1.. _semtech_sx1272mb2das: 2 3Semtech SX1272MB2DAS LoRa Shield 4################################ 5 6Overview 7******** 8 9The Semtech SX1272MB2DAS LoRa shield is an Arduino 10compatible shield based on the SX1272 LoRa transceiver 11from Semtech. 12 13More information about the shield can be found 14at the `mbed SX1272MB2xAS website`_. 15 16Pins Assignment of the Semtech SX1272MB2DAS LoRa Shield 17======================================================= 18 19+-----------------------+-----------------+ 20| Shield Connector Pin | Function | 21+=======================+=================+ 22| A0 | SX1272 RESET | 23+-----------------------+-----------------+ 24| D2 | SX1272 DIO0 | 25+-----------------------+-----------------+ 26| D3 | SX1272 DIO1 | 27+-----------------------+-----------------+ 28| D4 | SX1272 DIO2 | 29+-----------------------+-----------------+ 30| D5 | SX1272 DIO3 | 31+-----------------------+-----------------+ 32| D10 | SX1272 SPI NSS | 33+-----------------------+-----------------+ 34| D11 | SX1272 SPI MOSI | 35+-----------------------+-----------------+ 36| D12 | SX1272 SPI MISO | 37+-----------------------+-----------------+ 38| D13 | SX1272 SPI SCK | 39+-----------------------+-----------------+ 40 41The SX1272 signals DIO4 and DIO5 are not available at the shield connector. 42 43Requirements 44************ 45 46This shield can only be used with a board which provides a configuration 47for Arduino connectors and defines node aliases for SPI and GPIO interfaces 48(see :ref:`shields` for more details). 49 50Programming 51*********** 52 53Set ``-DSHIELD=semtech_sx1272mb2das`` when you invoke ``west build``. For 54example: 55 56.. zephyr-app-commands:: 57 :zephyr-app: samples/subsys/lorawan/class_a 58 :board: nucleo_f429zi 59 :shield: semtech_sx1272mb2das 60 :goals: build 61 62References 63********** 64 65.. target-notes:: 66 67.. _mbed SX1272MB2xAS website: 68 https://os.mbed.com/components/SX1272MB2xAS/ 69