1 /* 2 * Copyright 2016-2023, Cypress Semiconductor Corporation or 3 * an affiliate of Cypress Semiconductor Corporation. All rights reserved. 4 * 5 * This software, including source code, documentation and related 6 * materials ("Software") is owned by Cypress Semiconductor Corporation 7 * or one of its affiliates ("Cypress") and is protected by and subject to 8 * worldwide patent protection (United States and foreign), 9 * United States copyright laws and international treaty provisions. 10 * Therefore, you may use this Software only as provided in the license 11 * agreement accompanying the software package from which you 12 * obtained this Software ("EULA"). 13 * If no EULA applies, Cypress hereby grants you a personal, non-exclusive, 14 * non-transferable license to copy, modify, and compile the Software 15 * source code solely for use in connection with Cypress's 16 * integrated circuit products. Any reproduction, modification, translation, 17 * compilation, or representation of this Software except as specified 18 * above is prohibited without the express written permission of Cypress. 19 * 20 * Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND, 21 * EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED 22 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress 23 * reserves the right to make changes to the Software without notice. Cypress 24 * does not assume any liability arising out of the application or use of the 25 * Software or any product or circuit described in the Software. Cypress does 26 * not authorize its products for use in any products where a malfunction or 27 * failure of the Cypress product may reasonably be expected to result in 28 * significant property damage, injury or death ("High Risk Product"). By 29 * including Cypress's product in a High Risk Product, the manufacturer 30 * of such system or application assumes all risk of such use and in doing 31 * so agrees to indemnify Cypress against all liability. 32 */ 33 /** @file 34 * 35 * Runtime Bluetooth configuration parameters 36 * 37 */ 38 #pragma once 39 40 #include "wiced_data_types.h" 41 #include "wiced_bt_types.h" 42 #include "gattdefs.h" 43 44 #ifdef __cplusplus 45 extern "C" { 46 #endif 47 48 /** 49 * @addtogroup wiced_bt_cfg Bluetooth Stack Initialize & Configuration 50 * 51 * 52 * This section describes API and Data structures required to initialize and configure the BT-Stack. 53 * 54 * @{ 55 */ 56 /***************************************************************************** 57 * Default configuration values 58 ****************************************************************************/ 59 /** */ 60 /** 61 * @anchor WICED_DEFAULT_CFG_VALUES 62 * @name Bluetooth Configuration Default Values 63 * @{ 64 * 65 * Bluetooth Configuration Default Values 66 * 67 * @note These are typical values for config parameters used for some common BLE, BR/EDR use cases. 68 */ 69 #define WICED_BT_CFG_DEFAULT_INQUIRY_SCAN_INTERVAL 0x0800 /**< Inquiry scan interval (in slots (1 slot = 0.625 ms)) */ 70 #define WICED_BT_CFG_DEFAULT_INQUIRY_SCAN_WINDOW 0x0012 /**< Inquiry scan window (in slots (1 slot = 0.625 ms)) */ 71 #define WICED_BT_CFG_DEFAULT_PAGE_SCAN_INTERVAL 0x0800 /**< Page scan interval (in slots (1 slot = 0.625 ms)) */ 72 #define WICED_BT_CFG_DEFAULT_PAGE_SCAN_WINDOW 0x0012 /**< Page scan window (in slots (1 slot = 0.625 ms)) */ 73 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_SCAN_INTERVAL 96 /**< High duty scan interval (in slots (1 slot = 0.625 ms)) */ 74 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_SCAN_WINDOW 48 /**< High duty scan window (in slots (1 slot = 0.625 ms)) */ 75 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_SCAN_INTERVAL 2048 /**< Low duty scan interval (in slots (1 slot = 0.625 ms)) */ 76 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_SCAN_WINDOW 18 /**< Low duty scan window (in slots (1 slot = 0.625 ms)) */ 77 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_CONN_SCAN_INTERVAL 96 /**< High duty cycle connection scan interval (in slots (1 slot = 0.625 ms)) */ 78 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_CONN_SCAN_WINDOW 48 /**< High duty cycle connection scan window (in slots (1 slot = 0.625 ms)) */ 79 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_CONN_SCAN_INTERVAL 2048 /**< Low duty cycle connection scan interval (in slots (1 slot = 0.625 ms)) */ 80 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_CONN_SCAN_WINDOW 18 /**< Low duty cycle connection scan window (in slots (1 slot = 0.625 ms)) */ 81 #define WICED_BT_CFG_DEFAULT_CONN_MIN_INTERVAL 80 /**< Minimum connection event interval ( in 1.25 msec) */ 82 #define WICED_BT_CFG_DEFAULT_CONN_MAX_INTERVAL 80 /**< Maximum connection event interval ( in 1.25 msec) */ 83 #define WICED_BT_CFG_DEFAULT_CONN_LATENCY 0 /**< Connection latency (in number of LL connection events) */ 84 #define WICED_BT_CFG_DEFAULT_CONN_SUPERVISION_TIMEOUT 700 /**< Connection link supervision timeout (in 10 msec) */ 85 86 /* undirected connectable advertisement high/low duty cycle interval default */ 87 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_ADV_MIN_INTERVAL 48 /**< Tgap(adv_fast_interval1) = 48 *0.625 = 30ms*/ 88 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_ADV_MAX_INTERVAL 48 /**< Tgap(adv_fast_interval1) = 48 *0.625 = 30ms*/ 89 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_ADV_MIN_INTERVAL 2048 /**< Tgap(adv_slow_interval) = 2048 * 0.625 = 1.28s */ 90 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_ADV_MAX_INTERVAL 2048 /**< Tgap(adv_slow_interval) = 2048 * 0.625 = 1.28s */ 91 92 /* non-connectable advertisement high/low duty cycle advertisement interval default */ 93 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_NONCONN_ADV_MIN_INTERVAL 160 /**< Tgap(adv_fast_interval2) = 160 * 0.625 = 100 ms */ 94 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_NONCONN_ADV_MAX_INTERVAL 160 /**< Tgap(adv_fast_interval2) = 160 * 0.625 = 100 ms */ 95 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_NONCONN_ADV_MIN_INTERVAL 2048 /**< Tgap(adv_slow_interval) = 2048 * 0.625 = 1.28s */ 96 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_NONCONN_ADV_MAX_INTERVAL 2048 /**< Tgap(adv_slow_interval) = 2048 * 0.625 = 1.28s */ 97 98 /* directed connectable advertisement high/low duty cycle interval default */ 99 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_DIRECTED_ADV_MIN_INTERVAL 400 /**< Tgap(dir_conn_adv_int_max) = 400 * 0.625 = 250 ms */ 100 #define WICED_BT_CFG_DEFAULT_HIGH_DUTY_DIRECTED_ADV_MAX_INTERVAL 800 /**< Tgap(dir_conn_adv_int_min) = 800 * 0.625 = 500 ms */ 101 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_DIRECTED_ADV_MIN_INTERVAL 48 /**< Tgap(adv_fast_interval1) = 48 * 0.625 = 30 ms */ 102 #define WICED_BT_CFG_DEFAULT_LOW_DUTY_DIRECTED_ADV_MAX_INTERVAL 48 /**< Tgap(adv_fast_interval1) = 48 * 0.625 = 30 ms */ 103 104 /* refreshment timing interval of random private address */ 105 #define WICED_BT_CFG_DEFAULT_RANDOM_ADDRESS_CHANGE_TIMEOUT 900 /**< default refreshment timing interval 900secs */ 106 #define WICED_BT_CFG_DEFAULT_RANDOM_ADDRESS_NEVER_CHANGE 0 /**< value for disabling random address refresh */ 107 #define WICED_BT_CFG_MAX_RANDOM_ADDRESS_CHANGE_TIMEOUT 3600 /**< max refreshment timing interval 3600secs*/ 108 109 /** @} WICED_DEFAULT_CFG_VALUES */ 110 111 /***************************************************************************** 112 * Wiced_bt core stack configuration 113 ****************************************************************************/ 114 /** Scan modes */ 115 enum wiced_bt_ble_scan_mode_e 116 { 117 BTM_BLE_SCAN_MODE_PASSIVE = 0, /**< Passive scan mode */ 118 BTM_BLE_SCAN_MODE_ACTIVE = 1, /**< Active scan mode */ 119 BTM_BLE_SCAN_MODE_NONE = 0xff /**< None */ 120 }; 121 typedef uint8_t wiced_bt_ble_scan_mode_t; /**< scan mode (see #wiced_bt_ble_scan_mode_e) */ 122 123 /** Security Service Levels (bit fields) */ 124 enum wiced_bt_sec_level_e 125 { 126 /** BTM_SEC_BEST_EFFORT : Recommended choice for most applications, to connect to the widest range of devices. 127 * Allows stack to choose the highest level of security possible between the two devices */ 128 BTM_SEC_BEST_EFFORT = 1, 129 130 /** BTM_SEC_SC_REQUIRED : Can be set by applications which need to enforce secure connections. 131 * Note: If this bit is set, the stack will only allow connections to devices paired using Secure Connections */ 132 BTM_SEC_SC_REQUIRED = 2, 133 134 /** BTM_SEC_AUTH_REQUIRED - Can be set by applications which need to enforce Authentication 135 * Note: If this bit is set, the stack will only allow connections to devices paired using authentication */ 136 BTM_SEC_AUTH_REQUIRED = 4, 137 138 /** BTM_SEC_SC_AUTH_REQUIRED : Can be set by applications which need to enforce secure connections with MITM protection. 139 * Note: If this bit is set, the stack will only allow connections to devices paired using Secure Connections with Man In The Middle (MITM) protection */ 140 BTM_SEC_SC_AUTH_REQUIRED = (BTM_SEC_SC_REQUIRED | 4), 141 }; 142 typedef uint8_t wiced_bt_sec_level_t; /**< Required security level */ 143 144 /** LE Scan settings */ 145 typedef struct 146 { 147 wiced_bt_ble_scan_mode_t scan_mode; /**< BLE scan mode \ref wiced_bt_ble_scan_mode_t */ 148 149 /* Advertisement scan configuration 150 * @note Refer to 7.8.10 LE Set Scan Parameters command 151 */ 152 uint16_t high_duty_scan_interval; /**< High duty scan interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_SCAN_INTERVAL) */ 153 uint16_t high_duty_scan_window; /**< High duty scan window (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_SCAN_WINDOW) */ 154 uint16_t high_duty_scan_duration; /**< High duty scan duration in seconds (0 for infinite) */ 155 156 uint16_t low_duty_scan_interval; /**< Low duty scan interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_SCAN_INTERVAL) */ 157 uint16_t low_duty_scan_window; /**< Low duty scan window (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_SCAN_WINDOW) */ 158 uint16_t low_duty_scan_duration; /**< Low duty scan duration in seconds (0 for infinite) */ 159 160 /* Connection scan configuration 161 * @note Refer to 7.8.10 LE Set Scan Parameters command 162 */ 163 uint16_t high_duty_conn_scan_interval; /**< High duty cycle connection scan interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_CONN_SCAN_INTERVAL) */ 164 uint16_t high_duty_conn_scan_window; /**< High duty cycle connection scan window (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_CONN_SCAN_WINDOW) */ 165 uint16_t high_duty_conn_duration; /**< High duty cycle connection duration in seconds (0 for infinite) */ 166 167 uint16_t low_duty_conn_scan_interval; /**< Low duty cycle connection scan interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_CONN_SCAN_INTERVAL) */ 168 uint16_t low_duty_conn_scan_window; /**< Low duty cycle connection scan window (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_CONN_SCAN_WINDOW) */ 169 uint16_t low_duty_conn_duration; /**< Low duty cycle connection duration in seconds (0 for infinite) */ 170 171 /* Connection configuration 172 * @note: Refer to description of valid values in the BT SIG Spec Ver 5.2, section 7.8.12 LE Create Connection command 173 */ 174 uint16_t conn_min_interval; /**< Minimum connection interval (in 1.25 msec) (default: #WICED_BT_CFG_DEFAULT_CONN_MIN_INTERVAL) */ 175 uint16_t conn_max_interval; /**< Maximum connection interval (in 1.25 msec) (default: #WICED_BT_CFG_DEFAULT_CONN_MAX_INTERVAL) */ 176 uint16_t conn_latency; /**< Connection latency */ 177 uint16_t conn_supervision_timeout; /**< Connection link supervision timeout (in 10 msec) (default: #WICED_BT_CFG_DEFAULT_CONN_SUPERVISION_TIMEOUT) */ 178 } wiced_bt_cfg_ble_scan_settings_t; 179 180 /** advertising channel map */ 181 enum wiced_bt_ble_advert_chnl_map_e 182 { 183 BTM_BLE_ADVERT_CHNL_37 = (0x01 << 0), /**< ADV channel */ 184 BTM_BLE_ADVERT_CHNL_38 = (0x01 << 1), /**< ADV channel */ 185 BTM_BLE_ADVERT_CHNL_39 = (0x01 << 2) /**< ADV channel */ 186 }; 187 typedef uint8_t wiced_bt_ble_advert_chnl_map_t; /**< BLE advertisement channel map (see #wiced_bt_ble_advert_chnl_map_e) */ 188 189 /** Advertising settings */ 190 /** 191 * @note: Refer to valid ranges for the min and max intervals in the Core Specification 5.2, 7.8.5 LE Set Advertising Parameters command of the 192 * Host Controller Interface Functional Specification 193 */ 194 typedef struct 195 { 196 wiced_bt_ble_advert_chnl_map_t channel_map; /**< Advertising channel map (mask of #BTM_BLE_ADVERT_CHNL_37, #BTM_BLE_ADVERT_CHNL_38, #BTM_BLE_ADVERT_CHNL_39) */ 197 198 uint16_t high_duty_min_interval; /**< High duty undirected connectable advert minimum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_ADV_MIN_INTERVAL) */ 199 uint16_t high_duty_max_interval; /**< High duty undirected connectable advert maximum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_ADV_MAX_INTERVAL) */ 200 uint16_t high_duty_duration; /**< High duty advertising duration in seconds (0 for infinite) */ 201 202 uint16_t low_duty_min_interval; /**< Low duty undirected connectable advert minimum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_ADV_MIN_INTERVAL) */ 203 uint16_t low_duty_max_interval; /**< Low duty undirected connectable advert maximum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_ADV_MAX_INTERVAL) */ 204 uint16_t low_duty_duration; /**< Low duty advertising duration in seconds (0 for infinite) */ 205 206 uint16_t high_duty_directed_min_interval; /**< high duty directed adv minimum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_DIRECTED_ADV_MIN_INTERVAL) */ 207 uint16_t high_duty_directed_max_interval; /**< high duty directed adv maximum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_DIRECTED_ADV_MAX_INTERVAL) */ 208 209 uint16_t low_duty_directed_min_interval; /**< Low duty directed adv minimum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_DIRECTED_ADV_MIN_INTERVAL) */ 210 uint16_t low_duty_directed_max_interval; /**< Low duty directed adv maximum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_DIRECTED_ADV_MAX_INTERVAL) */ 211 uint16_t low_duty_directed_duration; /**< Low duty directed advertising duration in seconds (0 for infinite) */ 212 213 uint16_t high_duty_nonconn_min_interval; /**< High duty non-connectable adv minimum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_NONCONN_ADV_MIN_INTERVAL) */ 214 uint16_t high_duty_nonconn_max_interval; /**< High duty non-connectable adv maximum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_HIGH_DUTY_NONCONN_ADV_MAX_INTERVAL) */ 215 uint16_t high_duty_nonconn_duration; /**< High duty non-connectable advertising duration in seconds (0 for infinite) */ 216 217 uint16_t low_duty_nonconn_min_interval; /**< Low duty non-connectable adv minimum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_NONCONN_ADV_MIN_INTERVAL) */ 218 uint16_t low_duty_nonconn_max_interval; /**< Low duty non-connectable adv maximum advertising interval (in slots (1 slot = 0.625 ms)) (default: #WICED_BT_CFG_DEFAULT_LOW_DUTY_NONCONN_ADV_MAX_INTERVAL) */ 219 uint16_t low_duty_nonconn_duration; /**< Low duty non-connectable advertising duration in seconds (0 for infinite) */ 220 221 } wiced_bt_cfg_ble_advert_settings_t; 222 223 typedef uint16_t wiced_bt_gatt_appearance_t; /**< GATT appearance (see gatt_appearance_e in gattdefs.h) */ 224 225 /** GATT settings */ 226 typedef struct 227 { 228 uint8_t max_db_service_modules; /**< Maximum number of GATT database segments to be added into the GATT DB 229 * @note: Should be set to 0 for most applications which do not update the GATT DB after invocation of 230 * \ref wiced_bt_gatt_db_init 231 */ 232 uint8_t max_eatt_bearers; /**< Maximum number of allowed EATT bearers 233 * @note: Should be set to 0, for applications which support only legacy bearers. 234 */ 235 } wiced_bt_cfg_gatt_t; 236 237 /** Audio/Video Distribution configuration */ 238 typedef struct 239 { 240 uint8_t max_links; /**< Maximum simultaneous audio/video links over AVDT 241 @note: This shall be <= \ref wiced_bt_cfg_br_t.br_max_simultaneous_links; 242 */ 243 uint8_t max_seps; /**< Maximum number of stream end points */ 244 } wiced_bt_cfg_avdt_t; 245 246 /** Audio/Video Remote Control configuration */ 247 typedef struct 248 { 249 uint8_t max_links; /**< Maximum simultaneous remote control links over AVRC 250 @note: This shall be <= \ref wiced_bt_cfg_br_t.br_max_simultaneous_links; 251 */ 252 } wiced_bt_cfg_avrc_t; 253 254 255 /** RFCOMM configuration */ 256 typedef struct 257 { 258 uint8_t max_links; /**< Maximum number of simultaneous connected remote devices over RFCOMM 259 @note: This shall be <= \ref wiced_bt_cfg_br_t.br_max_simultaneous_links; 260 */ 261 uint8_t max_ports; /**< Maximum number of simultaneous RFCOMM ports */ 262 } wiced_bt_cfg_rfcomm_t; 263 264 /** Ischoronous Connection configuration settings */ 265 typedef struct 266 { 267 uint16_t max_sdu_size; /**< Max SDU size */ 268 uint8_t channel_count; /**< maximum number of audio channels per packet (left, right, etc.,) */ 269 uint8_t max_cis_conn; /**< Max Number of CIS connections */ 270 uint8_t max_cig_count; /**< Max Number of CIG connections */ 271 uint8_t max_buffers_per_cis; /**< Max Number of buffers per CIS */ 272 uint8_t max_big_count; /**< Max Number of BIG connections */ 273 } wiced_bt_cfg_isoc_t; 274 275 /** BR/EDR configuration settings */ 276 typedef struct { 277 uint8_t br_max_simultaneous_links; /**< Max number for simultaneous connections for a layer, profile, protocol */ 278 uint16_t br_max_rx_pdu_size; /**< Maximum size allowed for any received L2CAP PDU 279 * Minimum value - 48 280 * Maximum GATT MTU over legacy bearers shall be set to <= this value 281 * Maximum MPS for EATT channels shall be set to <= this value 282 */ 283 wiced_bt_dev_class_t device_class; /**< Local device class */ 284 wiced_bt_cfg_rfcomm_t rfcomm_cfg; /**< RFCOMM settings */ 285 wiced_bt_cfg_avdt_t avdt_cfg; /**< Audio/Video Distribution configuration */ 286 wiced_bt_cfg_avrc_t avrc_cfg; /**< Audio/Video Remote Control configuration */ 287 }wiced_bt_cfg_br_t; 288 289 /** BLE configuration settings */ 290 typedef struct { 291 uint8_t ble_max_simultaneous_links; /**< Max number for simultaneous connections for a layer, profile, protocol */ 292 uint16_t ble_max_rx_pdu_size; /**< Maximum size allowed for any received L2CAP PDU 293 * Minimum value - 65 (to support SM) 294 * Maximum GATT MTU over legacy bearers shall be set to <= this value 295 * Maximum MPS for EATT channels shall be set to <= this value 296 */ 297 wiced_bt_gatt_appearance_t appearance; /**< Device appearance to be sent out during advertising */ 298 299 uint16_t rpa_refresh_timeout; /**< Interval of random address refreshing - secs. The timeout value cannot be more than 1 hr = 3600s 300 * 301 * @note BLE Privacy is disabled if the value is 0. 302 */ 303 uint16_t host_addr_resolution_db_size; /**< addr resolution db size */ 304 305 const wiced_bt_cfg_ble_scan_settings_t *p_ble_scan_cfg; /**< BLE scan settings */ 306 const wiced_bt_cfg_ble_advert_settings_t *p_ble_advert_cfg; /**< BLE advertisement settings */ 307 int8_t default_ble_power_level; /**< Default LE power level, Refer lm_TxPwrTable table for the power range */ 308 }wiced_bt_cfg_ble_t; 309 310 /** Settings for application managed L2CAP protocols (optional) */ 311 typedef struct 312 { 313 uint8_t max_app_l2cap_psms; /**< Maximum number of application-managed PSMs */ 314 uint8_t max_app_l2cap_channels; /**< Maximum number of application-managed channels */ 315 316 uint8_t max_app_l2cap_le_fixed_channels; /**< Maximum number of application managed fixed channels supported. > */ 317 318 uint8_t max_app_l2cap_br_edr_ertm_chnls; /**< Maximum application ERTM channels, BR/EDR only */ 319 uint8_t max_app_l2cap_br_edr_ertm_tx_win; /**< Maximum application ERTM TX Window, BR/EDR only */ 320 } wiced_bt_cfg_l2cap_application_t; 321 322 /** Bluetooth stack configuration */ 323 typedef struct wiced_bt_cfg_settings_t_ 324 { 325 uint8_t *device_name; /**< Local device name (NULL terminated) */ 326 wiced_bt_sec_level_t security_required; /**< BTM_SEC_BEST_EFFORT is recommended choice for most applications, 327 to connect to the widest range of devices. Allows stack to choose 328 the highest level of security possible between the two devices */ 329 const wiced_bt_cfg_br_t *p_br_cfg; /**< BR/EDR related configuration */ 330 const wiced_bt_cfg_ble_t *p_ble_cfg; /**< BLE related configuration */ 331 const wiced_bt_cfg_gatt_t *p_gatt_cfg; /**< GATT settings */ 332 const wiced_bt_cfg_isoc_t *p_isoc_cfg; /**< Ischoronous Connection configuration */ 333 const wiced_bt_cfg_l2cap_application_t *p_l2cap_app_cfg; /**< l2cap configuration fgitor application defined profiles/protocols */ 334 } wiced_bt_cfg_settings_t; 335 336 /** 337 * Returns the expected dynamic memory size required for the stack based on the p_bt_cfg_settings 338 * 339 * @param[in] p_bt_cfg_settings : Bluetooth stack configuration 340 * 341 * @return dynamic memory size requirements of the stack 342 */ 343 int32_t wiced_bt_stack_get_dynamic_memory_size_for_config(const wiced_bt_cfg_settings_t* p_bt_cfg_settings); 344 345 346 #ifdef __cplusplus 347 } /* extern "C" */ 348 #endif 349 350 351 /**@} wiced_bt_cfg */ 352
