Searched refs:flash (Results 501 – 525 of 2906) sorted by relevance
1...<<21222324252627282930>>...117
16 - STM32LDISCOVERY targets STM32L152RBT6, with 128K flash, 16K RAM, 4K EEPROM17 - STM32L152CDISCOVERY targets STM32L152RCT6, with 256K flash, 32K RAM, 8K EEPROM97 so its :ref:`installation <stm32cubeprog-flash-host-tools>` is required.99 Alternatively, OpenOCD or JLink can also be used to flash the board using104 $ west flash --runner openocd105 $ west flash --runner jlink115 :goals: build flash
24 # Work-area is a space in RAM used for flash programming51 # ENE internal spi flash52 flash bank ispif eneispif 0x60000000 0 0 0 $_TARGETNAME 0x50101000
13 "update your flash configuration or device configuration data blocks")18 # Include flash configuration block for RT1020 EVK from NXP's HAL.19 # This configuration block may need modification if another flash chip is
13 "update your flash configuration or device configuration data blocks")18 # Include flash configuration block for RT1024 EVK from NXP's HAL.19 # This configuration block may need modification if another flash chip is
4 DT_CHOSEN_Z_FLASH := zephyr,flash40 the flash API.
17 Build and flash as follows, replacing ``stm32f3_disco`` with your board:22 :goals: build flash
16 Build and flash Twinkie as follows:21 :goals: build flash
44 self.flash()46 def flash(self): member in TeensyBinaryRunner
9 message(FATAL_ERROR "Please specify a board flash variant for the mimxrt1050_evk:\n"19 board_runner_args(linkserver "--override=/device/memory/3/flash-driver=MIMXRT1050_SFDP_QSPI.cfx")
24 bool "Add MPU access to write to flash"26 Enable this to allow MPU RWX access to flash memory
22 flash-controller@40022000 {23 flash0: flash@8000000 {
7 HardKernel. It features a custom ESP32-WROVER with 16 MB flash and it operates109 The sysbuild makes possible to build and flash all necessary images needed to143 With ``--sysbuild`` option the bootloader will be re-build and re-flash151 During the development cycle, it is intended to build & flash as quickly possible.159 Remember that bootloader (MCUboot) needs to be flash at least once.161 Build and flash applications as usual (see :ref:`build_an_application` and169 The usual ``flash`` target will work with the ``odroid_go`` board176 :goals: flash208 :goals: build flash
11 embedded SRAM, 4 Mbytes of embedded flash memory, and rich graphics features,20 interface and capacitive touch panel, USB Type-C® HS, Octo-SPI flash memory21 device, Hexadeca-SPI PSRAM memory device, eMMC flash memory device,96 This probe allows to flash and debug the board using various tools.102 so its :ref:`installation <stm32cubeprog-flash-host-tools>` is required.104 Alternatively, OpenOCD can also be used to flash the board using109 $ west flash --runner openocd122 Then, build and flash in the usual way. Here is an example for the128 :goals: build flash
10 # Get flash size to use in esptool as string55 board_runner_args(esp32 "--esp-flash-size=${esptoolpy_flashsize}MB")56 board_runner_args(esp32 "--esp-flash-freq=${CONFIG_ESPTOOLPY_FLASHFREQ}")57 board_runner_args(esp32 "--esp-flash-mode=${CONFIG_ESPTOOLPY_FLASHMODE}")
2 :name: JESD216 flash5 Use the JESD216 flash API to extract information from a compatible serial memory device.10 This sample demonstrates how to use the JESD216 flash API to extract24 :goals: build flash
59 :goals: build flash64 The default runner tries to flash the board via an external programmer using openocd.65 To flash via the USB port, select the DFU runner when flashing:69 west flash --runner dfu-util
12 - AES-XTS-256-based flash encryption50 Build and flash applications as usual (see :ref:`build_an_application` and58 The usual ``flash`` target will work with the ``esp32s2_lolin_mini`` board68 :goals: flash
74 zephyr,flash = &flash;75 zephyr,flash-controller = &flash_mspi;94 &flash {
7 board equipped with 4MiB flash storage, a PWM enabled RGB led and 6 I/O pins.15 - 256 KiB flash memory and 32 KiB of RAM16 - Extra 4MiB SPI flash memory73 :goals: flash
22 # No flash configuration block exists for the RT1060 with HyperFlash in30 "update your flash configuration or device configuration data blocks")38 # Include flash configuration block for RT1060 EVK from NXP's HAL.39 # This configuration block may need modification if another flash chip is
21 zephyr,flash = &flash0;85 /* Winbond external flash */86 w25q64jvssiq_qspi: qspi-nor-flash@0 {110 w25q64jvssiq_spi: spi-nor-flash@0 {
14 zephyr,flash = &flash0;18 zephyr,flash-controller = &flash;85 /* Set 16KB of storage at the end of the 2000KB of flash */
11 - Up to 2 MB of flash memory for code/data34 Build the Zephyr kernel and application, then flash it to the device:39 :goals: flash42 ``west flash`` requires `SEGGER J-Link software`_ and `pylink`_ Python module
14 zephyr,flash = &flash0;18 zephyr,flash-controller = &flash;130 /* Set 16KB of storage at the end of the 1952KB of flash */
14 zephyr,flash = &flash0;18 zephyr,flash-controller = &flash;141 /* Set 16KB of storage at the end of the 1952KB of flash */
