seconds (reference) in projects: hal_espressif-3.6.0

Project(s)

Full Search
Definition
Symbol
File Path
History
Type

Searched refs:seconds (Results 1 – 25 of 87) sorted by relevance

12 3 4

/hal_espressif-3.6.0/examples/storage/nvs_rw_value_cxx/
D	README.md	`36 Restarting in 10 seconds... 37 Restarting in 9 seconds... 38 Restarting in 8 seconds... 39 Restarting in 7 seconds... 40 Restarting in 6 seconds... 41 Restarting in 5 seconds... 42 Restarting in 4 seconds... 43 Restarting in 3 seconds... 44 Restarting in 2 seconds... 45 Restarting in 1 seconds... [all …]`
/hal_espressif-3.6.0/examples/storage/nvs_rw_value/
D	README.md	`42 Restarting in 10 seconds... 43 Restarting in 9 seconds... 44 Restarting in 8 seconds... 45 Restarting in 7 seconds... 46 Restarting in 6 seconds... 47 Restarting in 5 seconds... 48 Restarting in 4 seconds... 49 Restarting in 3 seconds... 50 Restarting in 2 seconds... 51 Restarting in 1 seconds... [all …]`
/hal_espressif-3.6.0/examples/build_system/cmake/idf_as_lib/
D	README.md	`24 Restarting in 10 seconds... 25 Restarting in 9 seconds... 26 Restarting in 8 seconds... 27 Restarting in 7 seconds... 28 Restarting in 6 seconds... 29 Restarting in 5 seconds... 30 Restarting in 4 seconds... 31 Restarting in 3 seconds... 32 Restarting in 2 seconds... 33 Restarting in 1 seconds... [all …]`
/hal_espressif-3.6.0/examples/bluetooth/nimble/throughput_app/blecent_throughput/
D	README.md	10 …hroughput test method for 30 seconds (`BLE_RX_TIMEOUT`) then the program starts with default READ … 18 …d between these two devices, user is given a window of `YES_NO_PARAM` (5 seconds) to customize con… 28 \| Test time: Enter value in seconds. \| 32 \| Enter 'throughput read 60' for reading char for 60 seconds \| 33 \| OR 'throughput write 60' for writing to char for 60 seconds \| 34 \| OR 'throughput notify 60' for notifications (for 60 seconds)\| 39 …f user fail to enter any values for next 30 seconds, the app falls to default behavior of READ for… 90 \| Test time: Enter value in seconds. \| 94 \| ** Enter 'throughput read 60' for reading char for 60 seconds \| 95 \| OR 'throughput write 60' for writing to char for 60 seconds \| [all …]
/hal_espressif-3.6.0/examples/bluetooth/nimble/throughput_app/
D	README.md	7 …s to specify throughput test name (`read`, `write` or `notify`) and test time in seconds. Below are 8 sample numbers of different throughput test runs for 60 seconds (MTU = 512, conn itvl = 7.5msec, co… 12 \|NOTIFY \| 60 seconds \| ~340Kbps\| 13 \|READ \| 60 seconds \| ~200kbps\| 14 \|WRITE \| 60 seconds \| ~500kbps\|
/hal_espressif-3.6.0/examples/common_components/pcap/src/
D	pcap.c	`40 uint32_t seconds; /!< Number of seconds since January 1st, 1970, 00:00:00 GMT / member 114 …packet(pcap_file_handle_t pcap, void *payload, uint32_t length, uint32_t seconds, uint32_t microse… in pcap_capture_packet() argument 119 .seconds = seconds, in pcap_capture_packet() 168 fprintf(print_file, "Timestamp (Seconds): %d\n", packet_header.seconds); in pcap_print_summary()`
/hal_espressif-3.6.0/docs/zh_CN/get-started/
D	index.rst	570 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 5962.8 kbit/s)... 574 … Wrote 26096 bytes (15408 compressed) at 0x00001000 in 0.4 seconds (effective 546.7 kbit/s)... 582 … Wrote 147104 bytes (77364 compressed) at 0x00010000 in 1.9 seconds (effective 615.5 kbit/s)... 610 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 3851.6 kbit/s)... 614 … Wrote 22592 bytes (13483 compressed) at 0x00001000 in 0.3 seconds (effective 595.1 kbit/s)... 622 … Wrote 140048 bytes (70298 compressed) at 0x00010000 in 1.7 seconds (effective 662.5 kbit/s)... 653 … Wrote 18896 bytes (11758 compressed) at 0x00000000 in 0.5 seconds (effective 279.9 kbit/s)... 662 … Wrote 168208 bytes (88178 compressed) at 0x00010000 in 2.4 seconds (effective 569.2 kbit/s)... 666 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 478.9 kbit/s)... 695 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 4238.1 kbit/s)... [all …]
/hal_espressif-3.6.0/examples/openthread/ot_cli/
D	README.md	`82 # After some seconds 112 # After some seconds 128 I (1310225) ot_socket: Socket listening, timeout is 30 seconds 136 I (1339815) ot_socket: Waiting for data, timeout is 30 seconds 167 -i <interval> : seconds between periodic bandwidth reports 168 -t <time> : time in seconds to transmit for (default 10 secs)`
/hal_espressif-3.6.0/examples/cxx/experimental/blink_cxx/main/
D	main.cpp	`30 this_thread::sleep_for(std::chrono::seconds(1)); in app_main() 33 this_thread::sleep_for(std::chrono::seconds(1)); in app_main()`
/hal_espressif-3.6.0/examples/bluetooth/esp_ble_mesh/aligenie_demo/components/vendor_model/
D	genie_timer.c	226 utc.seconds = sec; in convert_unix_to_utc() 247 return ((days * 24 + utc_time->hour) * 60 + utc_time->minutes) * 60 + utc_time->seconds; in convert_utc_to_unix() 315 local_time.seconds++; in seconds_update() 317 if (local_time.seconds == 60) { in seconds_update() 318 local_time.seconds = 0; in seconds_update() 632 utc.seconds = 0; in genie_timer_periodic_start() 710 local_time.hour, local_time.minutes, local_time.seconds, in genie_timer_local_time_show() 786 local_time.hour, local_time.minutes, local_time.seconds, in genie_timer_local_time_update()
/hal_espressif-3.6.0/examples/peripherals/mcpwm/mcpwm_brushed_dc_control/
D	README.md	`80 \| 5. Try 'motor' to start motor in several seconds or stop it \| 102 Running seconds = 10 140 -u, --start=<seconds> Set running seconds for motor, set '0' to keep motor running 167 Running seconds = 10 222 * 'u' - start the motor in <sec> seconds, if <sec> is 0, the motor won't stop until 'motor -d' is i… 227 motor: motor starts to run in 10 seconds`
/hal_espressif-3.6.0/docs/zh_CN/get-started-legacy/
D	index.rst	`335 Wrote 26704 bytes (15930 compressed) at 0x00001000 in 1.4 seconds (effective 151.9 kbit/s)... 338 Wrote 147984 bytes (77738 compressed) at 0x00010000 in 6.9 seconds (effective 172.7 kbit/s)... 341 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 1607.9 kbit/s)... 377 Restarting in 10 seconds... 378 Restarting in 9 seconds... 379 Restarting in 8 seconds... 380 Restarting in 7 seconds...`
/hal_espressif-3.6.0/examples/bluetooth/esp_hid_device/main/
D	esp_hid_gap.c	449 static esp_err_t start_bt_scan(uint32_t seconds) in start_bt_scan() argument 452 …if ((ret = esp_bt_gap_start_discovery(ESP_BT_INQ_MODE_GENERAL_INQUIRY, (int)(seconds / 1.28), 0)) … in start_bt_scan() 576 static esp_err_t start_ble_scan(uint32_t seconds) in start_ble_scan() argument 585 if ((ret = esp_ble_gap_start_scanning(seconds)) != ESP_OK) { in start_ble_scan() 789 esp_err_t esp_hid_scan(uint32_t seconds, size_t num_results, esp_hid_scan_result_t *results) in esp_hid_scan() argument 797 if (start_ble_scan(seconds) == ESP_OK) { in esp_hid_scan() 805 if (start_bt_scan(seconds) == ESP_OK) { in esp_hid_scan()
/hal_espressif-3.6.0/examples/bluetooth/esp_hid_host/main/
D	esp_hid_gap.c	452 static esp_err_t start_bt_scan(uint32_t seconds) in start_bt_scan() argument 455 …if ((ret = esp_bt_gap_start_discovery(ESP_BT_INQ_MODE_GENERAL_INQUIRY, (int)(seconds / 1.28), 0)) … in start_bt_scan() 579 static esp_err_t start_ble_scan(uint32_t seconds) in start_ble_scan() argument 588 if ((ret = esp_ble_gap_start_scanning(seconds)) != ESP_OK) { in start_ble_scan() 792 esp_err_t esp_hid_scan(uint32_t seconds, size_t num_results, esp_hid_scan_result_t *results) in esp_hid_scan() argument 800 if (start_ble_scan(seconds) == ESP_OK) { in esp_hid_scan() 808 if (start_bt_scan(seconds) == ESP_OK) { in esp_hid_scan()
/hal_espressif-3.6.0/examples/cxx/experimental/esp_event_async_cxx/main/
D	esp_event_async_cxx_example.cpp	`84 this_thread::sleep_for(chrono::seconds(1)); in app_main() 106 this_thread::sleep_for(chrono::seconds(1)); in app_main()`
/hal_espressif-3.6.0/examples/network/simple_sniffer/main/
D	cmd_sniffer.c	`57 uint32_t seconds; member 139 packet_info.seconds = sniffer->rx_ctrl.timestamp / 1000000U; in wifi_sniffer_cb() 159 packet_info.seconds = tv_now.tv_sec; in eth_sniffer_cb() 184 if (packet_capture(packet_info.payload, packet_info.length, packet_info.seconds, in sniffer_task()`
D	cmd_pcap.h	`28 esp_err_t packet_capture(void *payload, uint32_t length, uint32_t seconds, uint32_t microseconds);`
/hal_espressif-3.6.0/examples/ethernet/iperf/
D	README.md	62 …un command: `iperf -u -s -i 3` to start iperf server in UDP mode, and report interval is 3 seconds. 63 …iperf -u -c PC_IP -i 3 -t 30` to start iperf client in UDP mode, and the test will last 30 seconds. 106 … to start iperf client in UDP mode with estimated bandwidth 100M, and report interval is 3 seconds. 107 …and: `iperf -u -s -t 30 -i 3` to start iperf server in UDP mode, and the test will last 30 seconds.
/hal_espressif-3.6.0/docs/en/get-started/
D	index.rst	570 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 5962.8 kbit/s)... 574 … Wrote 26096 bytes (15408 compressed) at 0x00001000 in 0.4 seconds (effective 546.7 kbit/s)... 582 … Wrote 147104 bytes (77364 compressed) at 0x00010000 in 1.9 seconds (effective 615.5 kbit/s)... 610 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 3851.6 kbit/s)... 614 … Wrote 22592 bytes (13483 compressed) at 0x00001000 in 0.3 seconds (effective 595.1 kbit/s)... 622 … Wrote 140048 bytes (70298 compressed) at 0x00010000 in 1.7 seconds (effective 662.5 kbit/s)... 653 … Wrote 18896 bytes (11758 compressed) at 0x00000000 in 0.5 seconds (effective 279.9 kbit/s)... 662 … Wrote 168208 bytes (88178 compressed) at 0x00010000 in 2.4 seconds (effective 569.2 kbit/s)... 666 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 478.9 kbit/s)... 695 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 4238.1 kbit/s)... [all …]
/hal_espressif-3.6.0/examples/system/task_watchdog/
D	README.md	`39 Delay for 10 seconds 48 Delay for 10 seconds`
/hal_espressif-3.6.0/examples/bluetooth/esp_ble_mesh/common_components/button/
D	README.md	`8 …* Serial threshold seconds which decides that serial trigger callback will be called after how man…`
/hal_espressif-3.6.0/components/newlib/
D	time.c	`220 unsigned int sleep(unsigned int seconds) in sleep() argument 222 usleep(seconds*1000000UL); in sleep()`
/hal_espressif-3.6.0/components/newlib/test/
D	test_newlib.c	`207 const time_t seconds = 1584039600; variable 210 struct tm *tm = localtime(&seconds);`
/hal_espressif-3.6.0/components/esptool_py/esptool/docs/en/esptool/
D	flashing-firmware.rst	`91 Wrote 25536 bytes (15935 compressed) at 0x00001000 in 0.7 seconds (effective 275.5 kbit/s)... 94 Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 334.1 kbit/s)... 97 Wrote 169232 bytes (89490 compressed) at 0x00010000 in 2.6 seconds (effective 513.0 kbit/s)...`
/hal_espressif-3.6.0/examples/common_components/pcap/include/
D	pcap.h	`112 …packet(pcap_file_handle_t pcap, void *payload, uint32_t length, uint32_t seconds, uint32_t microse…`

12 3 4

TraceRecorderSource-2.7.6
TraceRecorderSource-3.4.0
Zephyr-Core-2.7.6
Zephyr-Core-3.4.0
Zephyr-Core-3.5.0
Zephyr-Core-3.6.0
Zephyr-Core-3.7.0
acpica-3.5.0
acpica-3.6.0
acpica-3.7.0
babblesim_base-3.4.0
babblesim_base-3.6.0-3.5.0
babblesim_base-3.7.0
babblesim_ext_2G4_channel_NtNcable-3.7.0-3.6.0-3.5.0-3.4.0
babblesim_ext_2G4_channel_multiatt-3.4.0
babblesim_ext_2G4_channel_multiatt-3.7.0-3.6.0-3.5.0
babblesim_ext_2G4_device_WLAN_actmod-3.7.0-3.6.0-3.5.0-3.4.0
babblesim_ext_2G4_device_burst_interferer-3.7.0-3.6.0-3.5.0-3.4.0
babblesim_ext_2G4_device_playback-3.6.0-3.5.0-3.4.0
babblesim_ext_2G4_device_playback-3.7.0
babblesim_ext_2G4_libPhyComv1-3.6.0-3.5.0-3.4.0
babblesim_ext_2G4_libPhyComv1-3.7.0
babblesim_ext_2G4_modem_BLE_simple-3.4.0
babblesim_ext_2G4_modem_BLE_simple-3.6.0-3.5.0
babblesim_ext_2G4_modem_BLE_simple-3.7.0
babblesim_ext_2G4_modem_magic-3.6.0-3.5.0-3.4.0
babblesim_ext_2G4_modem_magic-3.7.0
babblesim_ext_2G4_phy_v1-3.4.0
babblesim_ext_2G4_phy_v1-3.6.0-3.5.0
babblesim_ext_2G4_phy_v1-3.7.0
babblesim_ext_libCryptov1-3.7.0-3.6.0-3.5.0-3.4.0
bsim-3.4.0
bsim-3.6.0-3.5.0
bsim-3.7.0
canopennode-2.7.6
canopennode-3.5.0-3.4.0
chre-3.4.0
civetweb-2.7.6
cmsis-2.7.6
cmsis-3.4.0
cmsis-3.5.0
cmsis-3.7.0-3.6.0
cmsis-dsp-3.5.0
cmsis-dsp-3.7.0-3.6.0
cmsis-nn-3.6.0-3.5.0
cmsis-nn-3.7.0
edtt-2.7.6
edtt-3.6.0-3.5.0-3.4.0
edtt-3.7.0
fatfs-2.7.6
fatfs-3.7.0-3.6.0-3.5.0-3.4.0
hal_adi-3.7.0
hal_altera-2.7.6
hal_altera-3.6.0-3.5.0-3.4.0
hal_altera-3.7.0
hal_ambiq-3.5.0
hal_ambiq-3.6.0
hal_ambiq-3.7.0
hal_atmel-2.7.6
hal_atmel-3.5.0-3.4.0
hal_atmel-3.6.0
hal_atmel-3.7.0
hal_cypress-2.7.6
hal_espressif-2.7.6
hal_espressif-3.4.0
hal_espressif-3.5.0
hal_espressif-3.6.0
hal_espressif-3.7.0
hal_ethos_u-3.6.0-3.5.0-3.4.0
hal_ethos_u-3.7.0
hal_gigadevice-3.7.0-3.6.0-3.5.0-3.4.0
hal_infineon-2.7.6
hal_infineon-3.4.0
hal_infineon-3.5.0
hal_infineon-3.6.0
hal_infineon-3.7.0
hal_intel-3.5.0
hal_intel-3.6.0
hal_intel-3.7.0
hal_microchip-2.7.6
hal_microchip-3.6.0-3.5.0-3.4.0
hal_microchip-3.7.0
hal_nordic-2.7.6
hal_nordic-3.4.0
hal_nordic-3.5.0
hal_nordic-3.6.0
hal_nordic-3.7.0
hal_nuvoton-2.7.6
hal_nuvoton-3.4.0
hal_nuvoton-3.5.0
hal_nuvoton-3.6.0
hal_nuvoton-3.7.0
hal_nxp-2.7.6
hal_nxp-3.4.0
hal_nxp-3.5.0
hal_nxp-3.6.0
hal_nxp-3.7.0
hal_openisa-2.7.6
hal_openisa-3.5.0-3.4.0
hal_openisa-3.7.0-3.6.0
hal_quicklogic-3.6.0-3.5.0-3.4.0-2.7.6
hal_quicklogic-3.7.0
hal_renesas-3.4.0
hal_renesas-3.5.0
hal_renesas-3.6.0
hal_renesas-3.7.0
hal_rpi_pico-3.4.0
hal_rpi_pico-3.7.0-3.6.0-3.5.0
hal_silabs-2.7.6
hal_silabs-3.4.0
hal_silabs-3.5.0
hal_silabs-3.6.0
hal_silabs-3.7.0
hal_st-2.7.6
hal_st-3.4.0
hal_st-3.5.0
hal_st-3.6.0
hal_st-3.7.0
hal_stm32-2.7.6
hal_stm32-3.4.0
hal_stm32-3.5.0
hal_stm32-3.6.0
hal_stm32-3.7.0
hal_telink-2.7.6
hal_telink-3.6.0-3.5.0-3.4.0
hal_telink-3.7.0
hal_ti-2.7.6
hal_ti-3.4.0
hal_ti-3.7.0-3.6.0-3.5.0
hal_wurthelektronik-3.5.0-3.4.0
hal_wurthelektronik-3.7.0-3.6.0
hal_xtensa-2.7.6
hal_xtensa-3.4.0
hal_xtensa-3.5.0
hal_xtensa-3.6.0
hal_xtensa-3.7.0
hostap-3.6.0
hostap-3.7.0
liblc3-3.5.0-3.4.0
liblc3-3.7.0-3.6.0
libmetal-2.7.6
libmetal-3.5.0-3.4.0
libmetal-3.6.0
libmetal-3.7.0
littlefs-2.7.6
littlefs-3.5.0-3.4.0
littlefs-3.7.0-3.6.0
loramac-node-2.7.6
loramac-node-3.4.0
loramac-node-3.6.0-3.5.0
loramac-node-3.7.0
lvgl-2.7.6
lvgl-3.4.0
lvgl-3.5.0
lvgl-3.6.0
lvgl-3.7.0
lz4-3.4.0-2.7.6
mbedtls-2.7.6
mbedtls-3.4.0
mbedtls-3.5.0
mbedtls-3.6.0
mbedtls-3.7.0
mcuboot-2.7.6
mcuboot-3.4.0
mcuboot-3.5.0
mcuboot-3.6.0
mcuboot-3.7.0
mcumgr-2.7.6
mipi-sys-t-2.7.6
mipi-sys-t-3.4.0
mipi-sys-t-3.6.0-3.5.0
mipi-sys-t-3.7.0
nanopb-2.7.6
nanopb-3.4.0
net-tools-2.7.6
net-tools-3.4.0
net-tools-3.5.0
net-tools-3.6.0
net-tools-3.7.0
nrf_hw_models-2.7.6
nrf_hw_models-3.4.0
nrf_hw_models-3.5.0
nrf_hw_models-3.6.0
nrf_hw_models-3.7.0
open-amp-2.7.6
open-amp-3.4.0
open-amp-3.5.0
open-amp-3.6.0
open-amp-3.7.0
openthread-2.7.6
openthread-3.4.0
openthread-3.5.0
openthread-3.6.0
openthread-3.7.0
percepio-3.5.0
percepio-3.6.0
percepio-3.7.0
picolibc-3.5.0-3.4.0
picolibc-3.7.0-3.6.0
psa-arch-tests-3.4.0
segger-2.7.6
segger-3.4.0
segger-3.6.0-3.5.0
segger-3.7.0
sof-2.7.6
sof-3.4.0
tf-m-tests-3.4.0
tflite-micro-3.4.0-2.7.6
thrift-3.4.0
tinycbor-2.7.6
tinycrypt-3.6.0-3.5.0-3.4.0-2.7.6
tinycrypt-3.7.0
trusted-firmware-a-3.4.0
trusted-firmware-a-3.6.0-3.5.0
trusted-firmware-a-3.7.0
trusted-firmware-m-3.4.0
trusted-firmware-m-3.5.0
trusted-firmware-m-3.6.0
trusted-firmware-m-3.7.0
uoscore-uedhoc-3.4.0
uoscore-uedhoc-3.5.0
uoscore-uedhoc-3.6.0
uoscore-uedhoc-3.7.0
zcbor-3.5.0-3.4.0
zcbor-3.6.0
zcbor-3.7.0
zscilib-3.4.0