1# Test cases for automatic channel selection with hostapd 2# Copyright (c) 2013-2018, Jouni Malinen <j@w1.fi> 3# 4# This software may be distributed under the terms of the BSD license. 5# See README for more details. 6 7import logging 8logger = logging.getLogger() 9import time 10 11import hostapd 12from utils import * 13from test_dfs import wait_dfs_event 14 15def force_prev_ap_on_24g(ap): 16 # For now, make sure the last operating channel was on 2.4 GHz band to get 17 # sufficient survey data from mac80211_hwsim. 18 hostapd.add_ap(ap, {"ssid": "open"}) 19 time.sleep(0.1) 20 hostapd.remove_bss(ap) 21 22def force_prev_ap_on_5g(ap): 23 # For now, make sure the last operating channel was on 5 GHz band to get 24 # sufficient survey data from mac80211_hwsim. 25 hostapd.add_ap(ap, {"ssid": "open", "hw_mode": "a", 26 "channel": "36", "country_code": "US"}) 27 time.sleep(0.1) 28 hostapd.remove_bss(ap) 29 30def wait_acs(hapd, return_after_acs=False): 31 ev = hapd.wait_event(["ACS-STARTED", "ACS-COMPLETED", "ACS-FAILED", 32 "AP-ENABLED", "AP-DISABLED"], timeout=5) 33 if not ev: 34 raise Exception("ACS start timed out") 35 if "ACS-STARTED" not in ev: 36 raise Exception("Unexpected ACS event: " + ev) 37 38 state = hapd.get_status_field("state") 39 if state != "ACS": 40 raise Exception("Unexpected interface state %s (expected ACS)" % state) 41 42 ev = hapd.wait_event(["ACS-COMPLETED", "ACS-FAILED", "AP-ENABLED", 43 "AP-DISABLED"], timeout=20) 44 if not ev: 45 raise Exception("ACS timed out") 46 if "ACS-COMPLETED" not in ev: 47 raise Exception("Unexpected ACS event: " + ev) 48 49 if return_after_acs: 50 return 51 52 ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=5) 53 if not ev: 54 raise Exception("AP setup timed out") 55 if "AP-ENABLED" not in ev: 56 raise Exception("Unexpected ACS event: " + ev) 57 58 state = hapd.get_status_field("state") 59 if state != "ENABLED": 60 raise Exception("Unexpected interface state %s (expected ENABLED)" % state) 61 62def test_ap_acs(dev, apdev): 63 """Automatic channel selection""" 64 force_prev_ap_on_24g(apdev[0]) 65 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 66 params['channel'] = '0' 67 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 68 wait_acs(hapd) 69 70 freq = hapd.get_status_field("freq") 71 if int(freq) < 2400: 72 raise Exception("Unexpected frequency") 73 74 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 75 76def test_ap_acs_chanlist(dev, apdev): 77 """Automatic channel selection with chanlist set""" 78 force_prev_ap_on_24g(apdev[0]) 79 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 80 params['channel'] = '0' 81 params['chanlist'] = '1 6 11' 82 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 83 wait_acs(hapd) 84 85 freq = hapd.get_status_field("freq") 86 if int(freq) < 2400: 87 raise Exception("Unexpected frequency") 88 89 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 90 91def test_ap_acs_freqlist(dev, apdev): 92 """Automatic channel selection with freqlist set""" 93 run_ap_acs_freqlist(dev, apdev, [2412, 2437, 2462]) 94 95def test_ap_acs_freqlist2(dev, apdev): 96 """Automatic channel selection with freqlist set""" 97 run_ap_acs_freqlist(dev, apdev, [2417, 2432, 2457]) 98 99def run_ap_acs_freqlist(dev, apdev, freqlist): 100 force_prev_ap_on_24g(apdev[0]) 101 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 102 params['channel'] = '0' 103 params['freqlist'] = ','.join([str(x) for x in freqlist]) 104 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 105 wait_acs(hapd) 106 107 freq = int(hapd.get_status_field("freq")) 108 if freq not in freqlist: 109 raise Exception("Unexpected frequency: %d" % freq) 110 111 dev[0].connect("test-acs", psk="12345678", scan_freq=str(freq)) 112 113def test_ap_acs_invalid_chanlist(dev, apdev): 114 """Automatic channel selection with invalid chanlist""" 115 force_prev_ap_on_24g(apdev[0]) 116 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 117 params['channel'] = '0' 118 params['chanlist'] = '15-18' 119 hapd = hostapd.add_ap(apdev[0], params, no_enable=True) 120 res = hapd.request("ENABLE") 121 if "OK" in res: 122 raise Exception("ENABLE command succeeded unexpectedly") 123 124def test_ap_multi_bss_acs(dev, apdev): 125 """hostapd start with a multi-BSS configuration file using ACS""" 126 skip_with_fips(dev[0]) 127 check_sae_capab(dev[2]) 128 force_prev_ap_on_24g(apdev[0]) 129 130 # start the actual test 131 hapd = hostapd.add_iface(apdev[0], 'multi-bss-acs.conf') 132 hapd.enable() 133 wait_acs(hapd) 134 135 freq = hapd.get_status_field("freq") 136 if int(freq) < 2400: 137 raise Exception("Unexpected frequency") 138 139 dev[0].connect("bss-1", key_mgmt="NONE", scan_freq=freq) 140 dev[1].connect("bss-2", psk="12345678", scan_freq=freq) 141 dev[2].set("sae_groups", "") 142 dev[2].connect("bss-3", key_mgmt="SAE", psk="qwertyuiop", scan_freq=freq) 143 144def test_ap_acs_40mhz(dev, apdev): 145 """Automatic channel selection for 40 MHz channel""" 146 run_ap_acs_40mhz(dev, apdev, '[HT40+]') 147 148def test_ap_acs_40mhz_plus_or_minus(dev, apdev): 149 """Automatic channel selection for 40 MHz channel (plus or minus)""" 150 run_ap_acs_40mhz(dev, apdev, '[HT40+][HT40-]') 151 152def run_ap_acs_40mhz(dev, apdev, ht_capab): 153 clear_scan_cache(apdev[0]) 154 force_prev_ap_on_24g(apdev[0]) 155 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 156 params['channel'] = '0' 157 params['ht_capab'] = ht_capab 158 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 159 wait_acs(hapd) 160 161 freq = hapd.get_status_field("freq") 162 if int(freq) < 2400: 163 raise Exception("Unexpected frequency") 164 sec = hapd.get_status_field("secondary_channel") 165 if int(sec) == 0: 166 raise Exception("Secondary channel not set") 167 168 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 169 170def test_ap_acs_40mhz_minus(dev, apdev): 171 """Automatic channel selection for HT40- channel""" 172 clear_scan_cache(apdev[0]) 173 force_prev_ap_on_24g(apdev[0]) 174 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 175 params['channel'] = '0' 176 params['ht_capab'] = '[HT40-]' 177 params['acs_num_scans'] = '1' 178 params['chanlist'] = '1 11' 179 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 180 ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10) 181 if not ev: 182 raise Exception("ACS start timed out") 183 # HT40- is not currently supported in hostapd ACS, so do not try to connect 184 # or verify that this operation succeeded. 185 186def test_ap_acs_5ghz(dev, apdev): 187 """Automatic channel selection on 5 GHz""" 188 try: 189 hapd = None 190 force_prev_ap_on_5g(apdev[0]) 191 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 192 params['hw_mode'] = 'a' 193 params['channel'] = '0' 194 params['country_code'] = 'US' 195 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 196 wait_acs(hapd) 197 freq = hapd.get_status_field("freq") 198 if int(freq) < 5000: 199 raise Exception("Unexpected frequency") 200 201 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 202 dev[0].wait_regdom(country_ie=True) 203 finally: 204 clear_regdom(hapd, dev) 205 206def test_ap_acs_5ghz_40mhz(dev, apdev): 207 """Automatic channel selection on 5 GHz for 40 MHz channel""" 208 try: 209 hapd = None 210 force_prev_ap_on_5g(apdev[0]) 211 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 212 params['hw_mode'] = 'a' 213 params['channel'] = '0' 214 params['ht_capab'] = '[HT40+]' 215 params['country_code'] = 'US' 216 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 217 wait_acs(hapd) 218 freq = hapd.get_status_field("freq") 219 if int(freq) < 5000: 220 raise Exception("Unexpected frequency") 221 222 sec = hapd.get_status_field("secondary_channel") 223 if int(sec) == 0: 224 raise Exception("Secondary channel not set") 225 226 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 227 dev[0].wait_regdom(country_ie=True) 228 finally: 229 clear_regdom(hapd, dev) 230 231def test_ap_acs_vht(dev, apdev): 232 """Automatic channel selection for VHT""" 233 try: 234 hapd = None 235 force_prev_ap_on_5g(apdev[0]) 236 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 237 params['hw_mode'] = 'a' 238 params['channel'] = '0' 239 params['ht_capab'] = '[HT40+]' 240 params['country_code'] = 'US' 241 params['ieee80211ac'] = '1' 242 params['vht_oper_chwidth'] = '1' 243 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 244 wait_acs(hapd) 245 freq = hapd.get_status_field("freq") 246 if int(freq) < 5000: 247 raise Exception("Unexpected frequency") 248 249 sec = hapd.get_status_field("secondary_channel") 250 if int(sec) == 0: 251 raise Exception("Secondary channel not set") 252 253 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 254 dev[0].wait_regdom(country_ie=True) 255 finally: 256 clear_regdom(hapd, dev) 257 258def test_ap_acs_vht40(dev, apdev): 259 """Automatic channel selection for VHT40""" 260 try: 261 hapd = None 262 force_prev_ap_on_5g(apdev[0]) 263 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 264 params['hw_mode'] = 'a' 265 params['channel'] = '0' 266 params['ht_capab'] = '[HT40+]' 267 params['country_code'] = 'US' 268 params['ieee80211ac'] = '1' 269 params['vht_oper_chwidth'] = '0' 270 params['acs_num_scans'] = '1' 271 params['chanlist'] = '36 149' 272 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 273 wait_acs(hapd) 274 freq = hapd.get_status_field("freq") 275 if int(freq) < 5000: 276 raise Exception("Unexpected frequency") 277 278 sec = hapd.get_status_field("secondary_channel") 279 if int(sec) == 0: 280 raise Exception("Secondary channel not set") 281 282 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 283 dev[0].wait_regdom(country_ie=True) 284 finally: 285 clear_regdom(hapd, dev) 286 287def test_ap_acs_vht80p80(dev, apdev): 288 """Automatic channel selection for VHT 80+80""" 289 try: 290 hapd = None 291 force_prev_ap_on_5g(apdev[0]) 292 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 293 params['hw_mode'] = 'a' 294 params['channel'] = '0' 295 params['ht_capab'] = '[HT40+]' 296 params['country_code'] = 'US' 297 params['ieee80211ac'] = '1' 298 params['vht_oper_chwidth'] = '3' 299 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 300 ev = hapd.wait_event(["ACS-COMPLETED"], timeout=20) 301 if ev is None: 302 raise Exception("ACS did not complete") 303 # ACS for 80+80 is not yet supported, so the AP setup itself will fail. 304 # Do not try to connection before this gets fully supported. 305 ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10) 306 if ev is None: 307 raise Exception("AP enabled/disabled not reported") 308 finally: 309 clear_regdom(hapd, dev) 310 311def test_ap_acs_vht160(dev, apdev): 312 """Automatic channel selection for VHT160""" 313 try: 314 hapd = None 315 force_prev_ap_on_5g(apdev[0]) 316 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 317 params['hw_mode'] = 'a' 318 params['channel'] = '0' 319 params['ht_capab'] = '[HT40+]' 320 params['country_code'] = 'ZA' 321 params['ieee80211ac'] = '1' 322 params['vht_oper_chwidth'] = '2' 323 params['ieee80211d'] = '1' 324 params['ieee80211h'] = '1' 325 params['chanlist'] = '100' 326 params['acs_num_scans'] = '1' 327 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 328 ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10) 329 if not ev: 330 raise Exception("ACS start timed out") 331 # VHT160 is not currently supported in hostapd ACS, so do not try to 332 # enforce successful AP start. 333 if "AP-ENABLED" in ev: 334 freq = hapd.get_status_field("freq") 335 if int(freq) < 5000: 336 raise Exception("Unexpected frequency") 337 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 338 dev[0].wait_regdom(country_ie=True) 339 finally: 340 clear_regdom(hapd, dev) 341 342def test_ap_acs_vht160_scan_disable(dev, apdev): 343 """Automatic channel selection for VHT160 and DISABLE during scan""" 344 force_prev_ap_on_5g(apdev[0]) 345 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 346 params['hw_mode'] = 'a' 347 params['channel'] = '0' 348 params['ht_capab'] = '[HT40+]' 349 params['country_code'] = 'ZA' 350 params['ieee80211ac'] = '1' 351 params['vht_oper_chwidth'] = '2' 352 params["vht_oper_centr_freq_seg0_idx"] = "114" 353 params['ieee80211d'] = '1' 354 params['ieee80211h'] = '1' 355 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 356 time.sleep(3) 357 clear_regdom(hapd, dev) 358 359def test_ap_acs_bias(dev, apdev): 360 """Automatic channel selection with bias values""" 361 force_prev_ap_on_24g(apdev[0]) 362 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 363 params['channel'] = '0' 364 params['acs_chan_bias'] = '1:0.8 3:1.2 6:0.7 11:0.8' 365 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 366 wait_acs(hapd) 367 368 freq = hapd.get_status_field("freq") 369 if int(freq) < 2400: 370 raise Exception("Unexpected frequency") 371 372 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 373 374def test_ap_acs_survey(dev, apdev): 375 """Automatic channel selection using acs_survey parameter""" 376 force_prev_ap_on_24g(apdev[0]) 377 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 378 params['channel'] = 'acs_survey' 379 params['acs_num_scans'] = '1' 380 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 381 wait_acs(hapd) 382 383 freq = hapd.get_status_field("freq") 384 if int(freq) < 2400: 385 raise Exception("Unexpected frequency") 386 387 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 388 389def test_ap_acs_errors(dev, apdev): 390 """Automatic channel selection failures""" 391 clear_scan_cache(apdev[0]) 392 force_prev_ap_on_24g(apdev[0]) 393 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 394 params['channel'] = '0' 395 params['acs_num_scans'] = '2' 396 params['chanlist'] = '1' 397 hapd = hostapd.add_ap(apdev[0], params, no_enable=True) 398 399 with alloc_fail(hapd, 1, "acs_request_scan"): 400 if "FAIL" not in hapd.request("ENABLE"): 401 raise Exception("Unexpected success for ENABLE") 402 403 hapd.dump_monitor() 404 with fail_test(hapd, 1, "acs_request_scan"): 405 if "FAIL" not in hapd.request("ENABLE"): 406 raise Exception("Unexpected success for ENABLE") 407 408 hapd.dump_monitor() 409 with fail_test(hapd, 1, "acs_scan_complete"): 410 hapd.enable() 411 ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10) 412 if not ev: 413 raise Exception("ACS start timed out") 414 415 hapd.dump_monitor() 416 with fail_test(hapd, 1, "acs_request_scan;acs_scan_complete"): 417 hapd.enable() 418 ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10) 419 if not ev: 420 raise Exception("ACS start timed out") 421 422@long_duration_test 423def test_ap_acs_dfs(dev, apdev): 424 """Automatic channel selection, HT scan, and DFS""" 425 try: 426 hapd = None 427 force_prev_ap_on_5g(apdev[0]) 428 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 429 params['hw_mode'] = 'a' 430 params['channel'] = '0' 431 params['ht_capab'] = '[HT40+]' 432 params['country_code'] = 'US' 433 params['ieee80211d'] = '1' 434 params['ieee80211h'] = '1' 435 params['acs_num_scans'] = '1' 436 params['chanlist'] = '52 56 60 64' 437 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 438 wait_acs(hapd, return_after_acs=True) 439 440 wait_dfs_event(hapd, "DFS-CAC-START", 5) 441 ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70) 442 if "success=1" not in ev: 443 raise Exception("CAC failed") 444 445 ev = hapd.wait_event(["AP-ENABLED"], timeout=5) 446 if not ev: 447 raise Exception("AP setup timed out") 448 449 state = hapd.get_status_field("state") 450 if state != "ENABLED": 451 raise Exception("Unexpected interface state") 452 453 freq = int(hapd.get_status_field("freq")) 454 if freq not in [5260, 5280, 5300, 5320]: 455 raise Exception("Unexpected frequency: %d" % freq) 456 457 dev[0].connect("test-acs", psk="12345678", scan_freq=str(freq)) 458 dev[0].wait_regdom(country_ie=True) 459 finally: 460 if hapd: 461 hapd.request("DISABLE") 462 dev[0].disconnect_and_stop_scan() 463 hostapd.cmd_execute(apdev[0], ['iw', 'reg', 'set', '00']) 464 dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5) 465 dev[0].flush_scan_cache() 466 467def test_ap_acs_exclude_dfs(dev, apdev, params): 468 """Automatic channel selection, exclude DFS""" 469 try: 470 hapd = None 471 force_prev_ap_on_5g(apdev[0]) 472 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 473 params['hw_mode'] = 'a' 474 params['channel'] = '0' 475 params['ht_capab'] = '[HT40+]' 476 params['country_code'] = 'US' 477 params['ieee80211d'] = '1' 478 params['ieee80211h'] = '1' 479 params['acs_num_scans'] = '1' 480 params['acs_exclude_dfs'] = '1' 481 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 482 wait_acs(hapd) 483 484 state = hapd.get_status_field("state") 485 if state != "ENABLED": 486 raise Exception("Unexpected interface state") 487 488 freq = int(hapd.get_status_field("freq")) 489 if freq in [5260, 5280, 5300, 5320, 490 5500, 5520, 5540, 5560, 5580, 5600, 5620, 5640, 5660, 5680]: 491 raise Exception("Unexpected frequency: %d" % freq) 492 493 dev[0].connect("test-acs", psk="12345678", scan_freq=str(freq)) 494 dev[0].wait_regdom(country_ie=True) 495 finally: 496 if hapd: 497 hapd.request("DISABLE") 498 dev[0].disconnect_and_stop_scan() 499 hostapd.cmd_execute(apdev[0], ['iw', 'reg', 'set', '00']) 500 dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5) 501 dev[0].flush_scan_cache() 502 503@long_duration_test 504def test_ap_acs_vht160_dfs(dev, apdev): 505 """Automatic channel selection 160 MHz, HT scan, and DFS""" 506 try: 507 hapd = None 508 force_prev_ap_on_5g(apdev[0]) 509 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 510 params['hw_mode'] = 'a' 511 params['channel'] = '0' 512 params['ht_capab'] = '[HT40+]' 513 params['country_code'] = 'US' 514 params['ieee80211ac'] = '1' 515 params['vht_oper_chwidth'] = '2' 516 params['ieee80211d'] = '1' 517 params['ieee80211h'] = '1' 518 params['acs_num_scans'] = '1' 519 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 520 wait_acs(hapd, return_after_acs=True) 521 522 wait_dfs_event(hapd, "DFS-CAC-START", 5) 523 ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70) 524 if "success=1" not in ev: 525 raise Exception("CAC failed") 526 527 ev = hapd.wait_event(["AP-ENABLED"], timeout=5) 528 if not ev: 529 raise Exception("AP setup timed out") 530 531 state = hapd.get_status_field("state") 532 if state != "ENABLED": 533 raise Exception("Unexpected interface state") 534 535 freq = int(hapd.get_status_field("freq")) 536 if freq not in [5180, 5500]: 537 raise Exception("Unexpected frequency: %d" % freq) 538 539 dev[0].connect("test-acs", psk="12345678", scan_freq=str(freq)) 540 dev[0].wait_regdom(country_ie=True) 541 finally: 542 if hapd: 543 hapd.request("DISABLE") 544 dev[0].disconnect_and_stop_scan() 545 hostapd.cmd_execute(apdev[0], ['iw', 'reg', 'set', '00']) 546 dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5) 547 dev[0].flush_scan_cache() 548 549def test_ap_acs_hw_mode_any(dev, apdev): 550 """Automatic channel selection with hw_mode=any""" 551 force_prev_ap_on_24g(apdev[0]) 552 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 553 params['channel'] = '0' 554 params['hw_mode'] = 'any' 555 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 556 wait_acs(hapd) 557 558 freq = hapd.get_status_field("freq") 559 if int(freq) < 2400: 560 raise Exception("Unexpected frequency") 561 562 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 563 564def test_ap_acs_hw_mode_any_5ghz(dev, apdev): 565 """Automatic channel selection with hw_mode=any and 5 GHz""" 566 try: 567 hapd = None 568 force_prev_ap_on_5g(apdev[0]) 569 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 570 params['hw_mode'] = 'any' 571 params['channel'] = '0' 572 params['country_code'] = 'US' 573 params['acs_chan_bias'] = '36:0.7 40:0.7 44:0.7 48:0.7' 574 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 575 wait_acs(hapd) 576 freq = hapd.get_status_field("freq") 577 if int(freq) < 5000: 578 raise Exception("Unexpected frequency") 579 580 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 581 dev[0].wait_regdom(country_ie=True) 582 finally: 583 clear_regdom(hapd, dev) 584 585def test_ap_acs_with_fallback_to_20(dev, apdev): 586 """Automatic channel selection with fallback to 20 MHz""" 587 force_prev_ap_on_24g(apdev[0]) 588 params = {"ssid": "legacy-20", 589 "channel": "7", "ieee80211n": "0"} 590 hostapd.add_ap(apdev[1], params) 591 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 592 params['channel'] = '0' 593 params['acs_chan_bias'] = '6:0.1' 594 params['ht_capab'] = '[HT40+]' 595 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 596 wait_acs(hapd) 597 598 freq = hapd.get_status_field("freq") 599 if int(freq) < 2400: 600 raise Exception("Unexpected frequency") 601 602 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 603 sig = dev[0].request("SIGNAL_POLL").splitlines() 604 logger.info("SIGNAL_POLL: " + str(sig)) 605 if "WIDTH=20 MHz" not in sig: 606 raise Exception("Station did not report 20 MHz bandwidth") 607 608def test_ap_acs_rx_during(dev, apdev): 609 """Automatic channel selection and RX during ACS""" 610 force_prev_ap_on_24g(apdev[0]) 611 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 612 params['channel'] = '0' 613 params['chanlist'] = '1 6 11' 614 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 615 616 time.sleep(0.1) 617 hapd.set("ext_mgmt_frame_handling", "1") 618 bssid = hapd.own_addr().replace(':', '') 619 addr = "020304050607" 620 broadcast = 6*"ff" 621 622 probereq = "40000000" + broadcast + addr + broadcast + "1000" 623 probereq += "0000" + "010802040b160c121824" + "32043048606c" + "030100" 624 if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % probereq): 625 raise Exception("MGMT_RX_PROCESS failed") 626 627 probereq = "40000000" + broadcast + addr + broadcast + "1000" 628 probereq += "0000" + "010102" 629 if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2437 datarate=0 ssi_signal=-30 frame=%s" % probereq): 630 raise Exception("MGMT_RX_PROCESS failed") 631 632 auth = "b0003a01" + bssid + addr + bssid + '1000000001000000' 633 if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % auth): 634 raise Exception("MGMT_RX_PROCESS failed") 635 hapd.set("ext_mgmt_frame_handling", "0") 636 637 time.sleep(0.2) 638 try: 639 for i in range(3): 640 dev[i].request("SCAN_INTERVAL 1") 641 dev[i].connect("test-acs", psk="12345678", 642 scan_freq="2412 2437 2462", wait_connect=False) 643 wait_acs(hapd) 644 for i in range(3): 645 dev[i].wait_connected() 646 finally: 647 for i in range(3): 648 dev[i].request("SCAN_INTERVAL 5") 649 650def test_ap_acs_he_24g(dev, apdev): 651 """Automatic channel selection on 2.4 GHz with HE""" 652 clear_scan_cache(apdev[0]) 653 force_prev_ap_on_24g(apdev[0]) 654 655 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 656 params['channel'] = '0' 657 params['ieee80211ax'] = '1' 658 params['ht_capab'] = '[HT40+]' 659 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 660 wait_acs(hapd) 661 662 freq = hapd.get_status_field("freq") 663 if int(freq) < 2400: 664 raise Exception("Unexpected frequency") 665 666 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 667 668def test_ap_acs_he_24g_overlap(dev, apdev): 669 """Automatic channel selection on 2.4 GHz with HE (overlap)""" 670 clear_scan_cache(apdev[0]) 671 force_prev_ap_on_24g(apdev[0]) 672 673 params = {"ssid": "overlapping", 674 "channel": "6", "ieee80211n": "1"} 675 hostapd.add_ap(apdev[1], params) 676 677 params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678") 678 params['channel'] = '0' 679 params['ieee80211ax'] = '1' 680 params['ht_capab'] = '[HT40+]' 681 hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) 682 wait_acs(hapd) 683 684 freq = hapd.get_status_field("freq") 685 if int(freq) < 2400: 686 raise Exception("Unexpected frequency") 687 688 dev[0].connect("test-acs", psk="12345678", scan_freq=freq) 689
