| /Zephyr-latest/boards/common/ |
| D | esp32.board.cmake | 6 board_runner_args(openocd --no-init --no-halt --no-targets --no-load)
7 board_runner_args(openocd --gdb-init "set remote hardware-watchpoint-limit 2")
9 board_runner_args(openocd --gdb-init "maintenance flush register-cache")
10 board_runner_args(openocd --gdb-init "mon reset halt")
11 board_runner_args(openocd --gdb-init "thb main")
|
| /Zephyr-latest/samples/drivers/i2s/echo/src/ |
| D | codec.c | 22 static const uint8_t init[][2] = { in init_wm8731_i2c() local
110 for (int i = 0; i < ARRAY_SIZE(init); ++i) { in init_wm8731_i2c()
111 const uint8_t *entry = init[i]; in init_wm8731_i2c()
|
| /Zephyr-latest/drivers/memc/ |
| D | memc_stm32_nor_psram.c | 23 FMC_NORSRAM_InitTypeDef init; member
45 memcpy(&hnor.Init, &bank_config->init, sizeof(hnor.Init)); in memc_stm32_nor_init()
47 if (bank_config->init.ExtendedMode == FMC_EXTENDED_MODE_ENABLE) { in memc_stm32_nor_init()
71 memcpy(&hsram.Init, &bank_config->init, sizeof(hsram.Init)); in memc_stm32_psram_init()
73 if (bank_config->init.ExtendedMode == FMC_EXTENDED_MODE_ENABLE) { in memc_stm32_psram_init()
96 memory_type = config->banks[bank_idx].init.MemoryType; in memc_stm32_nor_psram_init()
115 memory_type, config->banks[bank_idx].init.NSBank, ret); in memc_stm32_nor_psram_init()
126 { .init = { \
|
| /Zephyr-latest/boards/witte/linum/support/ |
| D | openocd.cfg | 16 # to reset halt just after openocd init.
17 rename init old_init
18 proc init {} {
|
| /Zephyr-latest/boards/st/nucleo_h743zi/support/ |
| D | openocd.cfg | 16 # to reset halt just after openocd init.
17 rename init old_init
18 proc init {} {
|
| /Zephyr-latest/boards/st/nucleo_h753zi/support/ |
| D | openocd.cfg | 16 # to reset halt just after openocd init.
17 rename init old_init
18 proc init {} {
|
| /Zephyr-latest/include/zephyr/mgmt/mcumgr/mgmt/ |
| D | handlers.h | 31 const mcumgr_handler_init_t init; member
45 .init = _init, \
|
| /Zephyr-latest/boards/st/stm32h573i_dk/support/ |
| D | openocd.cfg | 18 # to reset halt just after openocd init.
19 rename init old_init
20 proc init {} {
|
| /Zephyr-latest/boards/st/nucleo_h503rb/support/ |
| D | openocd.cfg | 18 # to reset halt just after openocd init.
19 rename init old_init
20 proc init {} {
|
| /Zephyr-latest/boards/st/nucleo_h533re/support/ |
| D | openocd.cfg | 18 # to reset halt just after openocd init.
19 rename init old_init
20 proc init {} {
|
| /Zephyr-latest/boards/st/nucleo_h563zi/support/ |
| D | openocd.cfg | 18 # to reset halt just after openocd init.
19 rename init old_init
20 proc init {} {
|
| /Zephyr-latest/subsys/tracing/include/ |
| D | tracing_backend.h | 31 void (*init)(void); member
64 if (backend && backend->api && backend->api->init) { in tracing_backend_init()
65 backend->api->init(); in tracing_backend_init()
|
| /Zephyr-latest/boards/st/stm32h747i_disco/support/ |
| D | openocd_stm32h747i_disco_m7.cfg | 23 # to reset halt just after openocd init.
24 rename init old_init
25 proc init {} {
|
| /Zephyr-latest/boards/arduino/giga_r1/support/ |
| D | openocd_arduino_giga_r1_m7.cfg | 23 # to reset halt just after openocd init.
24 rename init old_init
25 proc init {} {
|
| /Zephyr-latest/boards/arduino/nicla_vision/support/ |
| D | openocd_arduino_nicla_vision_m7.cfg | 23 # to reset halt just after openocd init.
24 rename init old_init
25 proc init {} {
|
| /Zephyr-latest/boards/arduino/opta/support/ |
| D | openocd_opta_stm32h747xx_m7.cfg | 23 # to reset halt just after openocd init.
24 rename init old_init
25 proc init {} {
|
| /Zephyr-latest/drivers/regulator/ |
| D | Kconfig.max20335 | 16 int "MAX20335 regulator driver init priority (common part)"
20 (common part). It must be greater than I2C and MFD init priority.
23 int "MAX20335 regulator driver init priority"
|
| D | Kconfig.npm1300 | 16 int "nPM1300 regulator driver init priority (common part)"
20 It must be greater than I2C init priority.
23 int "nPM1300 regulator driver init priority"
|
| D | Kconfig.npm2100 | 16 int "nPM2100 regulator driver init priority (common part)"
20 It must be greater than I2C init priority.
23 int "nPM2100 regulator driver init priority"
|
| D | Kconfig.pca9420 | 15 int "NXP PCA9420 regulator driver init priority (common part)"
19 must be greater than I2C init priority.
22 int "NXP PCA9420 regulator driver init priority"
|
| /Zephyr-latest/boards/vcc-gnd/yd_stm32h750vb/support/ |
| D | openocd.cfg | 25 # to reset halt just after openocd init.
26 rename init old_init
27 proc init {} {
|
| /Zephyr-latest/boards/st/nucleo_h745zi_q/support/ |
| D | openocd.cfg | 24 # to reset halt just after openocd init.
25 rename init old_init
26 proc init {} {
|
| /Zephyr-latest/boards/st/nucleo_h7a3zi_q/support/ |
| D | openocd.cfg | 25 # to reset halt just after openocd init.
26 rename init old_init
27 proc init {} {
|
| /Zephyr-latest/boards/st/stm32h735g_disco/support/ |
| D | openocd.cfg | 25 # to reset halt just after openocd init.
26 rename init old_init
27 proc init {} {
|
| /Zephyr-latest/boards/st/stm32h750b_dk/support/ |
| D | openocd.cfg | 25 # to reset halt just after openocd init.
26 rename init old_init
27 proc init {} {
|
