1 /***************************************************************************** 2 * @file ble_defs.h 3 * @author MDG 4 * @brief This file contains definitions used for BLE Stack interface. 5 ***************************************************************************** 6 * @attention 7 * 8 * Copyright (c) 2018-2023 STMicroelectronics. 9 * All rights reserved. 10 * 11 * This software is licensed under terms that can be found in the LICENSE file 12 * in the root directory of this software component. 13 * If no LICENSE file comes with this software, it is provided AS-IS. 14 * 15 ***************************************************************************** 16 */ 17 18 #ifndef BLE_DEFS_H__ 19 #define BLE_DEFS_H__ 20 21 22 /* ------------------------------------------------------------------------- */ 23 24 /* Status codes */ 25 26 /* Returned when the command has completed with success 27 */ 28 #define BLE_STATUS_SUCCESS 0x00U 29 30 /* The remote device in in the Blacklist and the pairing operation it requested 31 * cannot be performed. 32 */ 33 #define BLE_STATUS_DEV_IN_BLACKLIST 0x59U 34 35 /* CSRK not found during validation of an incoming signed packet 36 */ 37 #define BLE_STATUS_CSRK_NOT_FOUND 0x5AU 38 39 /* IRK not found (Currently not used) 40 */ 41 #define BLE_STATUS_IRK_NOT_FOUND 0x5BU 42 43 /* A search for a specific remote device was unsuccessful because no entry 44 * exists either into NVM Database or in volatile database. 45 */ 46 #define BLE_STATUS_DEV_NOT_FOUND 0x5CU 47 48 /* The remote device is not bonded, and no operations related to bonded devices 49 * may be performed (e.g. writing Gatt Client data). 50 */ 51 #define BLE_STATUS_DEV_NOT_BONDED 0x5EU 52 53 /* The attribute handle is invalid. 54 */ 55 #define BLE_STATUS_INVALID_HANDLE 0x60U 56 57 /* There aren't sufficient Attributes handles available for allocation during 58 * creation of Services, Characteristics or Descriptors. 59 */ 60 #define BLE_STATUS_OUT_OF_HANDLE 0x61U 61 62 /* The requested GATT operation is not allowed in this context/status or using 63 * the provided parameters. 64 * This is a specific GATT error, different from generic Not Allowed error, 65 * because it refers to specific GATT specifications/rules. 66 */ 67 #define BLE_STATUS_INVALID_OPERATION 0x62U 68 69 /* The requested operation failed for a temporary lack of resources 70 * (e.g. packet pool or timers), but it may be retried later when resources may 71 * become available (packets or timers may have been released by other 72 * consumers). 73 */ 74 #define BLE_STATUS_INSUFFICIENT_RESOURCES 0x64U 75 76 /* Notification/Indication can't be sent to the requested remote device because 77 * it doesn't satisfy the needed security permission. 78 */ 79 #define BLE_STATUS_SEC_PERMISSION_ERROR 0x65U 80 81 /* The address of the device could not be resolved using the IRK stored\n 82 */ 83 #define BLE_STATUS_ADDRESS_NOT_RESOLVED 0x70U 84 85 /* Returned when no valid slots are available 86 * (e.g. when there are no available state machines). 87 */ 88 #define BLE_STATUS_NO_VALID_SLOT 0x82U 89 90 /* The only slot available is not long enough to satisfy scan window request. 91 */ 92 #define BLE_STATUS_SCAN_WINDOW_SHORT 0x83U 93 94 /* Returned when the maximum requested interval to be allocated is shorter 95 * then the current anchor period and there is no submultiple for the 96 * current anchor period that is between the minimum and the maximum requested 97 * intervals. 98 */ 99 #define BLE_STATUS_NEW_INTERVAL_FAILED 0x84U 100 101 /* Returned when the maximum requested interval to be allocated is greater 102 * than the current anchor period and there is no multiple of the anchor 103 * period that is between the minimum and the maximum requested intervals. 104 */ 105 #define BLE_STATUS_INTERVAL_TOO_LARGE 0x85U 106 107 /* Returned when the current anchor period or a new one can be found that 108 * is compatible to the interval range requested by the new slot but the 109 * maximum available length that can be allocated is less than the minimum 110 * requested slot length. 111 */ 112 #define BLE_STATUS_LENGTH_FAILED 0x86U 113 114 /* The Host failed while performing the requested operation. 115 */ 116 #define BLE_STATUS_FAILED 0x91U 117 118 /* Invalid parameters in Host commands 119 */ 120 #define BLE_STATUS_INVALID_PARAMS 0x92U 121 122 /* The Host is already processing another request received in advance. 123 */ 124 #define BLE_STATUS_BUSY 0x93U 125 126 /* The operation requested cannot be completed immediately by the Host 127 * (usually because of lack of resources). 128 * The operation is generally put on hold by the caller and it's usually 129 * retried on later time. 130 */ 131 #define BLE_STATUS_PENDING 0x95U 132 133 /* The requested operation violates the logic of the called layer/function or 134 * the format of the data to be processed during the operation. 135 */ 136 #define BLE_STATUS_ERROR 0x97U 137 138 /* The requested operation failed because of lack of memory. 139 * Out of memory shall be returned for situations where memory will never 140 * become available again (e.g. ATT database) 141 */ 142 #define BLE_STATUS_OUT_OF_MEMORY 0x98U 143 144 /* Returned when a timeout occurs at BLE application interface 145 */ 146 #define BLE_STATUS_TIMEOUT 0xFFU 147 148 /* ------------------------------------------------------------------------- */ 149 150 /* Characteristic value lengths 151 */ 152 #define DEVICE_NAME_CHARACTERISTIC_LEN 8 153 #define APPEARANCE_CHARACTERISTIC_LEN 2 154 #define PERIPHERAL_PRIVACY_CHARACTERISTIC_LEN 1 155 #define RECONNECTION_ADDR_CHARACTERISTIC_LEN 6 156 #define PERIPHERAL_PREF_CONN_PARAMS_CHARACTERISTIC_LEN 8 157 158 /* Adv. lengths 159 */ 160 #define MAX_ADV_DATA_LEN 31U 161 #define BD_ADDR_SIZE 6U 162 163 /* Privacy flag values 164 */ 165 #define PRIVACY_DISABLED 0x00 166 #define PRIVACY_ENABLED 0x02 167 168 /* Intervals in terms of 625 micro sec 169 */ 170 #define DIR_CONN_ADV_INT_MIN 0x190U /* 250 ms */ 171 #define DIR_CONN_ADV_INT_MAX 0x320U /* 500 ms */ 172 #define UNDIR_CONN_ADV_INT_MIN 0x800U /* 1.28 s */ 173 #define UNDIR_CONN_ADV_INT_MAX 0x1000U /* 2.56 s */ 174 #define LIM_DISC_ADV_INT_MIN 0x190U /* 250 ms */ 175 #define LIM_DISC_ADV_INT_MAX 0x320U /* 500 ms */ 176 #define GEN_DISC_ADV_INT_MIN 0x800U /* 1.28 s */ 177 #define GEN_DISC_ADV_INT_MAX 0x1000U /* 2.56 s */ 178 179 /* GAP Roles 180 */ 181 #define GAP_PERIPHERAL_ROLE 0x01U 182 #define GAP_BROADCASTER_ROLE 0x02U 183 #define GAP_CENTRAL_ROLE 0x04U 184 #define GAP_OBSERVER_ROLE 0x08U 185 186 /* GAP procedure codes 187 * Procedure codes for ACI_GAP_PROC_COMPLETE_EVENT event 188 * and ACI_GAP_TERMINATE_GAP_PROC command. 189 */ 190 #define GAP_LIMITED_DISCOVERY_PROC 0x01U 191 #define GAP_GENERAL_DISCOVERY_PROC 0x02U 192 #define GAP_PERIODIC_ADVERTISING_CONNECTION_PROC 0x04U 193 #define GAP_AUTO_CONNECTION_ESTABLISHMENT_PROC 0x08U 194 #define GAP_GENERAL_CONNECTION_ESTABLISHMENT_PROC 0x10U 195 #define GAP_SELECTIVE_CONNECTION_ESTABLISHMENT_PROC 0x20U 196 #define GAP_DIRECT_CONNECTION_ESTABLISHMENT_PROC 0x40U 197 #define GAP_OBSERVATION_PROC 0x80U 198 199 /* GAP Address Type 200 */ 201 #define GAP_PUBLIC_ADDR 0x00U 202 #define GAP_STATIC_RANDOM_ADDR 0x01U 203 #define GAP_RESOLVABLE_PRIVATE_ADDR 0x02U 204 #define GAP_NON_RESOLVABLE_PRIVATE_ADDR 0x03U 205 206 /* Bitmap definitions for Mode of ACI_GAP_ADD_DEVICES_TO_LIST 207 */ 208 #define GAP_ADD_DEV_MODE_RESOLVING_LIST_ONLY 0x00U 209 #define GAP_ADD_DEV_MODE_CLEAR 0x01U 210 #define GAP_ADD_DEV_MODE_FILTER_ACC_LIST_ONLY 0x02U 211 #define GAP_ADD_DEV_MODE_BOTH_LISTS 0x04U 212 213 /* ------------------------------------------------------------------------- */ 214 215 /* IO capabilities 216 * (ACI_GAP_SET_IO_CAPABILITY) 217 */ 218 #define IO_CAP_DISPLAY_ONLY 0x00U 219 #define IO_CAP_DISPLAY_YES_NO 0x01U 220 #define IO_CAP_KEYBOARD_ONLY 0x02U 221 #define IO_CAP_NO_INPUT_NO_OUTPUT 0x03U 222 #define IO_CAP_KEYBOARD_DISPLAY 0x04U 223 224 /* Bonding mode 225 * (ACI_GAP_SET_AUTHENTICATION_REQUIREMENT) 226 */ 227 #define NO_BONDING 0x00U 228 #define BONDING 0x01U 229 230 /* MITM protection 231 * (ACI_GAP_SET_AUTHENTICATION_REQUIREMENT) 232 */ 233 #define MITM_PROTECTION_NOT_REQUIRED 0x00U 234 #define MITM_PROTECTION_REQUIRED 0x01U 235 236 /* LE Secure Connections support 237 * (ACI_GAP_SET_AUTHENTICATION_REQUIREMENT) 238 */ 239 #define SC_PAIRING_UNSUPPORTED 0x00U 240 #define SC_PAIRING_OPTIONAL 0x01U 241 #define SC_PAIRING_ONLY 0x02U 242 243 /* Keypress notification support 244 * (ACI_GAP_SET_AUTHENTICATION_REQUIREMENT) 245 */ 246 #define KEYPRESS_NOT_SUPPORTED 0x00U 247 #define KEYPRESS_SUPPORTED 0x01U 248 249 /* Use fixed pin 250 * (ACI_GAP_SET_AUTHENTICATION_REQUIREMENT) 251 */ 252 #define USE_FIXED_PIN_FOR_PAIRING_ALLOWED 0x00U 253 #define USE_FIXED_PIN_FOR_PAIRING_FORBIDDEN 0x01U 254 255 /* Authorization requirements 256 * (ACI_GAP_SET_AUTHORIZATION_REQUIREMENT) 257 */ 258 #define AUTHORIZATION_NOT_REQUIRED 0x00U 259 #define AUTHORIZATION_REQUIRED 0x01U 260 261 /* Connection authorization response 262 * (ACI_GAP_AUTHORIZATION_RESP) 263 */ 264 #define CONNECTION_AUTHORIZED 0x01U 265 #define CONNECTION_REJECTED 0x02U 266 267 /* SMP pairing status 268 * (ACI_GAP_PAIRING_COMPLETE_EVENT) 269 */ 270 #define SMP_PAIRING_STATUS_SUCCESS 0x00U 271 #define SMP_PAIRING_STATUS_SMP_TIMEOUT 0x01U 272 #define SMP_PAIRING_STATUS_PAIRING_FAILED 0x02U 273 #define SMP_PAIRING_STATUS_ENCRYPT_FAILED 0x03U 274 275 /* SMP pairing failed reason code 276 * (ACI_GAP_PAIRING_COMPLETE_EVENT) 277 */ 278 #define REASON_PASSKEY_ENTRY_FAILED 0x01U 279 #define REASON_OOB_NOT_AVAILABLE 0x02U 280 #define REASON_AUTHENTICATION_REQ 0x03U 281 #define REASON_CONFIRM_VALUE_FAILED 0x04U 282 #define REASON_PAIRING_NOT_SUPPORTED 0x05U 283 #define REASON_ENCRYPTION_KEY_SIZE 0x06U 284 #define REASON_COMMAND_NOT_SUPPORTED 0x07U 285 #define REASON_UNSPECIFIED_REASON 0x08U 286 #define REASON_REPEATED_ATTEMPTS 0x09U 287 #define REASON_INVALID_PARAMETERS 0x0AU 288 #define REASON_DHKEY_CHECK_FAILED 0x0BU 289 #define REASON_NUM_COMPARISON_FAILED 0x0CU 290 #define REASON_KEY_REJECTED 0x0FU 291 292 /* Passkey input type detected 293 * (ACI_GAP_PASSKEY_INPUT) 294 */ 295 #define PASSKEY_ENTRY_STARTED 0x00U 296 #define PASSKEY_DIGIT_ENTERED 0x01U 297 #define PASSKEY_DIGIT_ERASED 0x02U 298 #define PASSKEY_CLEARED 0x03U 299 #define PASSKEY_ENTRY_COMPLETED 0x04U 300 301 /* Numeric Comparison Confirm Value 302 * (ACI_GAP_NUMERIC_COMPARISON_VALUE_CONFIRM_YESNO) 303 */ 304 #define NUMERIC_COMPARISON_CONFIRM_NO 0x00U 305 #define NUMERIC_COMPARISON_CONFIRM_YES 0x01U 306 307 /* OOB Device Type 308 * (ACI_GAP_SET_OOB_DATA) 309 */ 310 #define OOB_DEVICE_TYPE_LOCAL 0x00U 311 #define OOB_DEVICE_TYPE_REMOTE 0x01U 312 313 /* OOB Data Type 314 * (ACI_GAP_GET_OOB_DATA, ACI_GAP_SET_OOB_DATA) 315 */ 316 #define OOB_DATA_TYPE_LP_TK 0x00U 317 #define OOB_DATA_TYPE_SC_RANDOM 0x01U 318 #define OOB_DATA_TYPE_SC_CONFIRM 0x02U 319 320 /* ------------------------------------------------------------------------- */ 321 322 /* Access permissions for an attribute 323 */ 324 #define ATTR_NO_ACCESS 0x00U 325 #define ATTR_ACCESS_READ_ONLY 0x01U 326 #define ATTR_ACCESS_WRITE_REQ_ONLY 0x02U 327 #define ATTR_ACCESS_READ_WRITE 0x03U 328 #define ATTR_ACCESS_WRITE_WITHOUT_RESPONSE 0x04U 329 #define ATTR_ACCESS_SIGNED_WRITE_ALLOWED 0x08U 330 #define ATTR_ACCESS_WRITE_ANY 0x0EU 331 #define ATTR_ACCESS_ANY 0x0FU 332 333 /* Characteristic properties 334 */ 335 #define CHAR_PROP_NONE 0x00U 336 #define CHAR_PROP_BROADCAST 0x01U 337 #define CHAR_PROP_READ 0x02U 338 #define CHAR_PROP_WRITE_WITHOUT_RESP 0x04U 339 #define CHAR_PROP_WRITE 0x08U 340 #define CHAR_PROP_NOTIFY 0x10u 341 #define CHAR_PROP_INDICATE 0x20U 342 #define CHAR_PROP_SIGNED_WRITE 0x40U 343 #define CHAR_PROP_EXT 0x80U 344 345 /* Security permissions for an attribute 346 */ 347 #define ATTR_PERMISSION_NONE 0x00U /* No security. */ 348 #define ATTR_PERMISSION_AUTHEN_READ 0x01U /* Need authentication to read */ 349 #define ATTR_PERMISSION_AUTHOR_READ 0x02U /* Need authorization to read */ 350 #define ATTR_PERMISSION_ENCRY_READ 0x04U /* Need encryption to read */ 351 #define ATTR_PERMISSION_AUTHEN_WRITE 0x08U /* Need authentication to write */ 352 #define ATTR_PERMISSION_AUTHOR_WRITE 0x10U /* Need authorization to write */ 353 #define ATTR_PERMISSION_ENCRY_WRITE 0x20U /* Need encryption to write */ 354 355 /* Type of UUID (16 bit or 128 bit) 356 */ 357 #define UUID_TYPE_16 0x01U 358 #define UUID_TYPE_128 0x02U 359 360 /* Type of service (primary or secondary) 361 */ 362 #define PRIMARY_SERVICE 0x01U 363 #define SECONDARY_SERVICE 0x02U 364 365 /* Gatt Event Mask 366 * Type of event generated by GATT server 367 * See aci_gatt_add_char. 368 */ 369 #define GATT_DONT_NOTIFY_EVENTS 0x00U 370 #define GATT_NOTIFY_ATTRIBUTE_WRITE 0x01U 371 #define GATT_NOTIFY_WRITE_REQ_AND_WAIT_FOR_APPL_RESP 0x02U 372 #define GATT_NOTIFY_READ_REQ_AND_WAIT_FOR_APPL_RESP 0x04U 373 #define GATT_NOTIFY_NOTIFICATION_COMPLETION 0x08U 374 375 /* Type of characteristic length (see ACI_GATT_ADD_CHAR) 376 */ 377 #define CHAR_VALUE_LEN_CONSTANT 0x00 378 #define CHAR_VALUE_LEN_VARIABLE 0x01 379 380 /* Encryption key size 381 */ 382 #define MIN_ENCRY_KEY_SIZE 7U 383 #define MAX_ENCRY_KEY_SIZE 16U 384 385 /* Format 386 */ 387 #define FORMAT_UINT8 0x04U 388 #define FORMAT_UINT16 0x06U 389 #define FORMAT_SINT16 0x0EU 390 #define FORMAT_SINT24 0x0FU 391 392 /* Unit 393 */ 394 #define UNIT_UNITLESS 0x2700 395 #define UNIT_TEMP_CELSIUS 0x272F 396 #define UNIT_PRESSURE_BAR 0x2780 397 398 /* Update_Type definitions for ACI_GATT_UPDATE_CHAR_VALUE_EXT 399 */ 400 #define GATT_CHAR_UPDATE_LOCAL_ONLY 0x00U 401 #define GATT_CHAR_UPDATE_SEND_NOTIFICATION 0x01U 402 #define GATT_CHAR_UPDATE_SEND_INDICATION 0x02U 403 404 /* ------------------------------------------------------------------------- */ 405 406 /* Advertising Type 407 */ 408 #define ADV_IND 0 409 #define ADV_DIRECT_IND 1 410 #define ADV_SCAN_IND 2 411 #define ADV_NONCONN_IND 3 412 #define ADV_DIRECT_IND_LDC 4 413 #define SCAN_RSP 4 414 415 /* Advertising channels 416 */ 417 #define ADV_CH_37 0x01 418 #define ADV_CH_38 0x02 419 #define ADV_CH_39 0x04 420 421 /* ------------------------------------------------------------------------- */ 422 423 /* Definitions for Radio_Activity_Mask 424 * (ACI_HAL_SET_RADIO_ACTIVITY_MASK) 425 */ 426 #define RADIO_ACT_MASK_IDLE 0x0001U 427 #define RADIO_ACT_MASK_ADVERTISING 0x0002U 428 #define RADIO_ACT_MASK_PERIPH_CONNECT 0x0004U 429 #define RADIO_ACT_MASK_SCANNING 0x0008U 430 #define RADIO_ACT_MASK_CENTR_CONNECT 0x0020U 431 #define RADIO_ACT_MASK_TX_TEST 0x0040U 432 #define RADIO_ACT_MASK_RX_TEST 0x0080U 433 #define RADIO_ACT_MASK_PERIOD_ADVERTISING 0x0200U 434 #define RADIO_ACT_MASK_PERIOD_SYNC 0x0400U 435 #define RADIO_ACT_MASK_ISO_BROADCAST 0x0800U 436 #define RADIO_ACT_MASK_ISO_SYNC 0x1000U 437 #define RADIO_ACT_MASK_ISO_PERIPH_CONNECT 0x2000U 438 #define RADIO_ACT_MASK_ISO_CENTR_CONNECT 0x4000U 439 440 /* ------------------------------------------------------------------------- */ 441 442 /* Definitions for FW_Error_Type 443 * (ACI_HAL_FW_ERROR_EVENT) 444 */ 445 #define FW_L2CAP_RECOMBINATION_ERROR 0x01U 446 #define FW_GATT_UNEXPECTED_PEER_MESSAGE 0x02U 447 #define FW_NVM_LEVEL_WARNING 0x03U 448 #define FW_COC_RX_DATA_LENGTH_TOO_LARGE 0x04U 449 #define FW_ECOC_CONN_RSP_ALREADY_ASSIGNED_DCID 0x05U 450 451 /* ------------------------------------------------------------------------- */ 452 453 /* Offset for configuration values (see ACI_HAL_WRITE_CONFIG_DATA) 454 */ 455 #define CONFIG_DATA_PUBADDR_OFFSET 0x00U 456 #define CONFIG_DATA_ER_OFFSET 0x08U 457 #define CONFIG_DATA_IR_OFFSET 0x18U 458 #define CONFIG_DATA_RANDOM_ADDRESS_OFFSET 0x2EU 459 #define CONFIG_DATA_GAP_ADD_REC_NBR_OFFSET 0x34U 460 #define CONFIG_DATA_SC_KEY_TYPE_OFFSET 0x35U 461 #define CONFIG_DATA_SMP_MODE_OFFSET 0xB0U 462 #define CONFIG_DATA_LL_SCAN_CHAN_MAP_OFFSET 0xC0U 463 #define CONFIG_DATA_LL_BG_SCAN_MODE_OFFSET 0xC1U 464 465 /* Length for configuration values (see ACI_HAL_WRITE_CONFIG_DATA) 466 */ 467 #define CONFIG_DATA_PUBADDR_LEN 6 468 #define CONFIG_DATA_ER_LEN 16 469 #define CONFIG_DATA_IR_LEN 16 470 #define CONFIG_DATA_RANDOM_ADDRESS_LEN 6 471 #define CONFIG_DATA_GAP_ADD_REC_NBR_LEN 1 472 #define CONFIG_DATA_SC_KEY_TYPE_LEN 1 473 #define CONFIG_DATA_SMP_MODE_LEN 1 474 #define CONFIG_DATA_LL_SCAN_CHAN_MAP_LEN 1 475 #define CONFIG_DATA_LL_BG_SCAN_MODE_LEN 1 476 477 /* ------------------------------------------------------------------------- */ 478 479 480 #endif /* BLE_DEFS_H__ */ 481
