1i2s_speed Test
2##################
3
4Board-specific details:
5
6MIMXRT1170_EVK:
7This board uses CONFIG_I2S_TEST_SEPARATE_DEVICES=y and connects two SAI peripherals by shorting
8signals externally on the EVK.  These are the HW changes required to run this test:
9	- Remove jumper J8 and resistor R78
10	- Short BCLK J9-pin1  (SAI1_RX_BCLK)  to J66-pin1  (SAI4_TX_BCLK)
11	- Short SYNC J9-pin5  (SAI1_RX_SYNC)  to J64-pin1  (SAI4_TX_SYNC)
12	- Short Data J61-pin1 (SAI1_RX_DATA)  to J63-pin1  (SAI4_TX_DATA)
13