1 /* 2 * Copyright (c) 2021 Laird Connectivity. All rights reserved. 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 #ifndef BL5340_BOARD_H__ 18 #define BL5340_BOARD_H__ 19 20 #include <hal/nrf_gpio.h> 21 22 #define TWI_INSTANCE_NUMBER 2 /* TWI instance number, cannot be 0 or 1 due to UART usage */ 23 #define TWI_FREQUENCY NRF_TWIM_FREQ_400K /* Speed to operate I2C (TWI) at */ 24 25 #define PORT_EXPANDER_I2C_ADDRESS (0x70) 26 #define PORT_EXPANDER_IO_CONFIG (0x0f) /* IOs 0-3 are input (buttons) and IOs 4-7 are output (LEDs) */ 27 28 #define PORT_EXPANDER_INTERRUPT_PIN (38UL) 29 #define PORT_EXPANDER_INTERRUPT_ACTIVE_LEVEL (0UL) 30 #define PORT_EXPANDER_INTERRUPT_PULL (NRF_GPIO_PIN_NOPULL) 31 32 #define PORT_EXPANDER_BUTTON1_IO (0x1) 33 #define PORT_EXPANDER_BUTTON1_ACTIVE_LEVEL (0x0) /* Corrisponding comparison of above value if button is pressed */ 34 35 #define PORT_EXPANDER_LED1_IO (0x10) 36 #define PORT_EXPANDER_LED1_ACTIVE_LEVEL (0x0) /* Corrisponding comparison of above value if LED is active */ 37 38 #endif // BL5340_BOARD_H__ 39
