README.md
1| Supported Targets | ESP32-S3 |
2| ----------------- | -------- |
3
4# RTC power test
5
6This test app is to enter 7 different sub power modes we have, so that the power consumption under different power modes can be measured.
7
8Currently there are 6 sub power modes, 3 for deepsleep and 3 for lightsleep. Show as below (priority from high to low).
9
10## Deepsleep
111. Mode for ADC/Temp Sensor in monitor mode (ULP). To enable this mode, call `esp_sleep_enable_adc_tsens_monitor`.
122. Default mode.
133. Ultra low power mode. To enable this mode, call `rtc_sleep_enable_ultra_low`. Note if mode 1 has higher priority than this.
14
15## Lightsleep
161. Mode for using 40 MHz XTAL in lightsleep. To enable this mode, call `esp_sleep_pd_config(ESP_PD_DOMAIN_XTAL, ESP_PD_OPTION_ON)`.
172. Mode for using 8M clock by digital system (peripherals). To enable this mode, initialize LEDC with 8M clock source.
183. Mode for ADC/Temp Sensor in monitor mode (ULP). To enable this mdoe, call `esp_sleep_enable_adc_tsens_monitor`.
194. Default mode.
20
