Searched refs:needs (Results 1 – 25 of 523) sorted by relevance
12345678910>>...21
16 # Note: AndeStar V5 DSP needs custom Andes V5 toolchain21 # Note: AndeStar V5 EXEC.IT needs custom Andes V5 toolchain
4 # The GICv3 & ITS drivers allocation needs are:15 # 256bytes aligned tables, for reference a 32 ITEs table needs 256bytes.
13 It needs the BabbleSim simulator both in compile time and to execute24 It needs the BabbleSim simulator both in compile time and to execute35 It needs the BabbleSim simulator both in compile time and to execute46 It needs the BabbleSim simulator both in compile time and to execute
27 Change default value when platform needs different data alignment.33 Change default value when platform needs a different time.
10 existing network interface. Application needs to attach the IPIP12 Also application needs to setup IP addresses etc. to the IP-to-IP
9 * need USB but needs an extra MPU region which
10 # MEMC needs to be enabled in order to store
5 # needs to be considered by certain system initialization functionality
11 needs to be aware of size or base address of secondary image
6 # YAML needs to happen after cmake has completed processing.30 # Remove unused temporary files. JSON_FILE needs to be kept, or the
6 # needs to be considered by certain system initialization functionality
15 # ESP32 DMA needs 32 bit aligned buffers
15 /* GT911 IRQ GPIO is active low on this board, and needs probing mode */
26 # ISN needs CS-Rand which isn't supported upstream for nRF boards
13 # wakeup by default. It needs to be disabled here, because the USB nrfx
32 Even if VLAN is enabled in a :file:`prj.conf` file, the VLAN needs to be34 :c:func:`net_eth_vlan_enable` function to do that. The application needs37 :c:func:`net_eth_vlan_disable` function. The application needs to configure
