| /hal_intel-3.6.0/bsp_sedi/soc/intel_ish/pm/ |
| D | ish_dma.c | 74 int ish_dma_copy(uint32_t chan, uint32_t dst, uint32_t src, uint32_t length, in ish_dma_copy() argument
113 while (length) { in ish_dma_copy()
114 chunk = (length > DMA_MAX_BLOCK_SIZE) ? DMA_MAX_BLOCK_SIZE in ish_dma_copy()
115 : length; in ish_dma_copy()
134 length -= chunk; in ish_dma_copy()
|
| D | ish_dma.h | 62 int ish_dma_copy(uint32_t chan, uint32_t dst, uint32_t src, uint32_t length,
|
| /hal_intel-3.6.0/bsp_sedi/include/driver/ |
| D | sedi_driver_ipc.h | 98 #define IPC_BUILD_DRBL(length, protocol) \ argument
101 | ((length) << IPC_HEADER_LENGTH_OFFSET))
103 #define IPC_BUILD_MNG_DRBL(cmd, length) \ argument
107 | ((length) << IPC_HEADER_LENGTH_OFFSET))
|
| D | sedi_driver_dma.h | 407 IN uint32_t length);
421 IN uint32_t length);
|
| D | sedi_driver_uart.h | 1001 IN uint32_t length);
1018 IN uint32_t length, OUT uint32_t *status);
|
| /hal_intel-3.6.0/bsp_sedi/drivers/dma/ |
| D | sedi_dma_ann_1p0.c | 593 uint32_t dest_addr, uint32_t length) in sedi_dma_start_transfer_aux() argument
614 length); in sedi_dma_start_transfer_aux()
637 IN uint32_t length) in sedi_dma_start_transfer() argument
643 DBG_CHECK((length <= DMA_MAX_BLOCK_SIZE) && (length > 0), in sedi_dma_start_transfer()
662 length); in sedi_dma_start_transfer()
720 IN uint32_t length) in sedi_dma_start_transfer_polling() argument
724 DBG_CHECK(length <= DMA_MAX_BLOCK_SIZE, SEDI_DRIVER_ERROR_PARAMETER); in sedi_dma_start_transfer_polling()
755 SET_BITS(chan_regs->ctrl_high, BLOCK_TS_LOC, BLOCK_TS_LEN, length); in sedi_dma_start_transfer_polling()
|
| /hal_intel-3.6.0/bsp_sedi/drivers/i2c/ |
| D | sedi_i2c_dw_apb_200a.c | 269 static int dw_i2c_poll_write(uint32_t base, const uint8_t *buffer, uint32_t length, bool pending) in dw_i2c_poll_write() argument
275 for (uint32_t i = 0; i < length; i++) { in dw_i2c_poll_write()
276 if ((i == length - 1) && (!pending)) { in dw_i2c_poll_write()
297 static int dw_i2c_poll_read(uint32_t base, uint8_t *buffer, uint32_t length, bool pending) in dw_i2c_poll_read() argument
302 for (uint32_t i = 0; i < length; i++) { in dw_i2c_poll_read()
303 if ((i == length - 1) && (!pending)) { in dw_i2c_poll_read()
|
| /hal_intel-3.6.0/bsp_sedi/drivers/usart/ |
| D | sedi_dw_uart.c | 1923 const uint8_t *buff, uint32_t length, dma_operation_type_t op) in sedi_uart_dma_io_polled() argument
1965 ret = sedi_dma_start_transfer_polling(dma_dev, channel, src, dst, length); in sedi_uart_dma_io_polled()
2067 IN uint8_t *buff, IN uint32_t length) in sedi_uart_dma_write_polled() argument
2073 DBG_CHECK(length != 0, SEDI_DRIVER_ERROR_PARAMETER); in sedi_uart_dma_write_polled()
2078 ret = sedi_uart_dma_io_polled(uart, dma_dev, channel, buff, length, WRITE); in sedi_uart_dma_write_polled()
2083 OUT uint8_t *buff, IN uint32_t length, OUT uint32_t *status) in sedi_uart_dma_read_polled() argument
2089 DBG_CHECK(length != 0, SEDI_DRIVER_ERROR_PARAMETER); in sedi_uart_dma_read_polled()
2096 ret = sedi_uart_dma_io_polled(uart, dma_dev, channel, buff, length, READ); in sedi_uart_dma_read_polled()
|
| /hal_intel-3.6.0/docs/ |
| D | bsp_sedi_doxyfile | 2409 # to display on a single line. If the actual line length exceeds this threshold
|
