Searched refs:chips (Results 1 – 25 of 52) sorted by relevance
123
18 Enable this to support auto detection of ISSI chips if chip vendor not directly20 chips, however will extend detecting time.26 Enable this to support auto detection of MXIC chips if chip vendor not directly28 chips, however will extend detecting time.34 Enable this to support auto detection of GD (GigaDevice) chips if chip vendor not39 This adds support for variant chips, however will extend detecting time and image40 size. Note that the default chip driver supports the GD chips with product ID47 Enable this to support auto detection of Winbond chips if chip vendor not directly49 chips, however will extend detecting time.55 Enable this to support auto detection of BOYA chips if chip vendor not directly[all …]
14 chips.23 Gecko chips.
10 # the following config is required to support chips of revision 1
11 SiWx91x chips.
10 Enable driver for SMSC/LAN91x family of chips.
9 Enable driver for SMSC/LAN911x/9220 family of chips.
10 Enable Ethernet driver for Silicon Labs Gecko chips.
13 This driver can handle several instances of AT45 family chips that20 in those chips and at initialization configures them to work in
15 chips.
62 most typical NOR flash chips to erase a sector.
5 bool "IRQ_STEER interrupt controller for NXP chips"
11 # for boards with different flash chips. If you flash this FCB
63 The pins for the SPI transceiver are not exposed from the chips64 and no need for user to confiugre them. But the chips design the
9 Enable clock management on Silicon Labs SiWx91x chips. This driver
9 devices. A 2.5" drive and two chips are embedded: an ASMedia ASM1153 USB-to-SATA11 while the latter is dedicated to the LED effects. The two chips are connected21 MCU. The two chips are connected together using I2C.
69 There are chips e.g. STM32WBAX family that use LPTIM as a system timer,70 but LPTIM is not clocked in standby mode. These chips usually have
25 the Read-Modify-Write functionality of DataFlash chips and does not perform35 AT45 family chips by just providing a corresponding overlay file.97 of AT45 family chips but only the one labeled "DATAFLASH_1" is required
56 https://wiznet.io/products/iethernet-chips/w5500
7 SSD and two chips are embedded: an ASMedia ASM2364 USB-to-PCIe bridge controller9 the latter is dedicated to the LED effects. The two chips are connected together
67 https://wiznet.io/products/iethernet-chips/w5500
106 I2C is mainly used to manage and power-on some onboard chips on the S4 Spider board.188 …https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/rtp8a779f0…191 …https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/r-car-s4-a…
9 and can be used on various FPGA chips.25 that target multiple chips of different vendors.35 The implementation is optimized for FPGA chips.
163 I2C is mainly used to manage and power on multiple of onboard chips on the H3ULCB and Kingfisher da…252 …https://www.renesas.com/br/en/products/automotive-products/automotive-system-chips-socs/r-car-h3-m…255 …https://www.renesas.com/eu/en/products/automotive-products/automotive-system-chips-socs/r-car-h3-h…
41 proceed to load code from flash. Some flash chips need sufficient
154 Refer to the :ref:`nordic_segger` page to learn about debugging Nordic chips with a
