| /hostap-latest/wpa_supplicant/ |
| D | README-P2P | 84 full scan. When the type parameter is not included (i.e., full scan), the
85 optional freq parameter can be used to override the first scan to use only
89 search for. The optional delay parameter can be used to request an extra
118 other devices). Optional parameter can be used to specify the duration
144 The optional "join" parameter can be used to indicate that this command
147 parameter can be used to request wpa_supplicant to automatically figure
160 The <pbc|pin|PIN#> parameter specifies the WPS provisioning
167 parameter can be used to request a persistent group to be formed. The
286 group interface is used as a parameter for this command.
477 single parameter: identifier for the pending query (the value returned
[all …]
|
| D | README-WPS | 69 The following parameter can be used to enable support for NFC config
131 interface, an optional timeout parameter can be used to specify
249 - the optional IP address parameter can be used to filter operations only
335 hexdump of the current AP configuration (WPS parameter requests this to
336 include only the WPS attributes; NDEF parameter requests additional NDEF
357 an AP) using a special value "nfc-pw" in place of the PIN parameter. If
380 reporting completed NFC connection handover. The first parameter
388 command is a hexdump of the selected AP configuration (WPS parameter
389 requests this to include only the WPS attributes; NDEF parameter
|
| D | ChangeLog | 130 * fixed a regression in WMM parameter configuration for a TDLS peer
174 (CONFIG_OCV=y and network profile parameter ocv=1)
235 (gas_rand_mac_addr parameter)
242 (group_mgmt network profile parameter)
304 - use ieee80211w profile parameter to enable/disable PMF and derive
366 - allow specific TLS versions to be disabled with phase2 parameter
378 (tls_ext_cert_check=1 in the network profile phase1 parameter)
408 * started to ignore pmf=1/2 parameter for non-RSN networks
409 * added wps_disabled=1 network profile parameter to allow AP mode to
414 - add gas_address3 configuration parameter to control Address 3
[all …]
|
| D | README-NAN-USD | 31 If ttl=0 or the parameter is not included, only one Publish message is
61 If ttl=0 or the parameter is not included, operation is terminated once
|
| D | notify.c | 894 const char *parameter) in wpas_notify_eap_status() argument
896 wpas_dbus_signal_eap_status(wpa_s, status, parameter); in wpas_notify_eap_status()
899 status, parameter); in wpas_notify_eap_status()
|
| D | README-HS20 | 44 can be changed with the auto_interworking=1 parameter to perform network
206 # parameter. When using Home OIs to match the network, the EAP parameters
225 # alternative to the use of the realm parameter. When using Roaming
251 # This optional field is used with like the 'eap' parameter.
254 # This optional field is used with like the 'eap' parameter.
451 parameter (1 is higher priority than 0).
|
| D | notify.h | 146 const char *parameter);
|
| D | android.config | 342 # (see load_dynamic_eap parameter in the example file) before being used in
525 # operations for roaming within an ESS (same SSID). See the bgscan parameter in
541 # release under this optional build parameter. This functionality is subject to
|
| D | README-DPP | 106 (Returns bootstrapping info id. If the key parameter is not included, a new key
|
| D | defconfig | 388 # (see load_dynamic_eap parameter in the example file) before being used in
632 # operations for roaming within an ESS (same SSID). See the bgscan parameter in
656 # release under this optional build parameter. This functionality is subject to
|
| D | wpas_glue.c | 1107 const char *parameter) in wpa_supplicant_status_cb() argument
1111 wpas_notify_eap_status(wpa_s, status, parameter); in wpa_supplicant_status_cb()
|
| /hostap-latest/hostapd/ |
| D | README-WPS | 67 Following parameter can be used to enable support for NFC config method:
217 device) can be configured in hostapd.conf (ap_pin parameter). A more
230 - if the optional timeout parameter is given, the AP PIN will be enabled
238 - if the optional timeout parameter is given, the AP PIN will be enabled
321 of the current AP configuration (WPS parameter requests this to include
322 only the WPS attributes; NDEF parameter requests additional NDEF
349 connection handover. The first parameter indicates whether the local
|
| D | hlr_auc_gw.txt | 22 hostapd is configured to use hlr_auc_gw with the eap_sim_db parameter in
68 configured with the db parameter within the eap_sim_db configuration
|
| D | ChangeLog | 103 * added eap_sim_id parameter to allow EAP-SIM/AKA server pseudonym and
140 (CONFIG_OCV=y and configuration parameter ocv=1)
178 - replaced r0_key_lifetime (minutes) parameter with
227 * added no_probe_resp_if_max_sta=1 parameter to disable Probe Response
275 * added assocresp_elements parameter to allow vendor specific elements
281 - add gas_address3 configuration parameter to control Address 3
283 * added command line parameter -i to override interface parameter in
328 (openssl_ciphers parameter)
361 configured with acs_chan_bias parameter
428 * hs20_icon config parameter to configure icon files for OSU
[all …]
|
| D | defconfig | 394 # parameter. See that parameter in hostapd.conf for more details.
401 # release under this optional build parameter. This functionality is subject to
|
| D | android.config | 215 # release under this optional build parameter. This functionality is subject to
|
| /hostap-latest/doc/ |
| D | ctrl_iface.doxygen | 385 Start P2P device discovery. Optional parameter can be used to specify
423 The <pbc|pin|PIN#> parameter specifies the WPS provisioning
431 parameter can be used to request a persistent group to be formed.
441 The optional "go_intent" parameter can be used to override the default
447 Start Listen-only state. Optional parameter can be used to specify the
458 group interface is used as a parameter for this command.
504 single parameter: identifier for the pending query (the value returned
979 PIN displayed on the peer. The following parameter is included after
1036 Request. For persistent groups, the parameter after the event prefix
1046 requested with \ref ctrl_iface_P2P_INVITE. The parameter
|
| D | dbus.doxygen | 123 <p>Global wpa_supplicant debugging parameter. Determines if timestamps are shown in debug logs.</p>
128 <p>Global wpa_supplicant debugging parameter. Determines if secrets are shown in debug logs.</p>
405 <dd>Autoscan parameter line or empty to unset autoscan.</dd>
615 <p>Provide parameter requested by NetworkRequest().</p>
1316 <h3>EAP ( s : status, s : parameter )</h3>
1321 …ted", "accept proposed method", "remote certificate verification", "eap parameter needed", "comple…
1322 <dt>s : parameter</dt>
1329 <p>Request for network parameter. NetworkResponse() is used to provide the requested parameter.</p>
1440 …he interface will process the credentials (credentials_processed configuration file parameter).</p>
1587 …icates that this client has no special needs for GO presence. The first parameter pair gives the p…
|
| /hostap-latest/wpa_supplicant/dbus/ |
| D | dbus_new.h | 257 const char *status, const char *parameter);
590 const char *parameter) in wpas_dbus_signal_eap_status() argument
|
| /hostap-latest/src/eap_peer/ |
| D | eap.h | 242 const char *parameter);
|
| /hostap-latest/wpa_supplicant/doc/docbook/ |
| D | wpa_cli.sgml | 53 allow non-root user access (ctrl_interface GROUP= parameter in the
63 including the command as a command line parameter. Commands are
|
| D | wpa_supplicant.sgml | 431 <para>Override the driver parameter for new
439 <para>Override the ctrl_interface parameter for new
|
| /hostap-latest/src/eapol_supp/ |
| D | eapol_supp_sm.h | 275 const char *parameter);
|
| D | eapol_supp_sm.c | 2036 const char *parameter) in eapol_sm_notify_status() argument
2041 sm->ctx->status_cb(sm->ctx->ctx, status, parameter); in eapol_sm_notify_status()
|
| /hostap-latest/src/pae/ |
| D | ieee802_1x_kay_i.h | 66 u8 parameter[4]; member
|
