1/*
2 * Copyright (c) 2020 Nordic Semiconductor ASA
3 *
4 * SPDX-License-Identifier: Apache-2.0
5 */
6
7/dts-v1/;
8#include <nordic/nrf5340_cpunet_qkaa.dtsi>
9#include "nrf5340dk_nrf5340_cpunet-pinctrl.dtsi"
10#include <zephyr/dt-bindings/input/input-event-codes.h>
11
12/ {
13	model = "Nordic NRF5340 DK NRF5340 Network";
14	compatible = "nordic,nrf5340-dk-nrf5340-cpunet";
15
16	chosen {
17		zephyr,console = &uart0;
18		zephyr,shell-uart = &uart0;
19		zephyr,uart-mcumgr = &uart0;
20		zephyr,bt-mon-uart = &uart0;
21		zephyr,bt-c2h-uart = &uart0;
22		zephyr,bt-hci-rpmsg-ipc = &ipc0;
23		nordic,802154-spinel-ipc = &ipc0;
24		zephyr,sram = &sram1;
25		zephyr,flash = &flash1;
26		zephyr,code-partition = &slot0_partition;
27		zephyr,ieee802154 = &ieee802154;
28	};
29
30	leds {
31		compatible = "gpio-leds";
32		led0: led_0 {
33			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
34			label = "Green LED 0";
35		};
36		led1: led_1 {
37			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
38			label = "Green LED 1";
39		};
40		led2: led_2 {
41			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
42			label = "Green LED 2";
43		};
44		led3: led_3 {
45			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
46			label = "Green LED 3";
47		};
48	};
49
50	buttons {
51		compatible = "gpio-keys";
52		button0: button_0 {
53			gpios = <&gpio0 23 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
54			label = "Push button 1";
55			zephyr,code = <INPUT_KEY_0>;
56		};
57		button1: button_1 {
58			gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
59			label = "Push button 2";
60			zephyr,code = <INPUT_KEY_1>;
61		};
62		button2: button_2 {
63			gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
64			label = "Push button 3";
65			zephyr,code = <INPUT_KEY_2>;
66		};
67		button3: button_3 {
68			gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
69			label = "Push button 4";
70			zephyr,code = <INPUT_KEY_3>;
71		};
72	};
73
74	arduino_header: connector {
75		compatible = "arduino-header-r3";
76		#gpio-cells = <2>;
77		gpio-map-mask = <0xffffffff 0xffffffc0>;
78		gpio-map-pass-thru = <0 0x3f>;
79		gpio-map = <0 0 &gpio0 4 0>,	/* A0 */
80			   <1 0 &gpio0 5 0>,	/* A1 */
81			   <2 0 &gpio0 6 0>,	/* A2 */
82			   <3 0 &gpio0 7 0>,	/* A3 */
83			   <4 0 &gpio0 25 0>,	/* A4 */
84			   <5 0 &gpio0 26 0>,	/* A5 */
85			   <6 0 &gpio1 0 0>,	/* D0 */
86			   <7 0 &gpio1 1 0>,	/* D1 */
87			   <8 0 &gpio1 4 0>,	/* D2 */
88			   <9 0 &gpio1 5 0>,	/* D3 */
89			   <10 0 &gpio1 6 0>,	/* D4 */
90			   <11 0 &gpio1 7 0>,	/* D5 */
91			   <12 0 &gpio1 8 0>,	/* D6 */
92			   <13 0 &gpio1 9 0>,	/* D7 */
93			   <14 0 &gpio1 10 0>,	/* D8 */
94			   <15 0 &gpio1 11 0>,	/* D9 */
95			   <16 0 &gpio1 12 0>,	/* D10 */
96			   <17 0 &gpio1 13 0>,	/* D11 */
97			   <18 0 &gpio1 14 0>,	/* D12 */
98			   <19 0 &gpio1 15 0>,	/* D13 */
99			   <20 0 &gpio1 2 0>,	/* D14 */
100			   <21 0 &gpio1 3 0>;	/* D15 */
101	};
102
103	/* These aliases are provided for compatibility with samples */
104	aliases {
105		led0 = &led0;
106		led1 = &led1;
107		led2 = &led2;
108		led3 = &led3;
109		sw0 = &button0;
110		sw1 = &button1;
111		sw2 = &button2;
112		sw3 = &button3;
113		bootloader-led0 = &led0;
114		mcuboot-button0 = &button0;
115		mcuboot-led0 = &led0;
116		watchdog0 = &wdt0;
117	};
118};
119
120&gpiote {
121	status = "okay";
122};
123
124&gpio0 {
125	status = "okay";
126};
127
128&gpio1 {
129	status = "okay";
130};
131
132&uart0 {
133	status = "okay";
134	current-speed = <115200>;
135	pinctrl-0 = <&uart0_default>;
136	pinctrl-1 = <&uart0_sleep>;
137	pinctrl-names = "default", "sleep";
138};
139
140arduino_serial: &uart0{};
141
142arduino_i2c: &i2c0 {
143	compatible = "nordic,nrf-twim";
144	/* Cannot be used together with uart0. */
145	/* status = "okay"; */
146	pinctrl-0 = <&i2c0_default>;
147	pinctrl-1 = <&i2c0_sleep>;
148	pinctrl-names = "default", "sleep";
149};
150
151arduino_spi: &spi0 {
152	compatible = "nordic,nrf-spim";
153	/* Cannot be used together with uart0. */
154	/* status = "okay"; */
155	cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>; /* D10 */
156	pinctrl-0 = <&spi0_default>;
157	pinctrl-1 = <&spi0_sleep>;
158	pinctrl-names = "default", "sleep";
159};
160
161&flash1 {
162
163	partitions {
164		compatible = "fixed-partitions";
165		#address-cells = <1>;
166		#size-cells = <1>;
167
168		boot_partition: partition@0 {
169			label = "mcuboot";
170			reg = <0x00000000 0xc000>;
171		};
172		slot0_partition: partition@c000 {
173			label = "image-0";
174			reg = <0x0000C000 0x17000>;
175		};
176		slot1_partition: partition@23000 {
177			label = "image-1";
178			reg = <0x00023000 0x17000>;
179		};
180		storage_partition: partition@3a000 {
181			label = "storage";
182			reg = <0x0003a000 0x6000>;
183		};
184	};
185};
186
187&ieee802154 {
188	status = "okay";
189};
190
191/* Include shared RAM configuration file */
192#include "nrf5340_shared_sram_planning_conf.dtsi"
193