0) 642 #define EAP_CONFIG_FLAGS_EXT_PASSWORD BIT(1) 643 #define EAP_CONFIG_FLAGS_MACHINE_PASSWORD_NTHASH BIT(2) 644 #define EAP_CONFIG_FLAGS_EXT_MACHINE_PASSWORD BIT(3) 645 /** 646 * flags - Network configuration flags (bitfield) 647 * 648 * This variable is used for internal flags to describe further details 649 * for the network parameters. 650 * bit 0 = password is represented as a 16-byte NtPasswordHash value 651 * instead of plaintext password 652 * bit 1 = password is stored in external storage; the value in the 653 * password field is the name of that external entry 654 * bit 2 = machine password is represented as a 16-byte NtPasswordHash 655 * value instead of plaintext password 656 * bit 3 = machine password is stored in external storage; the value in 657 * the password field is the name of that external entry 658 */ 659 u32 flags; 660 661 /** 662 * external_sim_resp - Response from external SIM processing 663 * 664 * This field should not be set in configuration step. It is only used 665 * internally when control interface is used to request external 666 * SIM/USIM processing. 667 */ 668 char *external_sim_resp; 669 670 /** 671 * sim_num - User selected SIM identifier 672 * 673 * This variable is used for identifying which SIM is used if the system 674 * has more than one. 675 */ 676 int sim_num; 677 678 /** 679 * openssl_ciphers - OpenSSL cipher string 680 * 681 * This is an OpenSSL specific configuration option for configuring the 682 * ciphers for this connection. If not set, the default cipher suite 683 * list is used. 684 */ 685 char *openssl_ciphers; 686 687 /** 688 * erp - Whether EAP Re-authentication Protocol (ERP) is enabled 689 */ 690 int erp; 691 692 /** 693 * pending_ext_cert_check - External server certificate check status 694 * 695 * This field should not be set in configuration step. It is only used 696 * internally when control interface is used to request external 697 * validation of server certificate chain. 698 */ 699 enum { 700 NO_CHECK = 0, 701 PENDING_CHECK, 702 EXT_CERT_CHECK_GOOD, 703 EXT_CERT_CHECK_BAD, 704 } pending_ext_cert_check; 705 706 int teap_anon_dh; 707 }; 708 709 710 /** 711 * struct wpa_config_blob - Named configuration blob 712 * 713 * This data structure is used to provide storage for binary objects to store 714 * abstract information like certificates and private keys inlined with the 715 * configuration data. 716 */ 717 struct wpa_config_blob { 718 /** 719 * name - Blob name 720 */ 721 char *name; 722 723 /** 724 * data - Pointer to binary data 725 */ 726 u8 *data; 727 728 /** 729 * len - Length of binary data 730 */ 731 size_t len; 732 733 /** 734 * next - Pointer to next blob in the configuration 735 */ 736 struct wpa_config_blob *next; 737 }; 738 739 #endif /* EAP_CONFIG_H */ 740
