1 /***************************************************************************** 2 * @file blestack.h 3 * @author MDG 4 * @brief Header file for BLE stack 5 ***************************************************************************** 6 * @attention 7 * 8 * Copyright (c) 2018-2024 STMicroelectronics. 9 * All rights reserved. 10 * 11 * This software is licensed under terms that can be found in the LICENSE file 12 * in the root directory of this software component. 13 * If no LICENSE file comes with this software, it is provided AS-IS. 14 * 15 ***************************************************************************** 16 */ 17 18 #ifndef BLESTACK_H__ 19 #define BLESTACK_H__ 20 21 22 #include "auto/ble_types.h" 23 #include "ble_bufsize.h" 24 25 26 /* 27 * Definitions for return value of BleStack_Process( ) 28 */ 29 enum 30 { 31 BLE_SLEEPMODE_RUNNING = 0, 32 BLE_SLEEPMODE_CPU_HALT = 1, 33 BLE_SLEEPMODE_WAKETIMER = 2, 34 BLE_SLEEPMODE_NOTIMER = 3, 35 }; 36 37 /* 38 * Definitions for 'options' parameter 39 */ 40 enum 41 { 42 BLE_OPTIONS_LL_ONLY = 0x0001U, 43 BLE_OPTIONS_NO_SVC_CHANGE_DESC = 0x0002U, 44 BLE_OPTIONS_DEV_NAME_READ_ONLY = 0x0004U, 45 BLE_OPTIONS_EXTENDED_ADV = 0x0008U, 46 BLE_OPTIONS_REDUCED_DB_IN_NVM = 0x0020U, 47 BLE_OPTIONS_GATT_CACHING = 0x0040U, 48 BLE_OPTIONS_POWER_CLASS_1 = 0x0080U, 49 BLE_OPTIONS_APPEARANCE_WRITABLE = 0x0100U, 50 BLE_OPTIONS_ENHANCED_ATT = 0x0200U, 51 }; 52 53 /* 54 * Definitions for 'debug' parameter 55 */ 56 enum 57 { 58 BLE_DEBUG_RAND_ADDR_INIT = 0x00000010UL, 59 }; 60 61 /* 62 * This structure contains memory and low level hardware configuration data 63 * for the device 64 */ 65 typedef struct 66 { 67 68 /* Start address of the RAM buffer allocated for BLE stack library. 69 * It must be a 32bit aligned RAM area. 70 */ 71 uint8_t* bleStartRamAddress; 72 73 /* Size of the RAM buffer allocated for BLE stack library. 74 * (could be filled with BLE_TOTAL_BUFFER_SIZE return value) 75 */ 76 uint32_t total_buffer_size; 77 78 /* Start address of the RAM buffer allocated for GATT database. 79 * It must be a 32bit aligned RAM area. 80 */ 81 uint8_t* bleStartRamAddress_GATT; 82 83 /* Size of the RAM buffer allocated for GATT database. 84 * (could be filled with BLE_TOTAL_BUFFER_SIZE_GATT return value) 85 */ 86 uint32_t total_buffer_size_GATT; 87 88 /* Maximum number of Attributes (i.e. the number of characteristic + the 89 * number of characteristic values + the number of descriptors, excluding the 90 * services) that can be stored in the GATT database. 91 * Note that certain characteristics and relative descriptors are added 92 * automatically during device initialization so this parameters should be 9 93 * (or 6 w.r.t. options) plus the number of user Attributes (NUM_GATT_ 94 * ATTRIBUTES used in the calculation of BLE TOTAL_BUFFER_SIZE_GATT) 95 */ 96 uint16_t numAttrRecord; 97 98 /* Maximum number of Services that can be stored in the GATT database. 99 * Note that the GAP and GATT services are automatically added so this 100 * parameter should be 2 plus the number of user services (NUM_GATT_SERVICES 101 * used in the calculation of BLE_TOTAL_BUFFER_SIZE_GATT) 102 */ 103 uint16_t numAttrServ; 104 105 /* Size of the storage area for Attribute values (ATT_VALUE_ARRAY_SIZE used 106 * in the calculation of BLE_TOTAL_BUFFER_SIZE_GATT) 107 * This value depends on the number of attributes used by application. In 108 * particular the sum of the following quantities (in octets) should be made 109 * for each attribute: 110 * - attribute value length 111 * - 5, if UUID is 16 bit; 19, if UUID is 128 bit 112 * - 2, if server configuration descriptor is used 113 * - 2*numOfLinks, if client configuration descriptor is used 114 * - 2, if extended properties is used 115 * The total amount of memory needed is the sum of the above quantities for 116 * each attribute. 117 */ 118 uint16_t attrValueArrSize; 119 120 /* Maximum number of simultaneous connections that the device will support. 121 * Valid values are from 1 to 8 (NUM_LINKS used in the calculation of 122 * BLE_TOTAL_BUFFER_SIZE). 123 */ 124 uint8_t numOfLinks; 125 126 /* Prepare Write List size in terms of number of packet with ATT_MTU=23 bytes 127 */ 128 uint8_t prWriteListSize; 129 130 /* Number of allocated memory blocks 131 */ 132 uint16_t mblockCount; 133 134 /* Maximum supported ATT_MTU size 135 */ 136 uint16_t attMtu; 137 138 /* Maximum value of the connection-oriented channel Maximum Payload Size 139 * Range: 23 .. (BLE_EVT_MAX_PARAM_LEN - 7) 140 */ 141 uint16_t max_coc_mps; 142 143 /* Maximum number of connection-oriented channels. 144 * Range: 0 .. 64 145 */ 146 uint8_t max_coc_nbr; 147 148 /* Maximum number of connection-oriented channels in initiator mode. 149 * Range: 0 .. max_coc_nbr 150 */ 151 uint8_t max_coc_initiator_nbr; 152 153 /* Options flags 154 * Bitmap of the "BLE_OPTIONS_..." definitions (see above). 155 * - bit 0: 1: LL only 0: LL + host 156 * - bit 1: 1: no service change desc. 0: with service change desc. 157 * - bit 2: 1: device name Read-Only 0: device name R/W 158 * - bit 3: 1: extended adv supported 0: extended adv not supported 159 * - bit 5: 1: Reduced GATT db in NVM 0: Full GATT db in NVM 160 * - bit 6: 1: GATT caching is used 0: GATT caching is not used 161 * - bit 7: 1: LE Power Class 1 0: LE Power Class 2-3 162 * - bit 8: 1: appearance Writable 0: appearance Read-Only 163 * - bit 9: 1: Enhanced ATT supported 0: Enhanced ATT not supported 164 * - other bits: reserved 165 */ 166 uint16_t options; 167 168 /* Debug flags 169 * Bitmap of the "BLE_DEBUG_..." definitions (see above). 170 */ 171 uint32_t debug; 172 173 } BleStack_init_t; 174 175 /* 176 * BleStack_Init 177 * 178 * @brief The BLE Stack initialization routine 179 * 180 * @param[in] Init_params_p pointer to the const structure containing 181 * memory and low level hardware configuration 182 * data for the device 183 * 184 * @return Value indicating success or error code. 185 */ 186 extern tBleStatus BleStack_Init( const BleStack_init_t* init_params_p ); 187 188 /* 189 * BleStack_Process 190 * 191 * @brief This function executes the processing of all Host Stack layers. 192 * It has to be executed regularly to process incoming Link Layer packets and 193 * to process Host Layers procedures. All stack callbacks are called by this 194 * function. 195 * 196 * No BLE stack function must be called while the BleStack_Process is running. 197 * For example, if a BLE stack function may be called inside an 198 * interrupt routine, that interrupt must be disabled during the execution of 199 * BleStack_Process(). 200 * 201 * @return 202 * BLE_SLEEPMODE_RUNNING (0) -> BLE Stack Process has to be executed, 203 * BLE_SLEEPMODE_CPU_HALT (1) -> BLE Stack Process does not have to be 204 * executed, 205 */ 206 extern uint8_t BleStack_Process( void ); 207 208 /* 209 * BleStack_Request 210 * 211 * @brief This function gives a request from application to the BLE stack. 212 * The input parameter is a buffer of bytes in the BLE standard format: 213 * HCI/ACI command packet or ACL data packet. 214 * The response packet is returned in the same buffer and the size (in bytes) 215 * of the response is given by the function return value. 216 */ 217 extern uint16_t BleStack_Request( uint8_t* buffer ); 218 219 /* 220 * BLECB_Indication 221 * 222 * @brief Callback called by the BLE stack (from BleStack_Process() context) 223 * to send an indication to the application. The indication is a BLE standard 224 * packet that can be either an ACI/HCI event or an ACL data. 225 */ 226 extern uint8_t BLECB_Indication( const uint8_t* data, 227 uint16_t length, 228 const uint8_t* ext_data, 229 uint16_t ext_length ); 230 231 232 #endif /* BLESTACK_H__ */ 233
