/hal_telink-3.7.0/tlsr9/drivers/B91/ |
D | sys.c | 57 analog_write_reg8(0x8c,0x02); //<1>:reg_xo_en_clk_ana_ana=1 in sys_init() 64 analog_write_reg8(0x0c, 0x40); //poweron_dft: 0x44 --> 0x40. in sys_init() 67 analog_write_reg8(0x0a, power_mode);//poweron_dft: 0x90. in sys_init() 74 analog_write_reg8(0x0b, 0x3b); //poweron_dft: 0x7b -> 0x3b. in sys_init() 76 analog_write_reg8(0x05,analog_read_reg8(0x05) & (~BIT(3)));//poweron_dft: 0x02 -> 0x02. in sys_init() 78 …analog_write_reg8(0x06,analog_read_reg8(0x06) & ~(BIT(0) | vbat_v | BIT(6) | BIT(7)));//poweron_df… in sys_init() 83 analog_write_reg8(0x01, 0x45); //poweron_dft: 0x44 -> 0x45. in sys_init() 120 …analog_write_reg8(PM_ANA_REG_POWER_ON_CLR_BUF0, analog_read_reg8(PM_ANA_REG_POWER_ON_CLR_BUF0) | B… in sys_init() 129 analog_write_reg8(0x7d, 0x80); //power on baseband in sys_init() 133 analog_write_reg8(0x7d, 0x80); //poweron_dft: 0x03 -> 0x80. in sys_init()
|
D | lpc.c | 39 analog_write_reg8(0x0b,analog_read_reg8(0x0b)|0x08); in lpc_set_input_ref() 40 analog_write_reg8(0x0d,analog_read_reg8(0x0d)|0x80); in lpc_set_input_ref() 44 analog_write_reg8(0x0b,analog_read_reg8(0x0b)&0xf7); in lpc_set_input_ref() 45 analog_write_reg8(0x0d,analog_read_reg8(0x0d)&0x7f); in lpc_set_input_ref() 47 analog_write_reg8(0x0d,(analog_read_reg8(0x0d)&0x8f)|(ref<<4)); in lpc_set_input_ref()
|
D | clock.c | 80 analog_write_reg8(0x4e, sel_32k|(src<<7)); in clock_32k_init() 83 analog_write_reg8(0x05, power_32k|0x1);//32k xtal in clock_32k_init() 87 analog_write_reg8(0x05, power_32k|0x2);//32k rc in clock_32k_init() 133 analog_write_reg8(0x03,0x4f); //<7:6>current select in clock_kick_32k_xtal() 166 analog_write_reg8(0xc8, 0x80); in clock_cal_24m_rc() 169 analog_write_reg8(0x4f, analog_read_reg8(0x4f) | BIT(7) ); in clock_cal_24m_rc() 171 analog_write_reg8(0xc7, 0x0e); in clock_cal_24m_rc() 172 analog_write_reg8(0xc7, 0x0f); in clock_cal_24m_rc() 175 analog_write_reg8(0x52, cap); //write 24m cap into manual register in clock_cal_24m_rc() 177 analog_write_reg8(0x4f, analog_read_reg8(0x4f) & (~BIT(7)) ); in clock_cal_24m_rc() [all …]
|
D | pm.c | 165 analog_write_reg8 (areg, val); in pm_set_gpio_wakeup() 176 analog_write_reg8 (areg, val); in pm_set_gpio_wakeup() 186 analog_write_reg8(0x81, ana_81 | BIT(6)); in pm_wait_bbpll_done() 194 analog_write_reg8(0x81, ana_81 & 0xbf); in pm_wait_bbpll_done() 200 analog_write_reg8(0x01, 0x46); in pm_wait_bbpll_done() 203 analog_write_reg8(0x01, 0x43); in pm_wait_bbpll_done() 206 analog_write_reg8(0x81, ana_81 & 0xbf); in pm_wait_bbpll_done() 224 analog_write_reg8(PM_ANA_REG_WD_CLR_BUF0, analog_38 & 0xfe); in pm_update_status_info() 227 analog_write_reg8(PM_ANA_REG_WD_CLR_BUF0,analog_38 & 0xfe); in pm_update_status_info() 228 analog_write_reg8(PM_ANA_REG_POWER_ON_CLR_BUF0, analog_39 | BIT(0)); in pm_update_status_info() [all …]
|
D | adc.h | 160 …analog_write_reg8 (areg_adc_pga_ctrl, (analog_read_reg8(areg_adc_pga_ctrl)&(~FLD_SAR_ADC_POWER_DOW… in adc_power_on() 168 …analog_write_reg8 (areg_adc_pga_ctrl, (analog_read_reg8(areg_adc_pga_ctrl)|FLD_SAR_ADC_POWER_DOWN)… in adc_power_off() 201 …analog_write_reg8(areg_adc_clk_setting , analog_read_reg8(areg_adc_clk_setting ) | FLD_CLK_24M_TO_… in adc_clk_en() 209 …analog_write_reg8(areg_adc_clk_setting , analog_read_reg8(areg_adc_clk_setting ) & (~FLD_CLK_24M_T… in adc_clk_dis() 218 analog_write_reg8(areg_adc_sample_clk_div, div); in adc_set_clk() 226 analog_write_reg8(areg_adc_chn_en, FLD_ADC_CHN_EN_M | (ADC_MAX_STATE_NUM<<4) ); in adc_set_m_chn_en() 235 analog_write_reg8(areg_adc_res_m, (analog_read_reg8(areg_adc_res_m)&(~FLD_ADC_RES_M)) | res); in adc_set_resolution() 246 analog_write_reg8(areg_adc_tsmaple_m, sample_cycle); //optimize, <7:4> not cared in adc_set_tsample_cycle() 254 …analog_write_reg8(areg_temp_sensor_ctrl, (analog_read_reg8(areg_temp_sensor_ctrl)&(~FLD_TEMP_SENSO… in adc_temp_sensor_power_on() 262 …analog_write_reg8(areg_temp_sensor_ctrl, (analog_read_reg8(areg_temp_sensor_ctrl)|FLD_TEMP_SENSOR_… in adc_temp_sensor_power_off() [all …]
|
D | lpc.h | 80 analog_write_reg8(0x07,(analog_read_reg8(0x07))|0x08); in lpc_power_down() 89 analog_write_reg8(0x06,analog_read_reg8(0x06) & 0xfd); in lpc_power_on() 99 analog_write_reg8(0x0d,(analog_read_reg8(0x0d) & 0xf8) | pin); in lpc_set_input_chn() 109 analog_write_reg8(0x0b,(analog_read_reg8(0x0b)&0xcf)|(divider<<4)); in lpc_set_scaling_coeff()
|
D | mdec.h | 39 analog_write_reg8(mdec_rst_addr,analog_read_reg8(mdec_rst_addr) | FLD_MDEC_RST); in mdec_reset() 40 analog_write_reg8(mdec_rst_addr,analog_read_reg8(mdec_rst_addr) & (~FLD_MDEC_RST)); in mdec_reset() 62 analog_write_reg8(reg_wakeup_status, (analog_read_reg8(reg_wakeup_status) | status)); in mdec_clr_irq_status()
|
D | gpio.c | 80 analog_write_reg8(areg_gpio_pc_ie, analog_read_reg8(areg_gpio_pc_ie)|bit); in gpio_input_en() 85 analog_write_reg8(areg_gpio_pd_ie, analog_read_reg8(areg_gpio_pd_ie)|bit); in gpio_input_en() 106 analog_write_reg8(areg_gpio_pc_ie, analog_read_reg8(areg_gpio_pc_ie)&(~bit)); in gpio_input_dis() 111 analog_write_reg8(areg_gpio_pd_ie, analog_read_reg8(areg_gpio_pd_ie)&(~bit)); in gpio_input_dis() 143 {analog_write_reg8(areg_gpio_pc_ds, analog_read_reg8(areg_gpio_pc_ds)|bit);} in gpio_ds_en() 145 {analog_write_reg8(areg_gpio_pd_ds, analog_read_reg8(areg_gpio_pd_ds)|bit);} in gpio_ds_en() 161 {analog_write_reg8(areg_gpio_pc_ds, analog_read_reg8(areg_gpio_pc_ds)&(~bit));} in gpio_ds_dis() 163 {analog_write_reg8(areg_gpio_pd_ds, analog_read_reg8(areg_gpio_pd_ds)&(~bit));} in gpio_ds_dis() 193 analog_write_reg8(areg_gpio_pc_ie, analog_read_reg8(areg_gpio_pc_ie) & (~bit)); in gpio_shutdown() 198 analog_write_reg8(areg_gpio_pd_ie, analog_read_reg8(areg_gpio_pd_ie) & (~bit)); in gpio_shutdown() [all …]
|
D | adc.c | 150 analog_write_reg8(areg_adc_vref, v_ref); in adc_set_ref_voltage() 155 analog_write_reg8(areg_ain_scale , (analog_read_reg8( areg_ain_scale )&(0xC0)) | 0x3d ); in adc_set_ref_voltage() 162 analog_write_reg8( areg_ain_scale , (analog_read_reg8( areg_ain_scale )&(0xC0)) | 0x15 ); in adc_set_ref_voltage() 200 …analog_write_reg8( areg_ain_scale , (analog_read_reg8( areg_ain_scale )&(~FLD_SEL_AIN_SCALE)) | … in adc_set_scale_factor() 210 …analog_write_reg8(areg_adc_vref_vbat_div, (analog_read_reg8(areg_adc_vref_vbat_div)&(~FLD_ADC_VREF… in adc_set_vbat_divider() 337 …analog_write_reg8(areg_adc_data_sample_control,analog_read_reg8(areg_adc_data_sample_control) | FL… in adc_get_code() 339 …analog_write_reg8(areg_adc_data_sample_control,analog_read_reg8(areg_adc_data_sample_control) & (~… in adc_get_code()
|
D | gpio_default.h | 875 analog_write_reg8 (0x0e, PULL_WAKEUP_SRC_PA0 | in gpio_analog_resistance_init() 880 analog_write_reg8 (0x0f, PULL_WAKEUP_SRC_PA4 | in gpio_analog_resistance_init() 885 analog_write_reg8 (0x10, PULL_WAKEUP_SRC_PB0 | in gpio_analog_resistance_init() 890 analog_write_reg8 (0x11, PULL_WAKEUP_SRC_PB4 | in gpio_analog_resistance_init() 896 analog_write_reg8 (0x12, PULL_WAKEUP_SRC_PC0 | in gpio_analog_resistance_init() 901 analog_write_reg8 (0x13, PULL_WAKEUP_SRC_PC4 | in gpio_analog_resistance_init() 907 analog_write_reg8 (0x14, PULL_WAKEUP_SRC_PD0 | in gpio_analog_resistance_init() 912 analog_write_reg8 (0x15, PULL_WAKEUP_SRC_PD4 | in gpio_analog_resistance_init() 917 analog_write_reg8 (0x16, PULL_WAKEUP_SRC_PE0 | in gpio_analog_resistance_init() 922 analog_write_reg8 (0x17, PULL_WAKEUP_SRC_PE4 | in gpio_analog_resistance_init() [all …]
|
D | usbhw.h | 395 analog_write_reg8 (0x0b, dat); in usb_dp_pullup_en() 407 analog_write_reg8(0x7d,analog_read_reg8(0x7d)&0xfd); in usb_power_on() 411 analog_write_reg8(0x7d,analog_read_reg8(0x7d)|0x02); in usb_power_on()
|
D | mdec.c | 41 …analog_write_reg8(mdec_rst_addr,(analog_read_reg8(mdec_rst_addr) & (~FLD_CLS_MDEC)) | pin);//A0/B7… in mdec_init()
|
D | analog.h | 77 _attribute_ram_code_sec_noinline_ void analog_write_reg8(unsigned char addr, unsigned char data);
|
D | audio.c | 308 analog_write_reg8(0x0c, analog_read_reg8(0x0c) & 0xf8); in audio_set_codec_supply() 309 analog_write_reg8(0x02,analog_read_reg8(0x02)|BIT(7)); in audio_set_codec_supply() 315 analog_write_reg8(0x0c, (analog_read_reg8(0x0c) & 0xf8) | 0x04); in audio_set_codec_supply() 316 analog_write_reg8(0x02,analog_read_reg8(0x02)&(~BIT(7))); in audio_set_codec_supply() 326 analog_write_reg8(0x0c, (analog_read_reg8(0x0c) & 0xf8) | 0x04); in audio_set_codec_supply() 327 analog_write_reg8(0x02,analog_read_reg8(0x02)|BIT(7)); in audio_set_codec_supply() 333 analog_write_reg8(0x0c, analog_read_reg8(0x0c) & 0xf8); in audio_set_codec_supply() 334 analog_write_reg8(0x02,analog_read_reg8(0x02)&(~BIT(7))); in audio_set_codec_supply()
|
D | pm.h | 212 analog_write_reg8(mdec_ctrl,((analog_read_reg8(mdec_ctrl) & (~0x0f)) | value)); in pm_set_mdec_value_wakeup()
|
D | analog.c | 126 void analog_write_reg8(unsigned char addr, unsigned char data){ in analog_write_reg8() function
|
D | rf.c | 105 analog_write_reg8(0x8b,0x04);//FREQ_CORR_CFG2_1 in rf_mode_init()
|
/hal_telink-3.7.0/tlsr9/drivers/B91/ext_driver/ |
D | ext_gpio.c | 58 …analog_write_reg8(base_ana_reg, (analog_read_reg8(base_ana_reg) & mask_not) | (r_val << shift_num)… in gpio_setup_up_down_resistor()
|
D | ext_misc.h | 143 #define analog_write analog_write_reg8
|