1 /* 2 * SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD 3 * 4 * SPDX-License-Identifier: Apache-2.0 5 */ 6 7 #ifndef _ESP_BLE_MESH_DEFS_H_ 8 #define _ESP_BLE_MESH_DEFS_H_ 9 10 #include <stdint.h> 11 12 #include "mesh_config.h" 13 #include "mesh_common.h" 14 #include "proxy_server.h" 15 #include "provisioner_main.h" 16 17 #ifdef __cplusplus 18 extern "C" { 19 #endif 20 21 /*!< The maximum length of a BLE Mesh message, including Opcode, Payload and TransMIC */ 22 #define ESP_BLE_MESH_SDU_MAX_LEN 384 23 24 /*!< Length of a short Mesh MIC. */ 25 #define ESP_BLE_MESH_MIC_SHORT 4 26 27 /*!< Length of a long Mesh MIC. */ 28 #define ESP_BLE_MESH_MIC_LONG 8 29 30 /*!< The maximum length of a BLE Mesh provisioned node name */ 31 #define ESP_BLE_MESH_NODE_NAME_MAX_LEN 31 32 33 /*!< The maximum length of a BLE Mesh unprovisioned device name */ 34 #define ESP_BLE_MESH_DEVICE_NAME_MAX_LEN DEVICE_NAME_SIZE 35 36 /*!< The maximum length of settings user id */ 37 #define ESP_BLE_MESH_SETTINGS_UID_SIZE 20 38 39 /*!< Invalid settings index */ 40 #define ESP_BLE_MESH_INVALID_SETTINGS_IDX 0xFF 41 42 /*!< Define the BLE Mesh octet 16 bytes size */ 43 #define ESP_BLE_MESH_OCTET16_LEN 16 44 typedef uint8_t esp_ble_mesh_octet16_t[ESP_BLE_MESH_OCTET16_LEN]; 45 46 /*!< Define the BLE Mesh octet 8 bytes size */ 47 #define ESP_BLE_MESH_OCTET8_LEN 8 48 typedef uint8_t esp_ble_mesh_octet8_t[ESP_BLE_MESH_OCTET8_LEN]; 49 50 /*!< Invalid Company ID */ 51 #define ESP_BLE_MESH_CID_NVAL 0xFFFF 52 53 /*!< Special TTL value to request using configured default TTL */ 54 #define ESP_BLE_MESH_TTL_DEFAULT 0xFF 55 56 /*!< Maximum allowed TTL value */ 57 #define ESP_BLE_MESH_TTL_MAX 0x7F 58 59 #define ESP_BLE_MESH_ADDR_UNASSIGNED 0x0000 60 #define ESP_BLE_MESH_ADDR_ALL_NODES 0xFFFF 61 #define ESP_BLE_MESH_ADDR_PROXIES 0xFFFC 62 #define ESP_BLE_MESH_ADDR_FRIENDS 0xFFFD 63 #define ESP_BLE_MESH_ADDR_RELAYS 0xFFFE 64 65 #define ESP_BLE_MESH_KEY_UNUSED 0xFFFF 66 #define ESP_BLE_MESH_KEY_DEV 0xFFFE 67 68 #define ESP_BLE_MESH_KEY_PRIMARY 0x0000 69 #define ESP_BLE_MESH_KEY_ANY 0xFFFF 70 71 /*!< Primary Network Key index */ 72 #define ESP_BLE_MESH_NET_PRIMARY 0x000 73 74 /*!< Relay state value */ 75 #define ESP_BLE_MESH_RELAY_DISABLED 0x00 76 #define ESP_BLE_MESH_RELAY_ENABLED 0x01 77 #define ESP_BLE_MESH_RELAY_NOT_SUPPORTED 0x02 78 79 /*!< Beacon state value */ 80 #define ESP_BLE_MESH_BEACON_DISABLED 0x00 81 #define ESP_BLE_MESH_BEACON_ENABLED 0x01 82 83 /*!< GATT Proxy state value */ 84 #define ESP_BLE_MESH_GATT_PROXY_DISABLED 0x00 85 #define ESP_BLE_MESH_GATT_PROXY_ENABLED 0x01 86 #define ESP_BLE_MESH_GATT_PROXY_NOT_SUPPORTED 0x02 87 88 /*!< Friend state value */ 89 #define ESP_BLE_MESH_FRIEND_DISABLED 0x00 90 #define ESP_BLE_MESH_FRIEND_ENABLED 0x01 91 #define ESP_BLE_MESH_FRIEND_NOT_SUPPORTED 0x02 92 93 /*!< Node identity state value */ 94 #define ESP_BLE_MESH_NODE_IDENTITY_STOPPED 0x00 95 #define ESP_BLE_MESH_NODE_IDENTITY_RUNNING 0x01 96 #define ESP_BLE_MESH_NODE_IDENTITY_NOT_SUPPORTED 0x02 97 98 /*!< Supported features */ 99 #define ESP_BLE_MESH_FEATURE_RELAY BIT(0) 100 #define ESP_BLE_MESH_FEATURE_PROXY BIT(1) 101 #define ESP_BLE_MESH_FEATURE_FRIEND BIT(2) 102 #define ESP_BLE_MESH_FEATURE_LOW_POWER BIT(3) 103 #define ESP_BLE_MESH_FEATURE_ALL_SUPPORTED (ESP_BLE_MESH_FEATURE_RELAY | \ 104 ESP_BLE_MESH_FEATURE_PROXY | \ 105 ESP_BLE_MESH_FEATURE_FRIEND | \ 106 ESP_BLE_MESH_FEATURE_LOW_POWER) 107 108 #define ESP_BLE_MESH_ADDR_IS_UNICAST(addr) ((addr) && (addr) < 0x8000) 109 #define ESP_BLE_MESH_ADDR_IS_GROUP(addr) ((addr) >= 0xC000 && (addr) <= 0xFF00) 110 #define ESP_BLE_MESH_ADDR_IS_VIRTUAL(addr) ((addr) >= 0x8000 && (addr) < 0xC000) 111 #define ESP_BLE_MESH_ADDR_IS_RFU(addr) ((addr) >= 0xFF00 && (addr) <= 0xFFFB) 112 113 #define ESP_BLE_MESH_INVALID_NODE_INDEX 0xFFFF 114 115 /** @def ESP_BLE_MESH_TRANSMIT 116 * 117 * @brief Encode transmission count & interval steps. 118 * 119 * @note For example, ESP_BLE_MESH_TRANSMIT(2, 20) means that the message 120 * will be sent about 90ms(count is 3, step is 1, interval is 30 ms 121 * which includes 10ms of advertising interval random delay). 122 * 123 * @param count Number of retransmissions (first transmission is excluded). 124 * @param int_ms Interval steps in milliseconds. Must be greater than 0 125 * and a multiple of 10. 126 * 127 * @return BLE Mesh transmit value that can be used e.g. for the default 128 * values of the Configuration Model data. 129 */ 130 #define ESP_BLE_MESH_TRANSMIT(count, int_ms) ((count) | (((int_ms / 10) - 1) << 3)) 131 132 /** @def ESP_BLE_MESH_GET_TRANSMIT_COUNT 133 * 134 * @brief Decode transmit count from a transmit value. 135 * 136 * @param transmit Encoded transmit count & interval value. 137 * 138 * @return Transmission count (actual transmissions equal to N + 1). 139 */ 140 #define ESP_BLE_MESH_GET_TRANSMIT_COUNT(transmit) (((transmit) & (uint8_t)BIT_MASK(3))) 141 142 /** @def ESP_BLE_MESH_GET_TRANSMIT_INTERVAL 143 * 144 * @brief Decode transmit interval from a transmit value. 145 * 146 * @param transmit Encoded transmit count & interval value. 147 * 148 * @return Transmission interval in milliseconds. 149 */ 150 #define ESP_BLE_MESH_GET_TRANSMIT_INTERVAL(transmit) ((((transmit) >> 3) + 1) * 10) 151 152 /** @def ESP_BLE_MESH_PUBLISH_TRANSMIT 153 * 154 * @brief Encode Publish Retransmit count & interval steps. 155 * 156 * @param count Number of retransmissions (first transmission is excluded). 157 * @param int_ms Interval steps in milliseconds. Must be greater than 0 158 * and a multiple of 50. 159 * 160 * @return BLE Mesh transmit value that can be used e.g. for the default 161 * values of the Configuration Model data. 162 */ 163 #define ESP_BLE_MESH_PUBLISH_TRANSMIT(count, int_ms) ESP_BLE_MESH_TRANSMIT(count, (int_ms) / 5) 164 165 /** @def ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_COUNT 166 * 167 * @brief Decode Publish Retransmit count from a given value. 168 * 169 * @param transmit Encoded Publish Retransmit count & interval value. 170 * 171 * @return Retransmission count (actual transmissions equal to N + 1). 172 */ 173 #define ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_COUNT(transmit) ESP_BLE_MESH_GET_TRANSMIT_COUNT(transmit) 174 175 /** @def ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_INTERVAL 176 * 177 * @brief Decode Publish Retransmit interval from a given value. 178 * 179 * @param transmit Encoded Publish Retransmit count & interval value. 180 * 181 * @return Transmission interval in milliseconds. 182 */ 183 #define ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_INTERVAL(transmit) ((((transmit) >> 3) + 1) * 50) 184 185 /*!< Callbacks which are not needed to be initialized by users (set with 0 and will be initialized internally) */ 186 typedef uint32_t esp_ble_mesh_cb_t; 187 188 typedef enum { 189 ESP_BLE_MESH_TYPE_PROV_CB, 190 ESP_BLE_MESH_TYPE_OUTPUT_NUM_CB, 191 ESP_BLE_MESH_TYPE_OUTPUT_STR_CB, 192 ESP_BLE_MESH_TYPE_INTPUT_CB, 193 ESP_BLE_MESH_TYPE_LINK_OPEN_CB, 194 ESP_BLE_MESH_TYPE_LINK_CLOSE_CB, 195 ESP_BLE_MESH_TYPE_COMPLETE_CB, 196 ESP_BLE_MESH_TYPE_RESET_CB, 197 } esp_ble_mesh_cb_type_t; 198 199 /*!< This enum value is provisioning authentication oob method */ 200 typedef enum { 201 ESP_BLE_MESH_NO_OOB, 202 ESP_BLE_MESH_STATIC_OOB, 203 ESP_BLE_MESH_OUTPUT_OOB, 204 ESP_BLE_MESH_INPUT_OOB, 205 } esp_ble_mesh_oob_method_t; 206 207 /*!< This enum value is associated with bt_mesh_output_action_t in mesh_main.h */ 208 typedef enum { 209 ESP_BLE_MESH_NO_OUTPUT = 0, 210 ESP_BLE_MESH_BLINK = BIT(0), 211 ESP_BLE_MESH_BEEP = BIT(1), 212 ESP_BLE_MESH_VIBRATE = BIT(2), 213 ESP_BLE_MESH_DISPLAY_NUMBER = BIT(3), 214 ESP_BLE_MESH_DISPLAY_STRING = BIT(4), 215 } esp_ble_mesh_output_action_t; 216 217 /*!< This enum value is associated with bt_mesh_input_action_t in mesh_main.h */ 218 typedef enum { 219 ESP_BLE_MESH_NO_INPUT = 0, 220 ESP_BLE_MESH_PUSH = BIT(0), 221 ESP_BLE_MESH_TWIST = BIT(1), 222 ESP_BLE_MESH_ENTER_NUMBER = BIT(2), 223 ESP_BLE_MESH_ENTER_STRING = BIT(3), 224 } esp_ble_mesh_input_action_t; 225 226 /*!< This enum value is associated with bt_mesh_prov_bearer_t in mesh_main.h */ 227 typedef enum { 228 ESP_BLE_MESH_PROV_ADV = BIT(0), 229 ESP_BLE_MESH_PROV_GATT = BIT(1), 230 } esp_ble_mesh_prov_bearer_t; 231 232 /*!< This enum value is associated with bt_mesh_prov_oob_info_t in mesh_main.h */ 233 typedef enum { 234 ESP_BLE_MESH_PROV_OOB_OTHER = BIT(0), 235 ESP_BLE_MESH_PROV_OOB_URI = BIT(1), 236 ESP_BLE_MESH_PROV_OOB_2D_CODE = BIT(2), 237 ESP_BLE_MESH_PROV_OOB_BAR_CODE = BIT(3), 238 ESP_BLE_MESH_PROV_OOB_NFC = BIT(4), 239 ESP_BLE_MESH_PROV_OOB_NUMBER = BIT(5), 240 ESP_BLE_MESH_PROV_OOB_STRING = BIT(6), 241 /* 7 - 10 are reserved */ 242 ESP_BLE_MESH_PROV_OOB_ON_BOX = BIT(11), 243 ESP_BLE_MESH_PROV_OOB_IN_BOX = BIT(12), 244 ESP_BLE_MESH_PROV_OOB_ON_PAPER = BIT(13), 245 ESP_BLE_MESH_PROV_OOB_IN_MANUAL = BIT(14), 246 ESP_BLE_MESH_PROV_OOB_ON_DEV = BIT(15), 247 } esp_ble_mesh_prov_oob_info_t; 248 249 /*!< Maximum length of value used by Static OOB authentication */ 250 #define ESP_BLE_MESH_PROV_STATIC_OOB_MAX_LEN 16 251 252 /*!< Maximum length of string used by Output OOB authentication */ 253 #define ESP_BLE_MESH_PROV_OUTPUT_OOB_MAX_LEN 8 254 255 /*!< Maximum length of string used by Output OOB authentication */ 256 #define ESP_BLE_MESH_PROV_INPUT_OOB_MAX_LEN 8 257 258 /*!< Macros used to define message opcode */ 259 #define ESP_BLE_MESH_MODEL_OP_1(b0) (b0) 260 #define ESP_BLE_MESH_MODEL_OP_2(b0, b1) (((b0) << 8) | (b1)) 261 #define ESP_BLE_MESH_MODEL_OP_3(b0, cid) ((((b0) << 16) | 0xC00000) | (cid)) 262 263 /*!< This macro is associated with BLE_MESH_MODEL_CB in mesh_access.h */ 264 #define ESP_BLE_MESH_SIG_MODEL(_id, _op, _pub, _user_data) \ 265 { \ 266 .model_id = (_id), \ 267 .op = _op, \ 268 .keys = { [0 ... (CONFIG_BLE_MESH_MODEL_KEY_COUNT - 1)] = \ 269 ESP_BLE_MESH_KEY_UNUSED }, \ 270 .pub = _pub, \ 271 .groups = { [0 ... (CONFIG_BLE_MESH_MODEL_GROUP_COUNT - 1)] = \ 272 ESP_BLE_MESH_ADDR_UNASSIGNED }, \ 273 .user_data = _user_data, \ 274 } 275 276 /*!< This macro is associated with BLE_MESH_MODEL_VND_CB in mesh_access.h */ 277 #define ESP_BLE_MESH_VENDOR_MODEL(_company, _id, _op, _pub, _user_data) \ 278 { \ 279 .vnd.company_id = (_company), \ 280 .vnd.model_id = (_id), \ 281 .op = _op, \ 282 .pub = _pub, \ 283 .keys = { [0 ... (CONFIG_BLE_MESH_MODEL_KEY_COUNT - 1)] = \ 284 ESP_BLE_MESH_KEY_UNUSED }, \ 285 .groups = { [0 ... (CONFIG_BLE_MESH_MODEL_GROUP_COUNT - 1)] = \ 286 ESP_BLE_MESH_ADDR_UNASSIGNED }, \ 287 .user_data = _user_data, \ 288 } 289 290 /** @brief Helper to define a BLE Mesh element within an array. 291 * 292 * In case the element has no SIG or Vendor models, the helper 293 * macro ESP_BLE_MESH_MODEL_NONE can be given instead. 294 * 295 * @note This macro is associated with BLE_MESH_ELEM in mesh_access.h 296 * 297 * @param _loc Location Descriptor. 298 * @param _mods Array of SIG models. 299 * @param _vnd_mods Array of vendor models. 300 */ 301 #define ESP_BLE_MESH_ELEMENT(_loc, _mods, _vnd_mods) \ 302 { \ 303 .location = (_loc), \ 304 .sig_model_count = ARRAY_SIZE(_mods), \ 305 .sig_models = (_mods), \ 306 .vnd_model_count = ARRAY_SIZE(_vnd_mods), \ 307 .vnd_models = (_vnd_mods), \ 308 } 309 310 #define ESP_BLE_MESH_PROV(uuid, sta_val, sta_val_len, out_size, out_act, in_size, in_act) { \ 311 .uuid = uuid, \ 312 .static_val = sta_val, \ 313 .static_val_len = sta_val_len, \ 314 .output_size = out_size, \ 315 .output_action = out_act, \ 316 .input_size = in_size, \ 317 .input_action = in_act, \ 318 } 319 320 typedef uint8_t UINT8; 321 typedef uint16_t UINT16; 322 typedef uint32_t UINT32; 323 typedef uint64_t UINT64; 324 325 #define BT_OCTET32_LEN 32 326 typedef UINT8 BT_OCTET32[BT_OCTET32_LEN]; /* octet array: size 32 */ 327 328 329 #ifndef BD_ADDR_LEN 330 #define BD_ADDR_LEN 6 331 typedef uint8_t BD_ADDR[BD_ADDR_LEN]; 332 #endif 333 334 typedef uint8_t esp_ble_mesh_bd_addr_t[BD_ADDR_LEN]; 335 336 #define ESP_BLE_MESH_ADDR_TYPE_PUBLIC 0x00 337 #define ESP_BLE_MESH_ADDR_TYPE_RANDOM 0x01 338 #define ESP_BLE_MESH_ADDR_TYPE_RPA_PUBLIC 0x02 339 #define ESP_BLE_MESH_ADDR_TYPE_RPA_RANDOM 0x03 340 /// BLE device address type 341 typedef uint8_t esp_ble_mesh_addr_type_t; 342 343 /** BLE Mesh deinit parameters */ 344 typedef struct { 345 bool erase_flash; /*!< Indicate if erasing flash when deinit mesh stack */ 346 } esp_ble_mesh_deinit_param_t; 347 348 typedef struct esp_ble_mesh_model esp_ble_mesh_model_t; 349 350 /** Abstraction that describes a BLE Mesh Element. 351 * This structure is associated with struct bt_mesh_elem in mesh_access.h 352 */ 353 typedef struct { 354 /** Element Address, assigned during provisioning. */ 355 uint16_t element_addr; 356 357 /** Location Descriptor (GATT Bluetooth Namespace Descriptors) */ 358 const uint16_t location; 359 360 const uint8_t sig_model_count; /*!< SIG Model count */ 361 const uint8_t vnd_model_count; /*!< Vendor Model count */ 362 363 esp_ble_mesh_model_t *sig_models; /*!< SIG Models */ 364 esp_ble_mesh_model_t *vnd_models; /*!< Vendor Models */ 365 } esp_ble_mesh_elem_t; 366 367 /** Abstraction that describes a model publication context. 368 * This structure is associated with struct bt_mesh_model_pub in mesh_access.h 369 */ 370 typedef struct { 371 /** Pointer to the model to which the context belongs. Initialized by the stack. */ 372 esp_ble_mesh_model_t *model; 373 374 uint16_t publish_addr; /*!< Publish Address. */ 375 uint16_t app_idx:12, /*!< Publish AppKey Index. */ 376 cred:1, /*!< Friendship Credentials Flag. */ 377 send_rel:1; /*!< Force reliable sending (segment acks) */ 378 379 uint8_t ttl; /*!< Publish Time to Live. */ 380 uint8_t retransmit; /*!< Retransmit Count & Interval Steps. */ 381 382 uint8_t period; /*!< Publish Period. */ 383 uint8_t period_div:4, /*!< Divisor for the Period. */ 384 fast_period:1, /*!< Use FastPeriodDivisor */ 385 count:3; /*!< Retransmissions left. */ 386 387 uint32_t period_start; /*!< Start of the current period. */ 388 389 /** @brief Publication buffer, containing the publication message. 390 * 391 * This will get correctly created when the publication context 392 * has been defined using the ESP_BLE_MESH_MODEL_PUB_DEFINE macro. 393 * 394 * ESP_BLE_MESH_MODEL_PUB_DEFINE(name, size); 395 */ 396 struct net_buf_simple *msg; 397 398 /** Callback used to update publish message. Initialized by the stack. */ 399 esp_ble_mesh_cb_t update; 400 401 /** Publish Period Timer. Initialized by the stack. */ 402 struct k_delayed_work timer; 403 404 /** Role of the device that is going to publish messages */ 405 uint8_t dev_role; 406 } esp_ble_mesh_model_pub_t; 407 408 /** @def ESP_BLE_MESH_MODEL_PUB_DEFINE 409 * 410 * Define a model publication context. 411 * 412 * @param _name Variable name given to the context. 413 * @param _msg_len Length of the publication message. 414 * @param _role Role of the device which contains the model. 415 */ 416 #define ESP_BLE_MESH_MODEL_PUB_DEFINE(_name, _msg_len, _role) \ 417 NET_BUF_SIMPLE_DEFINE_STATIC(bt_mesh_pub_msg_##_name, _msg_len); \ 418 static esp_ble_mesh_model_pub_t _name = { \ 419 .update = (uint32_t)NULL, \ 420 .msg = &bt_mesh_pub_msg_##_name, \ 421 .dev_role = _role, \ 422 } 423 424 /** @def ESP_BLE_MESH_MODEL_OP 425 * 426 * Define a model operation context. 427 * 428 * @param _opcode Message opcode. 429 * @param _min_len Message minimum length. 430 */ 431 #define ESP_BLE_MESH_MODEL_OP(_opcode, _min_len) \ 432 { \ 433 .opcode = _opcode, \ 434 .min_len = _min_len, \ 435 .param_cb = (uint32_t)NULL, \ 436 } 437 438 /** Abstraction that describes a model operation context. 439 * This structure is associated with struct bt_mesh_model_op in mesh_access.h 440 */ 441 typedef struct { 442 const uint32_t opcode; /*!< Message opcode */ 443 const size_t min_len; /*!< Message minimum length */ 444 esp_ble_mesh_cb_t param_cb; /*!< Callback used to handle message. Initialized by the stack. */ 445 } esp_ble_mesh_model_op_t; 446 447 /** Define the terminator for the model operation table. 448 * Each model operation struct array must use this terminator as 449 * the end tag of the operation unit. 450 */ 451 #define ESP_BLE_MESH_MODEL_OP_END {0, 0, 0} 452 453 /** Abstraction that describes a model callback structure. 454 * This structure is associated with struct bt_mesh_model_cb in mesh_access.h. 455 */ 456 typedef struct { 457 /** Callback used during model initialization. Initialized by the stack. */ 458 esp_ble_mesh_cb_t init_cb; 459 460 #if CONFIG_BLE_MESH_DEINIT 461 /** Callback used during model deinitialization. Initialized by the stack. */ 462 esp_ble_mesh_cb_t deinit_cb; 463 #endif /* CONFIG_BLE_MESH_DEINIT */ 464 } esp_ble_mesh_model_cbs_t; 465 466 /** Abstraction that describes a Mesh Model instance. 467 * This structure is associated with struct bt_mesh_model in mesh_access.h 468 */ 469 struct esp_ble_mesh_model { 470 /** Model ID */ 471 union { 472 const uint16_t model_id; /*!< 16-bit model identifier */ 473 struct { 474 uint16_t company_id; /*!< 16-bit company identifier */ 475 uint16_t model_id; /*!< 16-bit model identifier */ 476 } vnd; /*!< Structure encapsulating a model ID with a company ID */ 477 }; 478 479 /** Internal information, mainly for persistent storage */ 480 uint8_t element_idx; /*!< Belongs to Nth element */ 481 uint8_t model_idx; /*!< Is the Nth model in the element */ 482 uint16_t flags; /*!< Information about what has changed */ 483 484 /** The Element to which this Model belongs */ 485 esp_ble_mesh_elem_t *element; 486 487 /** Model Publication */ 488 esp_ble_mesh_model_pub_t *const pub; 489 490 /** AppKey List */ 491 uint16_t keys[CONFIG_BLE_MESH_MODEL_KEY_COUNT]; 492 493 /** Subscription List (group or virtual addresses) */ 494 uint16_t groups[CONFIG_BLE_MESH_MODEL_GROUP_COUNT]; 495 496 /** Model operation context */ 497 esp_ble_mesh_model_op_t *op; 498 499 /** Model callback structure */ 500 esp_ble_mesh_model_cbs_t *cb; 501 502 /** Model-specific user data */ 503 void *user_data; 504 }; 505 506 /** Helper to define an empty model array. 507 * This structure is associated with BLE_MESH_MODEL_NONE in mesh_access.h 508 */ 509 #define ESP_BLE_MESH_MODEL_NONE ((esp_ble_mesh_model_t []){}) 510 511 /** Message sending context. 512 * This structure is associated with struct bt_mesh_msg_ctx in mesh_access.h 513 */ 514 typedef struct { 515 /** NetKey Index of the subnet through which to send the message. */ 516 uint16_t net_idx; 517 518 /** AppKey Index for message encryption. */ 519 uint16_t app_idx; 520 521 /** Remote address. */ 522 uint16_t addr; 523 524 /** Destination address of a received message. Not used for sending. */ 525 uint16_t recv_dst; 526 527 /** RSSI of received packet. Not used for sending. */ 528 int8_t recv_rssi; 529 530 /** Received TTL value. Not used for sending. */ 531 uint8_t recv_ttl: 7; 532 533 /** Force sending reliably by using segment acknowledgement */ 534 uint8_t send_rel: 1; 535 536 /** TTL, or ESP_BLE_MESH_TTL_DEFAULT for default TTL. */ 537 uint8_t send_ttl; 538 539 /** Opcode of a received message. Not used for sending message. */ 540 uint32_t recv_op; 541 542 /** Model corresponding to the message, no need to be initialized before sending message */ 543 esp_ble_mesh_model_t *model; 544 545 /** Indicate if the message is sent by a node server model, no need to be initialized before sending message */ 546 bool srv_send; 547 } esp_ble_mesh_msg_ctx_t; 548 549 /** Provisioning properties & capabilities. 550 * This structure is associated with struct bt_mesh_prov in mesh_access.h 551 */ 552 typedef struct { 553 #if CONFIG_BLE_MESH_NODE 554 /** The UUID that is used when advertising as an unprovisioned device */ 555 const uint8_t *uuid; 556 557 /** Optional URI. This will be advertised separately from the 558 * unprovisioned beacon, however the unprovisioned beacon will 559 * contain a hash of it so the two can be associated by the 560 * provisioner. 561 */ 562 const char *uri; 563 564 /** Out of Band information field. */ 565 esp_ble_mesh_prov_oob_info_t oob_info; 566 567 /* NOTE: In order to avoid suffering brute-forcing attack (CVE-2020-26559). 568 * The Bluetooth SIG recommends that potentially vulnerable mesh provisioners 569 * support an out-of-band mechanism to exchange the public keys. 570 * So as an unprovisioned device, it should enable this flag to support 571 * using an out-of-band mechanism to exchange Public Key. 572 */ 573 /** Flag indicates whether unprovisioned devices support OOB public key */ 574 bool oob_pub_key; 575 576 /** Callback used to notify to set OOB Public Key. Initialized by the stack. */ 577 esp_ble_mesh_cb_t oob_pub_key_cb; 578 579 /** Static OOB value */ 580 const uint8_t *static_val; 581 /** Static OOB value length */ 582 uint8_t static_val_len; 583 584 /** Maximum size of Output OOB supported */ 585 uint8_t output_size; 586 /** Supported Output OOB Actions */ 587 uint16_t output_actions; 588 589 /** Maximum size of Input OOB supported */ 590 uint8_t input_size; 591 /** Supported Input OOB Actions */ 592 uint16_t input_actions; 593 594 /** Callback used to output the number. Initialized by the stack. */ 595 esp_ble_mesh_cb_t output_num_cb; 596 /** Callback used to output the string. Initialized by the stack. */ 597 esp_ble_mesh_cb_t output_str_cb; 598 /** Callback used to notify to input number/string. Initialized by the stack. */ 599 esp_ble_mesh_cb_t input_cb; 600 /** Callback used to indicate that link is opened. Initialized by the stack. */ 601 esp_ble_mesh_cb_t link_open_cb; 602 /** Callback used to indicate that link is closed. Initialized by the stack. */ 603 esp_ble_mesh_cb_t link_close_cb; 604 /** Callback used to indicate that provisioning is completed. Initialized by the stack. */ 605 esp_ble_mesh_cb_t complete_cb; 606 /** Callback used to indicate that node has been reset. Initialized by the stack. */ 607 esp_ble_mesh_cb_t reset_cb; 608 #endif /* CONFIG_BLE_MESH_NODE */ 609 610 #ifdef CONFIG_BLE_MESH_PROVISIONER 611 /** Provisioner device UUID */ 612 const uint8_t *prov_uuid; 613 614 /** Primary element address of the provisioner */ 615 const uint16_t prov_unicast_addr; 616 617 /** Pre-incremental unicast address value to be assigned to the first device */ 618 uint16_t prov_start_address; 619 620 /** Attention timer contained in Provisioning Invite PDU */ 621 uint8_t prov_attention; 622 623 /** Provisioning Algorithm for the Provisioner */ 624 uint8_t prov_algorithm; 625 626 /* NOTE: In order to avoid suffering brute-forcing attack (CVE-2020-26559). 627 * The Bluetooth SIG recommends that potentially vulnerable mesh provisioners 628 * use an out-of-band mechanism to exchange the public keys. 629 */ 630 /** Provisioner public key oob */ 631 uint8_t prov_pub_key_oob; 632 633 /** Callback used to notify to set device OOB Public Key. Initialized by the stack. */ 634 esp_ble_mesh_cb_t provisioner_prov_read_oob_pub_key; 635 636 /* NOTE: The Bluetooth SIG recommends that mesh implementations enforce a randomly 637 * selected AuthValue using all of the available bits, where permitted by the 638 * implementation. A large entropy helps ensure that a brute-force of the AuthValue, 639 * even a static AuthValue, cannot normally be completed in a reasonable time (CVE-2020-26557). 640 * 641 * AuthValues selected using a cryptographically secure random or pseudorandom number 642 * generator and having the maximum permitted entropy (128-bits) will be most difficult 643 * to brute-force. AuthValues with reduced entropy or generated in a predictable manner 644 * will not grant the same level of protection against this vulnerability. Selecting a 645 * new AuthValue with each provisioning attempt can also make it more difficult to launch 646 * a brute-force attack by requiring the attacker to restart the search with each 647 * provisioning attempt (CVE-2020-26556). 648 */ 649 /** Provisioner static oob value */ 650 uint8_t *prov_static_oob_val; 651 /** Provisioner static oob value length */ 652 uint8_t prov_static_oob_len; 653 654 /** Callback used to notify to input number/string. Initialized by the stack. */ 655 esp_ble_mesh_cb_t provisioner_prov_input; 656 /** Callback used to output number/string. Initialized by the stack. */ 657 esp_ble_mesh_cb_t provisioner_prov_output; 658 659 /** Key refresh and IV update flag */ 660 uint8_t flags; 661 662 /** IV index */ 663 uint32_t iv_index; 664 665 /** Callback used to indicate that link is opened. Initialized by the stack. */ 666 esp_ble_mesh_cb_t provisioner_link_open; 667 /** Callback used to indicate that link is closed. Initialized by the stack. */ 668 esp_ble_mesh_cb_t provisioner_link_close; 669 /** Callback used to indicate that a device is provisioned. Initialized by the stack. */ 670 esp_ble_mesh_cb_t provisioner_prov_comp; 671 #endif /* CONFIG_BLE_MESH_PROVISIONER */ 672 } esp_ble_mesh_prov_t; 673 674 /** Node Composition data context. 675 * This structure is associated with struct bt_mesh_comp in mesh_access.h 676 */ 677 typedef struct { 678 uint16_t cid; /*!< 16-bit SIG-assigned company identifier */ 679 uint16_t pid; /*!< 16-bit vendor-assigned product identifier */ 680 uint16_t vid; /*!< 16-bit vendor-assigned product version identifier */ 681 682 size_t element_count; /*!< Element count */ 683 esp_ble_mesh_elem_t *elements; /*!< A sequence of elements */ 684 } esp_ble_mesh_comp_t; 685 686 /*!< This enum value is the role of the device */ 687 typedef enum { 688 ROLE_NODE = 0, 689 ROLE_PROVISIONER, 690 ROLE_FAST_PROV, 691 } esp_ble_mesh_dev_role_t; 692 693 /*!< Flag which will be set when device is going to be added. */ 694 typedef uint8_t esp_ble_mesh_dev_add_flag_t; 695 #define ADD_DEV_RM_AFTER_PROV_FLAG BIT(0) /*!< Device will be removed from queue after provisioned successfully */ 696 #define ADD_DEV_START_PROV_NOW_FLAG BIT(1) /*!< Start provisioning device immediately */ 697 #define ADD_DEV_FLUSHABLE_DEV_FLAG BIT(2) /*!< Device can be remove when queue is full and new device is going to added */ 698 699 /** Information of the device which is going to be added for provisioning. */ 700 typedef struct { 701 esp_ble_mesh_bd_addr_t addr; /*!< Device address */ 702 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 703 uint8_t uuid[16]; /*!< Device UUID */ 704 uint16_t oob_info; /*!< Device OOB Info */ 705 /*!< ADD_DEV_START_PROV_NOW_FLAG shall not be set if the bearer has both PB-ADV and PB-GATT enabled */ 706 esp_ble_mesh_prov_bearer_t bearer; /*!< Provisioning Bearer */ 707 } esp_ble_mesh_unprov_dev_add_t; 708 709 #define DEL_DEV_ADDR_FLAG BIT(0) 710 #define DEL_DEV_UUID_FLAG BIT(1) 711 /** Information of the device which is going to be deleted. */ 712 typedef struct { 713 union { 714 struct { 715 esp_ble_mesh_bd_addr_t addr; /*!< Device address */ 716 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 717 }; 718 uint8_t uuid[16]; /*!< Device UUID */ 719 }; 720 uint8_t flag; /*!< BIT0: device address; BIT1: device UUID */ 721 } esp_ble_mesh_device_delete_t; 722 723 #define PROV_DATA_NET_IDX_FLAG BIT(0) 724 #define PROV_DATA_FLAGS_FLAG BIT(1) 725 #define PROV_DATA_IV_INDEX_FLAG BIT(2) 726 /** Information of the provisioner which is going to be updated. */ 727 typedef struct { 728 union { 729 uint16_t net_idx; /*!< NetKey Index */ 730 uint8_t flags; /*!< Flags */ 731 uint32_t iv_index; /*!< IV Index */ 732 }; 733 uint8_t flag; /*!< BIT0: net_idx; BIT1: flags; BIT2: iv_index */ 734 } esp_ble_mesh_prov_data_info_t; 735 736 /** Information of the provisioned node */ 737 typedef struct { 738 /* Device information */ 739 esp_ble_mesh_bd_addr_t addr; /*!< Node device address */ 740 esp_ble_mesh_addr_type_t addr_type; /*!< Node device address type */ 741 uint8_t dev_uuid[16]; /*!< Device UUID */ 742 uint16_t oob_info; /*!< Node OOB information */ 743 744 /* Provisioning information */ 745 uint16_t unicast_addr; /*!< Node unicast address */ 746 uint8_t element_num; /*!< Node element number */ 747 uint16_t net_idx; /*!< Node NetKey Index */ 748 uint8_t flags; /*!< Node key refresh flag and iv update flag */ 749 uint32_t iv_index; /*!< Node IV Index */ 750 uint8_t dev_key[16]; /*!< Node device key */ 751 752 /* Additional information */ 753 char name[ESP_BLE_MESH_NODE_NAME_MAX_LEN + 1]; /*!< Node name */ 754 uint16_t comp_length; /*!< Length of Composition Data */ 755 uint8_t *comp_data; /*!< Value of Composition Data */ 756 } __attribute__((packed)) esp_ble_mesh_node_t; 757 758 /** Context of fast provisioning which need to be set. */ 759 typedef struct { 760 uint16_t unicast_min; /*!< Minimum unicast address used for fast provisioning */ 761 uint16_t unicast_max; /*!< Maximum unicast address used for fast provisioning */ 762 uint16_t net_idx; /*!< Netkey index used for fast provisioning */ 763 uint8_t flags; /*!< Flags used for fast provisioning */ 764 uint32_t iv_index; /*!< IV Index used for fast provisioning */ 765 uint8_t offset; /*!< Offset of the UUID to be compared */ 766 uint8_t match_len; /*!< Length of the UUID to be compared */ 767 uint8_t match_val[16]; /*!< Value of UUID to be compared */ 768 } esp_ble_mesh_fast_prov_info_t; 769 770 /*!< This enum value is the action of fast provisioning */ 771 typedef enum { 772 FAST_PROV_ACT_NONE, 773 FAST_PROV_ACT_ENTER, 774 FAST_PROV_ACT_SUSPEND, 775 FAST_PROV_ACT_EXIT, 776 FAST_PROV_ACT_MAX, 777 } esp_ble_mesh_fast_prov_action_t; 778 779 /*!< This enum value is the type of proxy filter */ 780 typedef enum { 781 PROXY_FILTER_WHITELIST, 782 PROXY_FILTER_BLACKLIST, 783 } esp_ble_mesh_proxy_filter_type_t; 784 785 /*!< Provisioner heartbeat filter type */ 786 #define ESP_BLE_MESH_HEARTBEAT_FILTER_ACCEPTLIST 0x00 787 #define ESP_BLE_MESH_HEARTBEAT_FILTER_REJECTLIST 0x01 788 789 /*!< Provisioner heartbeat filter operation */ 790 #define ESP_BLE_MESH_HEARTBEAT_FILTER_ADD 0x00 791 #define ESP_BLE_MESH_HEARTBEAT_FILTER_REMOVE 0x01 792 793 /** Context of Provisioner heartbeat filter information to be set */ 794 typedef struct { 795 uint16_t hb_src; /*!< Heartbeat source address (unicast address) */ 796 uint16_t hb_dst; /*!< Heartbeat destination address (unicast address or group address) */ 797 } esp_ble_mesh_heartbeat_filter_info_t; 798 799 /*!< This enum value is the event of node/provisioner/fast provisioning */ 800 typedef enum { 801 ESP_BLE_MESH_PROV_REGISTER_COMP_EVT, /*!< Initialize BLE Mesh provisioning capabilities and internal data information completion event */ 802 ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT, /*!< Set the unprovisioned device name completion event */ 803 ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT, /*!< Enable node provisioning functionality completion event */ 804 ESP_BLE_MESH_NODE_PROV_DISABLE_COMP_EVT, /*!< Disable node provisioning functionality completion event */ 805 ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT, /*!< Establish a BLE Mesh link event */ 806 ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT, /*!< Close a BLE Mesh link event */ 807 ESP_BLE_MESH_NODE_PROV_OOB_PUB_KEY_EVT, /*!< Generate Node input OOB public key event */ 808 ESP_BLE_MESH_NODE_PROV_OUTPUT_NUMBER_EVT, /*!< Generate Node Output Number event */ 809 ESP_BLE_MESH_NODE_PROV_OUTPUT_STRING_EVT, /*!< Generate Node Output String event */ 810 ESP_BLE_MESH_NODE_PROV_INPUT_EVT, /*!< Event requiring the user to input a number or string */ 811 ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT, /*!< Provisioning done event */ 812 ESP_BLE_MESH_NODE_PROV_RESET_EVT, /*!< Provisioning reset event */ 813 ESP_BLE_MESH_NODE_PROV_SET_OOB_PUB_KEY_COMP_EVT, /*!< Node set oob public key completion event */ 814 ESP_BLE_MESH_NODE_PROV_INPUT_NUMBER_COMP_EVT, /*!< Node input number completion event */ 815 ESP_BLE_MESH_NODE_PROV_INPUT_STRING_COMP_EVT, /*!< Node input string completion event */ 816 ESP_BLE_MESH_NODE_PROXY_IDENTITY_ENABLE_COMP_EVT, /*!< Enable BLE Mesh Proxy Identity advertising completion event */ 817 ESP_BLE_MESH_NODE_PROXY_GATT_ENABLE_COMP_EVT, /*!< Enable BLE Mesh GATT Proxy Service completion event */ 818 ESP_BLE_MESH_NODE_PROXY_GATT_DISABLE_COMP_EVT, /*!< Disable BLE Mesh GATT Proxy Service completion event */ 819 ESP_BLE_MESH_NODE_ADD_LOCAL_NET_KEY_COMP_EVT, /*!< Node add NetKey locally completion event */ 820 ESP_BLE_MESH_NODE_ADD_LOCAL_APP_KEY_COMP_EVT, /*!< Node add AppKey locally completion event */ 821 ESP_BLE_MESH_NODE_BIND_APP_KEY_TO_MODEL_COMP_EVT, /*!< Node bind AppKey to model locally completion event */ 822 ESP_BLE_MESH_PROVISIONER_PROV_ENABLE_COMP_EVT, /*!< Provisioner enable provisioning functionality completion event */ 823 ESP_BLE_MESH_PROVISIONER_PROV_DISABLE_COMP_EVT, /*!< Provisioner disable provisioning functionality completion event */ 824 ESP_BLE_MESH_PROVISIONER_RECV_UNPROV_ADV_PKT_EVT, /*!< Provisioner receives unprovisioned device beacon event */ 825 ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_EVT, /*!< Provisioner read unprovisioned device OOB public key event */ 826 ESP_BLE_MESH_PROVISIONER_PROV_INPUT_EVT, /*!< Provisioner input value for provisioning procedure event */ 827 ESP_BLE_MESH_PROVISIONER_PROV_OUTPUT_EVT, /*!< Provisioner output value for provisioning procedure event */ 828 ESP_BLE_MESH_PROVISIONER_PROV_LINK_OPEN_EVT, /*!< Provisioner establish a BLE Mesh link event */ 829 ESP_BLE_MESH_PROVISIONER_PROV_LINK_CLOSE_EVT, /*!< Provisioner close a BLE Mesh link event */ 830 ESP_BLE_MESH_PROVISIONER_PROV_COMPLETE_EVT, /*!< Provisioner provisioning done event */ 831 ESP_BLE_MESH_PROVISIONER_ADD_UNPROV_DEV_COMP_EVT, /*!< Provisioner add a device to the list which contains devices that are waiting/going to be provisioned completion event */ 832 ESP_BLE_MESH_PROVISIONER_PROV_DEV_WITH_ADDR_COMP_EVT, /*!< Provisioner start to provision an unprovisioned device completion event */ 833 ESP_BLE_MESH_PROVISIONER_DELETE_DEV_COMP_EVT, /*!< Provisioner delete a device from the list, close provisioning link with the device completion event */ 834 ESP_BLE_MESH_PROVISIONER_SET_DEV_UUID_MATCH_COMP_EVT, /*!< Provisioner set the value to be compared with part of the unprovisioned device UUID completion event */ 835 ESP_BLE_MESH_PROVISIONER_SET_PROV_DATA_INFO_COMP_EVT, /*!< Provisioner set net_idx/flags/iv_index used for provisioning completion event */ 836 ESP_BLE_MESH_PROVISIONER_SET_STATIC_OOB_VALUE_COMP_EVT, /*!< Provisioner set static oob value used for provisioning completion event */ 837 ESP_BLE_MESH_PROVISIONER_SET_PRIMARY_ELEM_ADDR_COMP_EVT, /*!< Provisioner set unicast address of primary element completion event */ 838 ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_COMP_EVT, /*!< Provisioner read unprovisioned device OOB public key completion event */ 839 ESP_BLE_MESH_PROVISIONER_PROV_INPUT_NUMBER_COMP_EVT, /*!< Provisioner input number completion event */ 840 ESP_BLE_MESH_PROVISIONER_PROV_INPUT_STRING_COMP_EVT, /*!< Provisioner input string completion event */ 841 ESP_BLE_MESH_PROVISIONER_SET_NODE_NAME_COMP_EVT, /*!< Provisioner set node name completion event */ 842 ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_APP_KEY_COMP_EVT, /*!< Provisioner add local app key completion event */ 843 ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_APP_KEY_COMP_EVT, /*!< Provisioner update local app key completion event */ 844 ESP_BLE_MESH_PROVISIONER_BIND_APP_KEY_TO_MODEL_COMP_EVT, /*!< Provisioner bind local model with local app key completion event */ 845 ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_NET_KEY_COMP_EVT, /*!< Provisioner add local network key completion event */ 846 ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_NET_KEY_COMP_EVT, /*!< Provisioner update local network key completion event */ 847 ESP_BLE_MESH_PROVISIONER_STORE_NODE_COMP_DATA_COMP_EVT, /*!< Provisioner store node composition data completion event */ 848 ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_UUID_COMP_EVT, /*!< Provisioner delete node with uuid completion event */ 849 ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_ADDR_COMP_EVT, /*!< Provisioner delete node with unicast address completion event */ 850 ESP_BLE_MESH_PROVISIONER_ENABLE_HEARTBEAT_RECV_COMP_EVT, /*!< Provisioner start to receive heartbeat message completion event */ 851 ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_TYPE_COMP_EVT, /*!< Provisioner set the heartbeat filter type completion event */ 852 ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_INFO_COMP_EVT, /*!< Provisioner set the heartbeat filter information completion event */ 853 ESP_BLE_MESH_PROVISIONER_RECV_HEARTBEAT_MESSAGE_EVT, /*!< Provisioner receive heartbeat message event */ 854 ESP_BLE_MESH_PROVISIONER_DRIECT_ERASE_SETTINGS_COMP_EVT, /*!< Provisioner directly erase settings completion event */ 855 ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_INDEX_COMP_EVT, /*!< Provisioner open settings with index completion event */ 856 ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_UID_COMP_EVT, /*!< Provisioner open settings with user id completion event */ 857 ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_INDEX_COMP_EVT, /*!< Provisioner close settings with index completion event */ 858 ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_UID_COMP_EVT, /*!< Provisioner close settings with user id completion event */ 859 ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_INDEX_COMP_EVT, /*!< Provisioner delete settings with index completion event */ 860 ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_UID_COMP_EVT, /*!< Provisioner delete settings with user id completion event */ 861 ESP_BLE_MESH_SET_FAST_PROV_INFO_COMP_EVT, /*!< Set fast provisioning information (e.g. unicast address range, net_idx, etc.) completion event */ 862 ESP_BLE_MESH_SET_FAST_PROV_ACTION_COMP_EVT, /*!< Set fast provisioning action completion event */ 863 ESP_BLE_MESH_HEARTBEAT_MESSAGE_RECV_EVT, /*!< Receive Heartbeat message event */ 864 ESP_BLE_MESH_LPN_ENABLE_COMP_EVT, /*!< Enable Low Power Node completion event */ 865 ESP_BLE_MESH_LPN_DISABLE_COMP_EVT, /*!< Disable Low Power Node completion event */ 866 ESP_BLE_MESH_LPN_POLL_COMP_EVT, /*!< Low Power Node send Friend Poll completion event */ 867 ESP_BLE_MESH_LPN_FRIENDSHIP_ESTABLISH_EVT, /*!< Low Power Node establishes friendship event */ 868 ESP_BLE_MESH_LPN_FRIENDSHIP_TERMINATE_EVT, /*!< Low Power Node terminates friendship event */ 869 ESP_BLE_MESH_FRIEND_FRIENDSHIP_ESTABLISH_EVT, /*!< Friend Node establishes friendship event */ 870 ESP_BLE_MESH_FRIEND_FRIENDSHIP_TERMINATE_EVT, /*!< Friend Node terminates friendship event */ 871 ESP_BLE_MESH_PROXY_CLIENT_RECV_ADV_PKT_EVT, /*!< Proxy Client receives Network ID advertising packet event */ 872 ESP_BLE_MESH_PROXY_CLIENT_CONNECTED_EVT, /*!< Proxy Client establishes connection successfully event */ 873 ESP_BLE_MESH_PROXY_CLIENT_DISCONNECTED_EVT, /*!< Proxy Client terminates connection successfully event */ 874 ESP_BLE_MESH_PROXY_CLIENT_RECV_FILTER_STATUS_EVT, /*!< Proxy Client receives Proxy Filter Status event */ 875 ESP_BLE_MESH_PROXY_CLIENT_CONNECT_COMP_EVT, /*!< Proxy Client connect completion event */ 876 ESP_BLE_MESH_PROXY_CLIENT_DISCONNECT_COMP_EVT, /*!< Proxy Client disconnect completion event */ 877 ESP_BLE_MESH_PROXY_CLIENT_SET_FILTER_TYPE_COMP_EVT, /*!< Proxy Client set filter type completion event */ 878 ESP_BLE_MESH_PROXY_CLIENT_ADD_FILTER_ADDR_COMP_EVT, /*!< Proxy Client add filter address completion event */ 879 ESP_BLE_MESH_PROXY_CLIENT_REMOVE_FILTER_ADDR_COMP_EVT, /*!< Proxy Client remove filter address completion event */ 880 ESP_BLE_MESH_PROXY_SERVER_CONNECTED_EVT, /*!< Proxy Server establishes connection successfully event */ 881 ESP_BLE_MESH_PROXY_SERVER_DISCONNECTED_EVT, /*!< Proxy Server terminates connection successfully event */ 882 ESP_BLE_MESH_MODEL_SUBSCRIBE_GROUP_ADDR_COMP_EVT, /*!< Local model subscribes group address completion event */ 883 ESP_BLE_MESH_MODEL_UNSUBSCRIBE_GROUP_ADDR_COMP_EVT, /*!< Local model unsubscribes group address completion event */ 884 ESP_BLE_MESH_DEINIT_MESH_COMP_EVT, /*!< De-initialize BLE Mesh stack completion event */ 885 ESP_BLE_MESH_PROV_EVT_MAX, 886 } esp_ble_mesh_prov_cb_event_t; 887 888 /** 889 * @brief BLE Mesh Node/Provisioner callback parameters union 890 */ 891 typedef union { 892 /** 893 * @brief ESP_BLE_MESH_PROV_REGISTER_COMP_EVT 894 */ 895 struct ble_mesh_prov_register_comp_param { 896 int err_code; /*!< Indicate the result of BLE Mesh initialization */ 897 } prov_register_comp; /*!< Event parameter of ESP_BLE_MESH_PROV_REGISTER_COMP_EVT */ 898 /** 899 * @brief ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT 900 */ 901 struct ble_mesh_set_unprov_dev_name_comp_param { 902 int err_code; /*!< Indicate the result of setting BLE Mesh device name */ 903 } node_set_unprov_dev_name_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT */ 904 /** 905 * @brief ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT 906 */ 907 struct ble_mesh_prov_enable_comp_param { 908 int err_code; /*!< Indicate the result of enabling BLE Mesh device */ 909 } node_prov_enable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT */ 910 /** 911 * @brief ESP_BLE_MESH_NODE_PROV_DISABLE_COMP_EVT 912 */ 913 struct ble_mesh_prov_disable_comp_param { 914 int err_code; /*!< Indicate the result of disabling BLE Mesh device */ 915 } node_prov_disable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_DISABLE_COMP_EVT */ 916 /** 917 * @brief ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT 918 */ 919 struct ble_mesh_link_open_evt_param { 920 esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when device link is open */ 921 } node_prov_link_open; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT */ 922 /** 923 * @brief ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT 924 */ 925 struct ble_mesh_link_close_evt_param { 926 esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when device link is closed */ 927 } node_prov_link_close; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT */ 928 /** 929 * @brief ESP_BLE_MESH_NODE_PROV_OUTPUT_NUMBER_EVT 930 */ 931 struct ble_mesh_output_num_evt_param { 932 esp_ble_mesh_output_action_t action; /*!< Action of Output OOB Authentication */ 933 uint32_t number; /*!< Number of Output OOB Authentication */ 934 } node_prov_output_num; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_OUTPUT_NUMBER_EVT */ 935 /** 936 * @brief ESP_BLE_MESH_NODE_PROV_OUTPUT_STRING_EVT 937 */ 938 struct ble_mesh_output_str_evt_param { 939 char string[8]; /*!< String of Output OOB Authentication */ 940 } node_prov_output_str; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_OUTPUT_STRING_EVT */ 941 /** 942 * @brief ESP_BLE_MESH_NODE_PROV_INPUT_EVT 943 */ 944 struct ble_mesh_input_evt_param { 945 esp_ble_mesh_input_action_t action; /*!< Action of Input OOB Authentication */ 946 uint8_t size; /*!< Size of Input OOB Authentication */ 947 } node_prov_input; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_INPUT_EVT */ 948 /** 949 * @brief ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT 950 */ 951 struct ble_mesh_provision_complete_evt_param { 952 uint16_t net_idx; /*!< NetKey Index */ 953 uint8_t net_key[16]; /*!< NetKey */ 954 uint16_t addr; /*!< Primary address */ 955 uint8_t flags; /*!< Flags */ 956 uint32_t iv_index; /*!< IV Index */ 957 } node_prov_complete; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT */ 958 /** 959 * @brief ESP_BLE_MESH_NODE_PROV_RESET_EVT 960 */ 961 struct ble_mesh_provision_reset_param { 962 963 } node_prov_reset; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_RESET_EVT */ 964 /** 965 * @brief ESP_BLE_MESH_NODE_PROV_SET_OOB_PUB_KEY_COMP_EVT 966 */ 967 struct ble_mesh_set_oob_pub_key_comp_param { 968 int err_code; /*!< Indicate the result of setting OOB Public Key */ 969 } node_prov_set_oob_pub_key_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_SET_OOB_PUB_KEY_COMP_EVT */ 970 /** 971 * @brief ESP_BLE_MESH_NODE_PROV_INPUT_NUM_COMP_EVT 972 */ 973 struct ble_mesh_input_number_comp_param { 974 int err_code; /*!< Indicate the result of inputting number */ 975 } node_prov_input_num_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_INPUT_NUM_COMP_EVT */ 976 /** 977 * @brief ESP_BLE_MESH_NODE_PROV_INPUT_STR_COMP_EVT 978 */ 979 struct ble_mesh_input_string_comp_param { 980 int err_code; /*!< Indicate the result of inputting string */ 981 } node_prov_input_str_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_INPUT_STR_COMP_EVT */ 982 /** 983 * @brief ESP_BLE_MESH_NODE_PROXY_IDENTITY_ENABLE_COMP_EVT 984 */ 985 struct ble_mesh_proxy_identity_enable_comp_param { 986 int err_code; /*!< Indicate the result of enabling Mesh Proxy advertising */ 987 } node_proxy_identity_enable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROXY_IDENTITY_ENABLE_COMP_EVT */ 988 /** 989 * @brief ESP_BLE_MESH_NODE_PROXY_GATT_ENABLE_COMP_EVT 990 */ 991 struct ble_mesh_proxy_gatt_enable_comp_param { 992 int err_code; /*!< Indicate the result of enabling Mesh Proxy Service */ 993 } node_proxy_gatt_enable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROXY_GATT_ENABLE_COMP_EVT */ 994 /** 995 * @brief ESP_BLE_MESH_NODE_PROXY_GATT_DISABLE_COMP_EVT 996 */ 997 struct ble_mesh_proxy_gatt_disable_comp_param { 998 int err_code; /*!< Indicate the result of disabling Mesh Proxy Service */ 999 } node_proxy_gatt_disable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROXY_GATT_DISABLE_COMP_EVT */ 1000 /** 1001 * @brief ESP_BLE_MESH_NODE_ADD_LOCAL_NET_KEY_COMP_EVT 1002 */ 1003 struct ble_mesh_node_add_local_net_key_comp_param { 1004 int err_code; /*!< Indicate the result of adding local NetKey by the node */ 1005 uint16_t net_idx; /*!< NetKey Index */ 1006 } node_add_net_key_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_ADD_LOCAL_NET_KEY_COMP_EVT */ 1007 /** 1008 * @brief ESP_BLE_MESH_NODE_ADD_LOCAL_APP_KEY_COMP_EVT 1009 */ 1010 struct ble_mesh_node_add_local_app_key_comp_param { 1011 int err_code; /*!< Indicate the result of adding local AppKey by the node */ 1012 uint16_t net_idx; /*!< NetKey Index */ 1013 uint16_t app_idx; /*!< AppKey Index */ 1014 } node_add_app_key_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_ADD_LOCAL_APP_KEY_COMP_EVT */ 1015 /** 1016 * @brief ESP_BLE_MESH_NODE_BIND_APP_KEY_TO_MODEL_COMP_EVT 1017 */ 1018 struct ble_mesh_node_bind_local_mod_app_comp_param { 1019 int err_code; /*!< Indicate the result of binding AppKey with model by the node */ 1020 uint16_t element_addr; /*!< Element address */ 1021 uint16_t app_idx; /*!< AppKey Index */ 1022 uint16_t company_id; /*!< Company ID */ 1023 uint16_t model_id; /*!< Model ID */ 1024 } node_bind_app_key_to_model_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_BIND_APP_KEY_TO_MODEL_COMP_EVT */ 1025 /** 1026 * @brief ESP_BLE_MESH_PROVISIONER_RECV_UNPROV_ADV_PKT_EVT 1027 */ 1028 struct ble_mesh_provisioner_recv_unprov_adv_pkt_param { 1029 uint8_t dev_uuid[16]; /*!< Device UUID of the unprovisioned device */ 1030 esp_ble_mesh_bd_addr_t addr; /*!< Device address of the unprovisioned device */ 1031 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1032 uint16_t oob_info; /*!< OOB Info of the unprovisioned device */ 1033 uint8_t adv_type; /*!< Avertising type of the unprovisioned device */ 1034 esp_ble_mesh_prov_bearer_t bearer; /*!< Bearer of the unprovisioned device */ 1035 int8_t rssi; /*!< RSSI of the received advertising packet */ 1036 } provisioner_recv_unprov_adv_pkt; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_RECV_UNPROV_ADV_PKT_EVT */ 1037 /** 1038 * @brief ESP_BLE_MESH_PROVISIONER_PROV_ENABLE_COMP_EVT 1039 */ 1040 struct ble_mesh_provisioner_prov_enable_comp_param { 1041 int err_code; /*!< Indicate the result of enabling BLE Mesh Provisioner */ 1042 } provisioner_prov_enable_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_ENABLE_COMP_EVT */ 1043 /** 1044 * @brief ESP_BLE_MESH_PROVISIONER_PROV_DISABLE_COMP_EVT 1045 */ 1046 struct ble_mesh_provisioner_prov_disable_comp_param { 1047 int err_code; /*!< Indicate the result of disabling BLE Mesh Provisioner */ 1048 } provisioner_prov_disable_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_DISABLE_COMP_EVT */ 1049 /** 1050 * @brief ESP_BLE_MESH_PROVISIONER_PROV_LINK_OPEN_EVT 1051 */ 1052 struct ble_mesh_provisioner_link_open_evt_param { 1053 esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when Provisioner link is opened */ 1054 } provisioner_prov_link_open; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_LINK_OPEN_EVT */ 1055 /** 1056 * @brief ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_EVT 1057 */ 1058 struct ble_mesh_provisioner_prov_read_oob_pub_key_evt_param { 1059 uint8_t link_idx; /*!< Index of the provisioning link */ 1060 } provisioner_prov_read_oob_pub_key; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_EVT */ 1061 /** 1062 * @brief ESP_BLE_MESH_PROVISIONER_PROV_INPUT_EVT 1063 */ 1064 struct ble_mesh_provisioner_prov_input_evt_param { 1065 esp_ble_mesh_oob_method_t method; /*!< Method of device Output OOB Authentication */ 1066 esp_ble_mesh_output_action_t action; /*!< Action of device Output OOB Authentication */ 1067 uint8_t size; /*!< Size of device Output OOB Authentication */ 1068 uint8_t link_idx; /*!< Index of the provisioning link */ 1069 } provisioner_prov_input; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_INPUT_EVT */ 1070 /** 1071 * @brief ESP_BLE_MESH_PROVISIONER_PROV_OUTPUT_EVT 1072 */ 1073 struct ble_mesh_provisioner_prov_output_evt_param { 1074 esp_ble_mesh_oob_method_t method; /*!< Method of device Input OOB Authentication */ 1075 esp_ble_mesh_input_action_t action; /*!< Action of device Input OOB Authentication */ 1076 uint8_t size; /*!< Size of device Input OOB Authentication */ 1077 uint8_t link_idx; /*!< Index of the provisioning link */ 1078 union { 1079 char string[8]; /*!< String output by the Provisioner */ 1080 uint32_t number; /*!< Number output by the Provisioner */ 1081 }; 1082 } provisioner_prov_output; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_OUTPUT_EVT */ 1083 /** 1084 * @brief ESP_BLE_MESH_PROVISIONER_PROV_LINK_CLOSE_EVT 1085 */ 1086 struct ble_mesh_provisioner_link_close_evt_param { 1087 esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when Provisioner link is closed */ 1088 uint8_t reason; /*!< Reason of the closed provisioning link */ 1089 } provisioner_prov_link_close; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_LINK_CLOSE_EVT */ 1090 /** 1091 * @brief ESP_BLE_MESH_PROVISIONER_PROV_COMPLETE_EVT 1092 */ 1093 struct ble_mesh_provisioner_prov_comp_param { 1094 uint16_t node_idx; /*!< Index of the provisioned device */ 1095 esp_ble_mesh_octet16_t device_uuid; /*!< Device UUID of the provisioned device */ 1096 uint16_t unicast_addr; /*!< Primary address of the provisioned device */ 1097 uint8_t element_num; /*!< Element count of the provisioned device */ 1098 uint16_t netkey_idx; /*!< NetKey Index of the provisioned device */ 1099 } provisioner_prov_complete; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_COMPLETE_EVT */ 1100 /** 1101 * @brief ESP_BLE_MESH_PROVISIONER_ADD_UNPROV_DEV_COMP_EVT 1102 */ 1103 struct ble_mesh_provisioner_add_unprov_dev_comp_param { 1104 int err_code; /*!< Indicate the result of adding device into queue by the Provisioner */ 1105 } provisioner_add_unprov_dev_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_ADD_UNPROV_DEV_COMP_EVT */ 1106 /** 1107 * @brief ESP_BLE_MESH_PROVISIONER_PROV_DEV_WITH_ADDR_COMP_EVT 1108 */ 1109 struct ble_mesh_provisioner_prov_dev_with_addr_comp_param { 1110 int err_code; /*!< Indicate the result of Provisioner starting to provision a device */ 1111 } provisioner_prov_dev_with_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_DEV_WITH_ADDR_COMP_EVT */ 1112 /** 1113 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_DEV_COMP_EVT 1114 */ 1115 struct ble_mesh_provisioner_delete_dev_comp_param { 1116 int err_code; /*!< Indicate the result of deleting device by the Provisioner */ 1117 } provisioner_delete_dev_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_DEV_COMP_EVT */ 1118 /** 1119 * @brief ESP_BLE_MESH_PROVISIONER_SET_DEV_UUID_MATCH_COMP_EVT 1120 */ 1121 struct ble_mesh_provisioner_set_dev_uuid_match_comp_param { 1122 int err_code; /*!< Indicate the result of setting Device UUID match value by the Provisioner */ 1123 } provisioner_set_dev_uuid_match_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_DEV_UUID_MATCH_COMP_EVT */ 1124 /** 1125 * @brief ESP_BLE_MESH_PROVISIONER_SET_PROV_DATA_INFO_COMP_EVT 1126 */ 1127 struct ble_mesh_provisioner_set_prov_data_info_comp_param { 1128 int err_code; /*!< Indicate the result of setting provisioning info by the Provisioner */ 1129 } provisioner_set_prov_data_info_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_PROV_DATA_INFO_COMP_EVT */ 1130 /** 1131 * @brief ESP_BLE_MESH_PROVISIONER_SET_STATIC_OOB_VALUE_COMP_EVT 1132 */ 1133 struct ble_mesh_provisioner_set_static_oob_val_comp_param { 1134 int err_code; /*!< Indicate the result of setting static oob value by the Provisioner */ 1135 } provisioner_set_static_oob_val_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_STATIC_OOB_VALUE_COMP_EVT */ 1136 /** 1137 * @brief ESP_BLE_MESH_PROVISIONER_SET_PRIMARY_ELEM_ADDR_COMP_EVT 1138 */ 1139 struct ble_mesh_provisioner_set_primary_elem_addr_comp_param { 1140 int err_code; /*!< Indicate the result of setting unicast address of primary element by the Provisioner */ 1141 } provisioner_set_primary_elem_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_PRIMARY_ELEM_ADDR_COMP_EVT */ 1142 /** 1143 * @brief ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_COMP_EVT 1144 */ 1145 struct ble_mesh_provisioner_prov_read_oob_pub_key_comp_param { 1146 int err_code; /*!< Indicate the result of setting OOB Public Key by the Provisioner */ 1147 } provisioner_prov_read_oob_pub_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_COMP_EVT */ 1148 /** 1149 * @brief ESP_BLE_MESH_PROVISIONER_PROV_INPUT_NUMBER_COMP_EVT 1150 */ 1151 struct ble_mesh_provisioner_prov_input_num_comp_param { 1152 int err_code; /*!< Indicate the result of inputting number by the Provisioner */ 1153 } provisioner_prov_input_num_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_INPUT_NUMBER_COMP_EVT */ 1154 /** 1155 * @brief ESP_BLE_MESH_PROVISIONER_PROV_INPUT_STRING_COMP_EVT 1156 */ 1157 struct ble_mesh_provisioner_prov_input_str_comp_param { 1158 int err_code; /*!< Indicate the result of inputting string by the Provisioner */ 1159 } provisioner_prov_input_str_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_INPUT_STRING_COMP_EVT */ 1160 /** 1161 * @brief ESP_BLE_MESH_PROVISIONER_SET_NODE_NAME_COMP_EVT 1162 */ 1163 struct ble_mesh_provisioner_set_node_name_comp_param { 1164 int err_code; /*!< Indicate the result of setting provisioned device name by the Provisioner */ 1165 uint16_t node_index; /*!< Index of the provisioned device */ 1166 } provisioner_set_node_name_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_NODE_NAME_COMP_EVT */ 1167 /** 1168 * @brief ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_APP_KEY_COMP_EVT 1169 */ 1170 struct ble_mesh_provisioner_add_local_app_key_comp_param { 1171 int err_code; /*!< Indicate the result of adding local AppKey by the Provisioner */ 1172 uint16_t net_idx; /*!< NetKey Index */ 1173 uint16_t app_idx; /*!< AppKey Index */ 1174 } provisioner_add_app_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_APP_KEY_COMP_EVT */ 1175 /** 1176 * @brief ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_APP_KEY_COMP_EVT 1177 */ 1178 struct ble_mesh_provisioner_update_local_app_key_comp_param { 1179 int err_code; /*!< Indicate the result of updating local AppKey by the Provisioner */ 1180 uint16_t net_idx; /*!< NetKey Index */ 1181 uint16_t app_idx; /*!< AppKey Index */ 1182 } provisioner_update_app_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_APP_KEY_COMP_EVT */ 1183 /** 1184 * @brief ESP_BLE_MESH_PROVISIONER_BIND_APP_KEY_TO_MODEL_COMP_EVT 1185 */ 1186 struct ble_mesh_provisioner_bind_local_mod_app_comp_param { 1187 int err_code; /*!< Indicate the result of binding AppKey with model by the Provisioner */ 1188 uint16_t element_addr; /*!< Element address */ 1189 uint16_t app_idx; /*!< AppKey Index */ 1190 uint16_t company_id; /*!< Company ID */ 1191 uint16_t model_id; /*!< Model ID */ 1192 } provisioner_bind_app_key_to_model_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_BIND_APP_KEY_TO_MODEL_COMP_EVT */ 1193 /** 1194 * @brief ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_NET_KEY_COMP_EVT 1195 */ 1196 struct ble_mesh_provisioner_add_local_net_key_comp_param { 1197 int err_code; /*!< Indicate the result of adding local NetKey by the Provisioner */ 1198 uint16_t net_idx; /*!< NetKey Index */ 1199 } provisioner_add_net_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_NET_KEY_COMP_EVT */ 1200 /** 1201 * @brief ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_NET_KEY_COMP_EVT 1202 */ 1203 struct ble_mesh_provisioner_update_local_net_key_comp_param { 1204 int err_code; /*!< Indicate the result of updating local NetKey by the Provisioner */ 1205 uint16_t net_idx; /*!< NetKey Index */ 1206 } provisioner_update_net_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_NET_KEY_COMP_EVT */ 1207 /** 1208 * @brief ESP_BLE_MESH_PROVISIONER_STORE_NODE_COMP_DATA_COMP_EVT 1209 */ 1210 struct ble_mesh_provisioner_store_node_comp_data_comp_param { 1211 int err_code; /*!< Indicate the result of storing node composition data by the Provisioner */ 1212 uint16_t addr; /*!< Node element address */ 1213 } provisioner_store_node_comp_data_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_STORE_NODE_COMP_DATA_COMP_EVT */ 1214 /** 1215 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_UUID_COMP_EVT 1216 */ 1217 struct ble_mesh_provisioner_delete_node_with_uuid_comp_param { 1218 int err_code; /*!< Indicate the result of deleting node with uuid by the Provisioner */ 1219 uint8_t uuid[16]; /*!< Node device uuid */ 1220 } provisioner_delete_node_with_uuid_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_UUID_COMP_EVT */ 1221 /** 1222 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_ADDR_COMP_EVT 1223 */ 1224 struct ble_mesh_provisioner_delete_node_with_addr_comp_param { 1225 int err_code; /*!< Indicate the result of deleting node with unicast address by the Provisioner */ 1226 uint16_t unicast_addr; /*!< Node unicast address */ 1227 } provisioner_delete_node_with_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_ADDR_COMP_EVT */ 1228 /** 1229 * @brief ESP_BLE_MESH_PROVISIONER_ENABLE_HEARTBEAT_RECV_COMP_EVT 1230 */ 1231 struct { 1232 int err_code; /*!< Indicate the result of enabling/disabling to receive heartbeat messages by the Provisioner */ 1233 bool enable; /*!< Indicate enabling or disabling receiving heartbeat messages */ 1234 } provisioner_enable_heartbeat_recv_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_ENABLE_HEARTBEAT_RECV_COMP_EVT */ 1235 /** 1236 * @brief ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_TYPE_COMP_EVT 1237 */ 1238 struct { 1239 int err_code; /*!< Indicate the result of setting the heartbeat filter type by the Provisioner */ 1240 uint8_t type; /*!< Type of the filter used for receiving heartbeat messages */ 1241 } provisioner_set_heartbeat_filter_type_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_TYPE_COMP_EVT */ 1242 /** 1243 * @brief ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_INFO_COMP_EVT 1244 */ 1245 struct { 1246 int err_code; /*!< Indicate the result of setting the heartbeat filter address by the Provisioner */ 1247 uint8_t op; /*!< Operation (add, remove, clean) */ 1248 uint16_t hb_src; /*!< Heartbeat source address */ 1249 uint16_t hb_dst; /*!< Heartbeat destination address */ 1250 } provisioner_set_heartbeat_filter_info_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_INFO_COMP_EVT */ 1251 /** 1252 * @brief ESP_BLE_MESH_PROVISIONER_RECV_HEARTBEAT_MESSAGE_EVT 1253 */ 1254 struct { 1255 uint16_t hb_src; /*!< Heartbeat source address */ 1256 uint16_t hb_dst; /*!< Heartbeat destination address */ 1257 uint8_t init_ttl; /*!< Heartbeat InitTTL */ 1258 uint8_t rx_ttl; /*!< Heartbeat RxTTL */ 1259 uint8_t hops; /*!< Heartbeat hops (InitTTL - RxTTL + 1) */ 1260 uint16_t feature; /*!< Bit field of currently active features of the node */ 1261 int8_t rssi; /*!< RSSI of the heartbeat message */ 1262 } provisioner_recv_heartbeat; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_RECV_HEARTBEAT_MESSAGE_EVT */ 1263 /** 1264 * @brief ESP_BLE_MESH_PROVISIONER_DRIECT_ERASE_SETTINGS_COMP_EVT 1265 */ 1266 struct { 1267 int err_code; /*!< Indicate the result of directly erasing settings by the Provisioner */ 1268 } provisioner_direct_erase_settings_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_DRIECT_ERASE_SETTINGS_COMP_EVT */ 1269 /** 1270 * @brief ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_INDEX_COMP_EVT 1271 */ 1272 struct { 1273 int err_code; /*!< Indicate the result of opening settings with index by the Provisioner */ 1274 uint8_t index; /*!< Index of Provisioner settings */ 1275 } provisioner_open_settings_with_index_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_INDEX_COMP_EVT */ 1276 /** 1277 * @brief ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_UID_COMP_EVT 1278 */ 1279 struct { 1280 int err_code; /*!< Indicate the result of opening settings with user id by the Provisioner */ 1281 uint8_t index; /*!< Index of Provisioner settings */ 1282 char uid[ESP_BLE_MESH_SETTINGS_UID_SIZE + 1]; /*!< Provisioner settings user id */ 1283 } provisioner_open_settings_with_uid_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_UID_COMP_EVT */ 1284 /** 1285 * @brief ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_INDEX_COMP_EVT 1286 */ 1287 struct { 1288 int err_code; /*!< Indicate the result of closing settings with index by the Provisioner */ 1289 uint8_t index; /*!< Index of Provisioner settings */ 1290 } provisioner_close_settings_with_index_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_INDEX_COMP_EVT */ 1291 /** 1292 * @brief ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_UID_COMP_EVT 1293 */ 1294 struct { 1295 int err_code; /*!< Indicate the result of closing settings with user id by the Provisioner */ 1296 uint8_t index; /*!< Index of Provisioner settings */ 1297 char uid[ESP_BLE_MESH_SETTINGS_UID_SIZE + 1]; /*!< Provisioner settings user id */ 1298 } provisioner_close_settings_with_uid_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_UID_COMP_EVT */ 1299 /** 1300 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_INDEX_COMP_EVT 1301 */ 1302 struct { 1303 int err_code; /*!< Indicate the result of deleting settings with index by the Provisioner */ 1304 uint8_t index; /*!< Index of Provisioner settings */ 1305 } provisioner_delete_settings_with_index_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_INDEX_COMP_EVT */ 1306 /** 1307 * @brief ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_UID_COMP_EVT 1308 */ 1309 struct { 1310 int err_code; /*!< Indicate the result of deleting settings with user id by the Provisioner */ 1311 uint8_t index; /*!< Index of Provisioner settings */ 1312 char uid[ESP_BLE_MESH_SETTINGS_UID_SIZE + 1]; /*!< Provisioner settings user id */ 1313 } provisioner_delete_settings_with_uid_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_UID_COMP_EVT */ 1314 /** 1315 * @brief ESP_BLE_MESH_SET_FAST_PROV_INFO_COMP_EVT 1316 */ 1317 struct ble_mesh_set_fast_prov_info_comp_param { 1318 uint8_t status_unicast; /*!< Indicate the result of setting unicast address range of fast provisioning */ 1319 uint8_t status_net_idx; /*!< Indicate the result of setting NetKey Index of fast provisioning */ 1320 uint8_t status_match; /*!< Indicate the result of setting matching Device UUID of fast provisioning */ 1321 } set_fast_prov_info_comp; /*!< Event parameter of ESP_BLE_MESH_SET_FAST_PROV_INFO_COMP_EVT */ 1322 /** 1323 * @brief ESP_BLE_MESH_SET_FAST_PROV_ACTION_COMP_EVT 1324 */ 1325 struct ble_mesh_set_fast_prov_action_comp_param { 1326 uint8_t status_action; /*!< Indicate the result of setting action of fast provisioning */ 1327 } set_fast_prov_action_comp; /*!< Event parameter of ESP_BLE_MESH_SET_FAST_PROV_ACTION_COMP_EVT */ 1328 /** 1329 * @brief ESP_BLE_MESH_HEARTBEAT_MESSAGE_RECV_EVT 1330 */ 1331 struct ble_mesh_heartbeat_msg_recv_param { 1332 uint8_t hops; /*!< Heartbeat hops (InitTTL - RxTTL + 1) */ 1333 uint16_t feature; /*!< Bit field of currently active features of the node */ 1334 } heartbeat_msg_recv; /*!< Event parameter of ESP_BLE_MESH_HEARTBEAT_MESSAGE_RECV_EVT */ 1335 /** 1336 * @brief ESP_BLE_MESH_LPN_ENABLE_COMP_EVT 1337 */ 1338 struct ble_mesh_lpn_enable_comp_param { 1339 int err_code; /*!< Indicate the result of enabling LPN functionality */ 1340 } lpn_enable_comp; /*!< Event parameter of ESP_BLE_MESH_LPN_ENABLE_COMP_EVT */ 1341 /** 1342 * @brief ESP_BLE_MESH_LPN_DISABLE_COMP_EVT 1343 */ 1344 struct ble_mesh_lpn_disable_comp_param { 1345 int err_code; /*!< Indicate the result of disabling LPN functionality */ 1346 } lpn_disable_comp; /*!< Event parameter of ESP_BLE_MESH_LPN_DISABLE_COMP_EVT */ 1347 /** 1348 * @brief ESP_BLE_MESH_LPN_POLL_COMP_EVT 1349 */ 1350 struct ble_mesh_lpn_poll_comp_param { 1351 int err_code; /*!< Indicate the result of sending Friend Poll */ 1352 } lpn_poll_comp; /*!< Event parameter of ESP_BLE_MESH_LPN_POLL_COMP_EVT */ 1353 /** 1354 * @brief ESP_BLE_MESH_LPN_FRIENDSHIP_ESTABLISH_EVT 1355 */ 1356 struct ble_mesh_lpn_friendship_establish_param { 1357 uint16_t friend_addr; /*!< Friend Node unicast address */ 1358 } lpn_friendship_establish; /*!< Event parameter of ESP_BLE_MESH_LPN_FRIENDSHIP_ESTABLISH_EVT */ 1359 /** 1360 * @brief ESP_BLE_MESH_LPN_FRIENDSHIP_TERMINATE_EVT 1361 */ 1362 struct ble_mesh_lpn_friendship_terminate_param { 1363 uint16_t friend_addr; /*!< Friend Node unicast address */ 1364 } lpn_friendship_terminate; /*!< Event parameter of ESP_BLE_MESH_LPN_FRIENDSHIP_TERMINATE_EVT */ 1365 /** 1366 * @brief ESP_BLE_MESH_FRIEND_FRIENDSHIP_ESTABLISH_EVT 1367 */ 1368 struct ble_mesh_friend_friendship_establish_param { 1369 uint16_t lpn_addr; /*!< Low Power Node unicast address */ 1370 } frnd_friendship_establish; /*!< Event parameter of ESP_BLE_MESH_FRIEND_FRIENDSHIP_ESTABLISH_EVT */ 1371 /** 1372 * @brief ESP_BLE_MESH_FRIEND_FRIENDSHIP_TERMINATE_EVT 1373 */ 1374 struct ble_mesh_friend_friendship_terminate_param { 1375 uint16_t lpn_addr; /*!< Low Power Node unicast address */ 1376 /** This enum value is the reason of friendship termination on the friend node side */ 1377 enum { 1378 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_ESTABLISH_FAIL, /*!< Friend Offer has been sent, but Friend Offer is not received within 1 second, friendship fails to be established */ 1379 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_POLL_TIMEOUT, /*!< Friendship is established, PollTimeout timer expires and no Friend Poll/Sub Add/Sub Remove is received */ 1380 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_RECV_FRND_REQ, /*!< Receive Friend Request from existing Low Power Node */ 1381 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_RECV_FRND_CLEAR, /*!< Receive Friend Clear from other friend node */ 1382 ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_DISABLE, /*!< Friend feature disabled or corresponding NetKey is deleted */ 1383 } reason; /*!< Friendship terminated reason */ 1384 } frnd_friendship_terminate; /*!< Event parameter of ESP_BLE_MESH_FRIEND_FRIENDSHIP_TERMINATE_EVT */ 1385 /** 1386 * @brief ESP_BLE_MESH_PROXY_CLIENT_RECV_ADV_PKT_EVT 1387 */ 1388 struct ble_mesh_proxy_client_recv_adv_pkt_param { 1389 esp_ble_mesh_bd_addr_t addr; /*!< Device address */ 1390 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1391 uint16_t net_idx; /*!< Network ID related NetKey Index */ 1392 uint8_t net_id[8]; /*!< Network ID contained in the advertising packet */ 1393 int8_t rssi; /*!< RSSI of the received advertising packet */ 1394 } proxy_client_recv_adv_pkt; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_RECV_ADV_PKT_EVT */ 1395 /** 1396 * @brief ESP_BLE_MESH_PROXY_CLIENT_CONNECTED_EVT 1397 */ 1398 struct ble_mesh_proxy_client_connected_param { 1399 esp_ble_mesh_bd_addr_t addr; /*!< Device address of the Proxy Server */ 1400 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1401 uint8_t conn_handle; /*!< Proxy connection handle */ 1402 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1403 } proxy_client_connected; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_CONNECTED_EVT */ 1404 /** 1405 * @brief ESP_BLE_MESH_PROXY_CLIENT_DISCONNECTED_EVT 1406 */ 1407 struct ble_mesh_proxy_client_disconnected_param { 1408 esp_ble_mesh_bd_addr_t addr; /*!< Device address of the Proxy Server */ 1409 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1410 uint8_t conn_handle; /*!< Proxy connection handle */ 1411 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1412 uint8_t reason; /*!< Proxy disconnect reason */ 1413 } proxy_client_disconnected; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_DISCONNECTED_EVT */ 1414 /** 1415 * @brief ESP_BLE_MESH_PROXY_CLIENT_RECV_FILTER_STATUS_EVT 1416 */ 1417 struct ble_mesh_proxy_client_recv_filter_status_param { 1418 uint8_t conn_handle; /*!< Proxy connection handle */ 1419 uint16_t server_addr; /*!< Proxy Server primary element address */ 1420 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1421 uint8_t filter_type; /*!< Proxy Server filter type(whitelist or blacklist) */ 1422 uint16_t list_size; /*!< Number of addresses in the Proxy Server filter list */ 1423 } proxy_client_recv_filter_status; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_RECV_FILTER_STATUS_EVT */ 1424 /** 1425 * @brief ESP_BLE_MESH_PROXY_CLIENT_CONNECT_COMP_EVT 1426 */ 1427 struct ble_mesh_proxy_client_connect_comp_param { 1428 int err_code; /*!< Indicate the result of Proxy Client connect */ 1429 esp_ble_mesh_bd_addr_t addr; /*!< Device address of the Proxy Server */ 1430 esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */ 1431 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1432 } proxy_client_connect_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_CONNECT_COMP_EVT */ 1433 /** 1434 * @brief ESP_BLE_MESH_PROXY_CLIENT_DISCONNECT_COMP_EVT 1435 */ 1436 struct ble_mesh_proxy_client_disconnect_comp_param { 1437 int err_code; /*!< Indicate the result of Proxy Client disconnect */ 1438 uint8_t conn_handle; /*!< Proxy connection handle */ 1439 } proxy_client_disconnect_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_DISCONNECT_COMP_EVT */ 1440 /** 1441 * @brief ESP_BLE_MESH_PROXY_CLIENT_SET_FILTER_TYPE_COMP_EVT 1442 */ 1443 struct ble_mesh_proxy_client_set_filter_type_comp_param { 1444 int err_code; /*!< Indicate the result of Proxy Client set filter type */ 1445 uint8_t conn_handle; /*!< Proxy connection handle */ 1446 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1447 } proxy_client_set_filter_type_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_SET_FILTER_TYPE_COMP_EVT */ 1448 /** 1449 * @brief ESP_BLE_MESH_PROXY_CLIENT_ADD_FILTER_ADDR_COMP_EVT 1450 */ 1451 struct ble_mesh_proxy_client_add_filter_addr_comp_param { 1452 int err_code; /*!< Indicate the result of Proxy Client add filter address */ 1453 uint8_t conn_handle; /*!< Proxy connection handle */ 1454 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1455 } proxy_client_add_filter_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_ADD_FILTER_ADDR_COMP_EVT */ 1456 /** 1457 * @brief ESP_BLE_MESH_PROXY_CLIENT_REMOVE_FILTER_ADDR_COMP_EVT 1458 */ 1459 struct ble_mesh_proxy_client_remove_filter_addr_comp_param { 1460 int err_code; /*!< Indicate the result of Proxy Client remove filter address */ 1461 uint8_t conn_handle; /*!< Proxy connection handle */ 1462 uint16_t net_idx; /*!< Corresponding NetKey Index */ 1463 } proxy_client_remove_filter_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_REMOVE_FILTER_ADDR_COMP_EVT */ 1464 /** 1465 * @brief ESP_BLE_MESH_PROXY_SERVER_CONNECTED_EVT 1466 */ 1467 struct ble_mesh_proxy_server_connected_param { 1468 uint8_t conn_handle; /*!< Proxy connection handle */ 1469 } proxy_server_connected; /*!< Event parameter of ESP_BLE_MESH_PROXY_SERVER_CONNECTED_EVT */ 1470 /** 1471 * @brief ESP_BLE_MESH_PROXY_SERVER_DISCONNECTED_EVT 1472 */ 1473 struct ble_mesh_proxy_server_disconnected_param { 1474 uint8_t conn_handle; /*!< Proxy connection handle */ 1475 uint8_t reason; /*!< Proxy disconnect reason */ 1476 } proxy_server_disconnected; /*!< Event parameter of ESP_BLE_MESH_PROXY_SERVER_DISCONNECTED_EVT */ 1477 /** 1478 * @brief ESP_BLE_MESH_MODEL_SUBSCRIBE_GROUP_ADDR_COMP_EVT 1479 */ 1480 struct ble_mesh_model_sub_group_addr_comp_param { 1481 int err_code; /*!< Indicate the result of local model subscribing group address */ 1482 uint16_t element_addr; /*!< Element address */ 1483 uint16_t company_id; /*!< Company ID */ 1484 uint16_t model_id; /*!< Model ID */ 1485 uint16_t group_addr; /*!< Group Address */ 1486 } model_sub_group_addr_comp; /*!< Event parameters of ESP_BLE_MESH_MODEL_SUBSCRIBE_GROUP_ADDR_COMP_EVT */ 1487 /** 1488 * @brief ESP_BLE_MESH_MODEL_UNSUBSCRIBE_GROUP_ADDR_COMP_EVT 1489 */ 1490 struct ble_mesh_model_unsub_group_addr_comp_param { 1491 int err_code; /*!< Indicate the result of local model unsubscribing group address */ 1492 uint16_t element_addr; /*!< Element address */ 1493 uint16_t company_id; /*!< Company ID */ 1494 uint16_t model_id; /*!< Model ID */ 1495 uint16_t group_addr; /*!< Group Address */ 1496 } model_unsub_group_addr_comp; /*!< Event parameters of ESP_BLE_MESH_MODEL_UNSUBSCRIBE_GROUP_ADDR_COMP_EVT */ 1497 /** 1498 * @brief ESP_BLE_MESH_DEINIT_MESH_COMP_EVT 1499 */ 1500 struct ble_mesh_deinit_mesh_comp_param { 1501 int err_code; /*!< Indicate the result of BLE Mesh deinitialization */ 1502 } deinit_mesh_comp; /*!< Event parameter of ESP_BLE_MESH_DEINIT_MESH_COMP_EVT */ 1503 } esp_ble_mesh_prov_cb_param_t; 1504 1505 /** 1506 * @brief BLE Mesh models related Model ID and Opcode definitions 1507 */ 1508 1509 /*!< Foundation Models */ 1510 #define ESP_BLE_MESH_MODEL_ID_CONFIG_SRV 0x0000 1511 #define ESP_BLE_MESH_MODEL_ID_CONFIG_CLI 0x0001 1512 #define ESP_BLE_MESH_MODEL_ID_HEALTH_SRV 0x0002 1513 #define ESP_BLE_MESH_MODEL_ID_HEALTH_CLI 0x0003 1514 1515 /*!< Models from the Mesh Model Specification */ 1516 #define ESP_BLE_MESH_MODEL_ID_GEN_ONOFF_SRV 0x1000 1517 #define ESP_BLE_MESH_MODEL_ID_GEN_ONOFF_CLI 0x1001 1518 #define ESP_BLE_MESH_MODEL_ID_GEN_LEVEL_SRV 0x1002 1519 #define ESP_BLE_MESH_MODEL_ID_GEN_LEVEL_CLI 0x1003 1520 #define ESP_BLE_MESH_MODEL_ID_GEN_DEF_TRANS_TIME_SRV 0x1004 1521 #define ESP_BLE_MESH_MODEL_ID_GEN_DEF_TRANS_TIME_CLI 0x1005 1522 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_ONOFF_SRV 0x1006 1523 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_ONOFF_SETUP_SRV 0x1007 1524 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_ONOFF_CLI 0x1008 1525 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_LEVEL_SRV 0x1009 1526 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_LEVEL_SETUP_SRV 0x100a 1527 #define ESP_BLE_MESH_MODEL_ID_GEN_POWER_LEVEL_CLI 0x100b 1528 #define ESP_BLE_MESH_MODEL_ID_GEN_BATTERY_SRV 0x100c 1529 #define ESP_BLE_MESH_MODEL_ID_GEN_BATTERY_CLI 0x100d 1530 #define ESP_BLE_MESH_MODEL_ID_GEN_LOCATION_SRV 0x100e 1531 #define ESP_BLE_MESH_MODEL_ID_GEN_LOCATION_SETUP_SRV 0x100f 1532 #define ESP_BLE_MESH_MODEL_ID_GEN_LOCATION_CLI 0x1010 1533 #define ESP_BLE_MESH_MODEL_ID_GEN_ADMIN_PROP_SRV 0x1011 1534 #define ESP_BLE_MESH_MODEL_ID_GEN_MANUFACTURER_PROP_SRV 0x1012 1535 #define ESP_BLE_MESH_MODEL_ID_GEN_USER_PROP_SRV 0x1013 1536 #define ESP_BLE_MESH_MODEL_ID_GEN_CLIENT_PROP_SRV 0x1014 1537 #define ESP_BLE_MESH_MODEL_ID_GEN_PROP_CLI 0x1015 1538 #define ESP_BLE_MESH_MODEL_ID_SENSOR_SRV 0x1100 1539 #define ESP_BLE_MESH_MODEL_ID_SENSOR_SETUP_SRV 0x1101 1540 #define ESP_BLE_MESH_MODEL_ID_SENSOR_CLI 0x1102 1541 #define ESP_BLE_MESH_MODEL_ID_TIME_SRV 0x1200 1542 #define ESP_BLE_MESH_MODEL_ID_TIME_SETUP_SRV 0x1201 1543 #define ESP_BLE_MESH_MODEL_ID_TIME_CLI 0x1202 1544 #define ESP_BLE_MESH_MODEL_ID_SCENE_SRV 0x1203 1545 #define ESP_BLE_MESH_MODEL_ID_SCENE_SETUP_SRV 0x1204 1546 #define ESP_BLE_MESH_MODEL_ID_SCENE_CLI 0x1205 1547 #define ESP_BLE_MESH_MODEL_ID_SCHEDULER_SRV 0x1206 1548 #define ESP_BLE_MESH_MODEL_ID_SCHEDULER_SETUP_SRV 0x1207 1549 #define ESP_BLE_MESH_MODEL_ID_SCHEDULER_CLI 0x1208 1550 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LIGHTNESS_SRV 0x1300 1551 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LIGHTNESS_SETUP_SRV 0x1301 1552 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LIGHTNESS_CLI 0x1302 1553 #define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_SRV 0x1303 1554 #define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_SETUP_SRV 0x1304 1555 #define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_CLI 0x1305 1556 #define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_TEMP_SRV 0x1306 1557 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_SRV 0x1307 1558 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_SETUP_SRV 0x1308 1559 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_CLI 0x1309 1560 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_HUE_SRV 0x130a 1561 #define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_SAT_SRV 0x130b 1562 #define ESP_BLE_MESH_MODEL_ID_LIGHT_XYL_SRV 0x130c 1563 #define ESP_BLE_MESH_MODEL_ID_LIGHT_XYL_SETUP_SRV 0x130d 1564 #define ESP_BLE_MESH_MODEL_ID_LIGHT_XYL_CLI 0x130e 1565 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LC_SRV 0x130f 1566 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LC_SETUP_SRV 0x1310 1567 #define ESP_BLE_MESH_MODEL_ID_LIGHT_LC_CLI 0x1311 1568 1569 /** 1570 * esp_ble_mesh_opcode_config_client_get_t belongs to esp_ble_mesh_opcode_t, this typedef is only 1571 * used to locate the opcodes used by esp_ble_mesh_config_client_get_state. 1572 * The following opcodes will only be used in the esp_ble_mesh_config_client_get_state function. 1573 */ 1574 typedef uint32_t esp_ble_mesh_opcode_config_client_get_t; 1575 1576 #define ESP_BLE_MESH_MODEL_OP_BEACON_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x09) /*!< Config Beacon Get */ 1577 #define ESP_BLE_MESH_MODEL_OP_COMPOSITION_DATA_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x08) /*!< Config Composition Data Get */ 1578 #define ESP_BLE_MESH_MODEL_OP_DEFAULT_TTL_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0C) /*!< Config Default TTL Get */ 1579 #define ESP_BLE_MESH_MODEL_OP_GATT_PROXY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x12) /*!< Config GATT Proxy Get */ 1580 #define ESP_BLE_MESH_MODEL_OP_RELAY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x26) /*!< Config Relay Get */ 1581 #define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x18) /*!< Config Model Publication Get */ 1582 #define ESP_BLE_MESH_MODEL_OP_FRIEND_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0F) /*!< Config Friend Get */ 1583 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_PUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x38) /*!< Config Heartbeat Publication Get */ 1584 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_SUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3a) /*!< Config Heartbeat Subscription Get */ 1585 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x42) /*!< Config NetKey Get */ 1586 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x01) /*!< Config AppKey Get */ 1587 #define ESP_BLE_MESH_MODEL_OP_NODE_IDENTITY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x46) /*!< Config Node Identity Get */ 1588 #define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_SUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x29) /*!< Config SIG Model Subscription Get */ 1589 #define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_SUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2B) /*!< Config Vendor Model Subscription Get */ 1590 #define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_APP_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4B) /*!< Config SIG Model App Get */ 1591 #define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_APP_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4D) /*!< Config Vendor Model App Get */ 1592 #define ESP_BLE_MESH_MODEL_OP_KEY_REFRESH_PHASE_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x15) /*!< Config Key Refresh Phase Get */ 1593 #define ESP_BLE_MESH_MODEL_OP_LPN_POLLTIMEOUT_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2D) /*!< Config Low Power Node PollTimeout Get */ 1594 #define ESP_BLE_MESH_MODEL_OP_NETWORK_TRANSMIT_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x23) /*!< Config Network Transmit Get */ 1595 1596 /** 1597 * esp_ble_mesh_opcode_config_client_set_t belongs to esp_ble_mesh_opcode_t, this typedef is 1598 * only used to locate the opcodes used by esp_ble_mesh_config_client_set_state. 1599 * The following opcodes will only be used in the esp_ble_mesh_config_client_set_state function. 1600 */ 1601 typedef uint32_t esp_ble_mesh_opcode_config_client_set_t; 1602 1603 #define ESP_BLE_MESH_MODEL_OP_BEACON_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0A) /*!< Config Beacon Set */ 1604 #define ESP_BLE_MESH_MODEL_OP_DEFAULT_TTL_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0D) /*!< Config Default TTL Set */ 1605 #define ESP_BLE_MESH_MODEL_OP_GATT_PROXY_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x13) /*!< Config GATT Proxy Set */ 1606 #define ESP_BLE_MESH_MODEL_OP_RELAY_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x27) /*!< Config Relay Set */ 1607 #define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_SET ESP_BLE_MESH_MODEL_OP_1(0x03) /*!< Config Model Publication Set */ 1608 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_ADD ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1B) /*!< Config Model Subscription Add */ 1609 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_VIRTUAL_ADDR_ADD ESP_BLE_MESH_MODEL_OP_2(0x80, 0x20) /*!< Config Model Subscription Virtual Address Add */ 1610 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1C) /*!< Config Model Subscription Delete */ 1611 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_VIRTUAL_ADDR_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x21) /*!< Config Model Subscription Virtual Address Delete */ 1612 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_OVERWRITE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1E) /*!< Config Model Subscription Overwrite */ 1613 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_VIRTUAL_ADDR_OVERWRITE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x22) /*!< Config Model Subscription Virtual Address Overwrite */ 1614 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_ADD ESP_BLE_MESH_MODEL_OP_2(0x80, 0x40) /*!< Config NetKey Add */ 1615 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_ADD ESP_BLE_MESH_MODEL_OP_1(0x00) /*!< Config AppKey Add */ 1616 #define ESP_BLE_MESH_MODEL_OP_MODEL_APP_BIND ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3D) /*!< Config Model App Bind */ 1617 #define ESP_BLE_MESH_MODEL_OP_NODE_RESET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x49) /*!< Config Node Reset */ 1618 #define ESP_BLE_MESH_MODEL_OP_FRIEND_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x10) /*!< Config Friend Set */ 1619 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_PUB_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x39) /*!< Config Heartbeat Publication Set */ 1620 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_SUB_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3B) /*!< Config Heartbeat Subscription Set */ 1621 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_UPDATE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x45) /*!< Config NetKey Update */ 1622 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x41) /*!< Config NetKey Delete */ 1623 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_UPDATE ESP_BLE_MESH_MODEL_OP_1(0x01) /*!< Config AppKey Update */ 1624 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x00) /*!< Config AppKey Delete */ 1625 #define ESP_BLE_MESH_MODEL_OP_NODE_IDENTITY_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x47) /*!< Config Node Identity Set */ 1626 #define ESP_BLE_MESH_MODEL_OP_KEY_REFRESH_PHASE_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x16) /*!< Config Key Refresh Phase Set */ 1627 #define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_VIRTUAL_ADDR_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1A) /*!< Config Model Publication Virtual Address Set */ 1628 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_DELETE_ALL ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1D) /*!< Config Model Subscription Delete All */ 1629 #define ESP_BLE_MESH_MODEL_OP_MODEL_APP_UNBIND ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3F) /*!< Config Model App Unbind */ 1630 #define ESP_BLE_MESH_MODEL_OP_NETWORK_TRANSMIT_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x24) /*!< Config Network Transmit Set */ 1631 1632 /** 1633 * esp_ble_mesh_opcode_config_status_t belongs to esp_ble_mesh_opcode_t, this typedef is only 1634 * used to locate the opcodes used by the Config Model messages 1635 * The following opcodes are used by the BLE Mesh Config Server Model internally to respond 1636 * to the Config Client Model's request messages. 1637 */ 1638 typedef uint32_t esp_ble_mesh_opcode_config_status_t; 1639 1640 #define ESP_BLE_MESH_MODEL_OP_BEACON_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0B) 1641 #define ESP_BLE_MESH_MODEL_OP_COMPOSITION_DATA_STATUS ESP_BLE_MESH_MODEL_OP_1(0x02) 1642 #define ESP_BLE_MESH_MODEL_OP_DEFAULT_TTL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0E) 1643 #define ESP_BLE_MESH_MODEL_OP_GATT_PROXY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x14) 1644 #define ESP_BLE_MESH_MODEL_OP_RELAY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x28) 1645 #define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x19) 1646 #define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1F) 1647 #define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_SUB_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2A) 1648 #define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_SUB_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2C) 1649 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x44) 1650 #define ESP_BLE_MESH_MODEL_OP_NET_KEY_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x43) 1651 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x03) 1652 #define ESP_BLE_MESH_MODEL_OP_APP_KEY_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x02) 1653 #define ESP_BLE_MESH_MODEL_OP_NODE_IDENTITY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x48) 1654 #define ESP_BLE_MESH_MODEL_OP_MODEL_APP_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3E) 1655 #define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_APP_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4C) 1656 #define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_APP_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4E) 1657 #define ESP_BLE_MESH_MODEL_OP_NODE_RESET_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4A) 1658 #define ESP_BLE_MESH_MODEL_OP_FRIEND_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x11) 1659 #define ESP_BLE_MESH_MODEL_OP_KEY_REFRESH_PHASE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x17) 1660 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_PUB_STATUS ESP_BLE_MESH_MODEL_OP_1(0x06) 1661 #define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_SUB_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3C) 1662 #define ESP_BLE_MESH_MODEL_OP_LPN_POLLTIMEOUT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2E) 1663 #define ESP_BLE_MESH_MODEL_OP_NETWORK_TRANSMIT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x25) 1664 1665 /** 1666 * This typedef is only used to indicate the status code contained in some of 1667 * the Configuration Server Model status message. 1668 */ 1669 typedef uint8_t esp_ble_mesh_cfg_status_t; 1670 1671 #define ESP_BLE_MESH_CFG_STATUS_SUCCESS 0x00 1672 #define ESP_BLE_MESH_CFG_STATUS_INVALID_ADDRESS 0x01 1673 #define ESP_BLE_MESH_CFG_STATUS_INVALID_MODEL 0x02 1674 #define ESP_BLE_MESH_CFG_STATUS_INVALID_APPKEY 0x03 1675 #define ESP_BLE_MESH_CFG_STATUS_INVALID_NETKEY 0x04 1676 #define ESP_BLE_MESH_CFG_STATUS_INSUFFICIENT_RESOURCES 0x05 1677 #define ESP_BLE_MESH_CFG_STATUS_KEY_INDEX_ALREADY_STORED 0x06 1678 #define ESP_BLE_MESH_CFG_STATUS_INVALID_PUBLISH_PARAMETERS 0x07 1679 #define ESP_BLE_MESH_CFG_STATUS_NOT_A_SUBSCRIBE_MODEL 0x08 1680 #define ESP_BLE_MESH_CFG_STATUS_STORAGE_FAILURE 0x09 1681 #define ESP_BLE_MESH_CFG_STATUS_FEATURE_NOT_SUPPORTED 0x0A 1682 #define ESP_BLE_MESH_CFG_STATUS_CANNOT_UPDATE 0x0B 1683 #define ESP_BLE_MESH_CFG_STATUS_CANNOT_REMOVE 0x0C 1684 #define ESP_BLE_MESH_CFG_STATUS_CANNOT_BIND 0x0D 1685 #define ESP_BLE_MESH_CFG_STATUS_TEMP_UNABLE_TO_CHANGE_STATE 0x0E 1686 #define ESP_BLE_MESH_CFG_STATUS_CANNOT_SET 0x0F 1687 #define ESP_BLE_MESH_CFG_STATUS_UNSPECIFIED_ERROR 0x10 1688 #define ESP_BLE_MESH_CFG_STATUS_INVALID_BINDING 0x11 1689 1690 /** 1691 * esp_ble_mesh_opcode_health_client_get_t belongs to esp_ble_mesh_opcode_t, this typedef is 1692 * only used to locate the opcodes used by esp_ble_mesh_health_client_get_state. 1693 * The following opcodes will only be used in the esp_ble_mesh_health_client_get_state function. 1694 */ 1695 typedef uint32_t esp_ble_mesh_opcode_health_client_get_t; 1696 1697 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x31) /*!< Health Fault Get */ 1698 #define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x34) /*!< Health Period Get */ 1699 #define ESP_BLE_MESH_MODEL_OP_ATTENTION_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x04) /*!< Health Attention Get */ 1700 1701 /** 1702 * esp_ble_mesh_opcode_health_client_set_t belongs to esp_ble_mesh_opcode_t, this typedef is 1703 * only used to locate the opcodes used by esp_ble_mesh_health_client_set_state. 1704 * The following opcodes will only be used in the esp_ble_mesh_health_client_set_state function. 1705 */ 1706 typedef uint32_t esp_ble_mesh_opcode_health_client_set_t; 1707 1708 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_CLEAR ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2F) /*!< Health Fault Clear */ 1709 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_CLEAR_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x30) /*!< Health Fault Clear Unacknowledged */ 1710 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_TEST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x32) /*!< Health Fault Test */ 1711 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_TEST_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x33) /*!< Health Fault Test Unacknowledged */ 1712 #define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x35) /*!< Health Period Set */ 1713 #define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x36) /*!< Health Period Set Unacknowledged */ 1714 #define ESP_BLE_MESH_MODEL_OP_ATTENTION_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x05) /*!< Health Attention Set */ 1715 #define ESP_BLE_MESH_MODEL_OP_ATTENTION_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x06) /*!< Health Attention Set Unacknowledged */ 1716 1717 /** 1718 * esp_ble_mesh_health_model_status_t belongs to esp_ble_mesh_opcode_t, this typedef is 1719 * only used to locate the opcodes used by the Health Model messages. 1720 * The following opcodes are used by the BLE Mesh Health Server Model internally to 1721 * respond to the Health Client Model's request messages. 1722 */ 1723 typedef uint32_t esp_ble_mesh_health_model_status_t; 1724 1725 #define ESP_BLE_MESH_MODEL_OP_HEALTH_CURRENT_STATUS ESP_BLE_MESH_MODEL_OP_1(0x04) 1726 #define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_STATUS ESP_BLE_MESH_MODEL_OP_1(0x05) 1727 #define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x37) 1728 #define ESP_BLE_MESH_MODEL_OP_ATTENTION_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x07) 1729 1730 /** 1731 * esp_ble_mesh_generic_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is 1732 * only used to locate the opcodes used by functions esp_ble_mesh_generic_client_get_state 1733 * & esp_ble_mesh_generic_client_set_state. 1734 */ 1735 typedef uint32_t esp_ble_mesh_generic_message_opcode_t; 1736 1737 /*!< Generic OnOff Message Opcode */ 1738 #define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x01) 1739 #define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x02) 1740 #define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x03) 1741 #define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x04) 1742 1743 /*!< Generic Level Message Opcode */ 1744 #define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x05) 1745 #define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x06) 1746 #define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x07) 1747 #define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x08) 1748 #define ESP_BLE_MESH_MODEL_OP_GEN_DELTA_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x09) 1749 #define ESP_BLE_MESH_MODEL_OP_GEN_DELTA_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0A) 1750 #define ESP_BLE_MESH_MODEL_OP_GEN_MOVE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0B) 1751 #define ESP_BLE_MESH_MODEL_OP_GEN_MOVE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0C) 1752 1753 /*!< Generic Default Transition Time Message Opcode */ 1754 #define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0D) 1755 #define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0E) 1756 #define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0F) 1757 #define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x10) 1758 1759 /*!< Generic Power OnOff Message Opcode */ 1760 #define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x11) 1761 #define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x12) 1762 1763 /*!< Generic Power OnOff Setup Message Opcode */ 1764 #define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x13) 1765 #define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x14) 1766 1767 /*!< Generic Power Level Message Opcode */ 1768 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x15) 1769 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x16) 1770 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x17) 1771 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x18) 1772 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LAST_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x19) 1773 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LAST_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1A) 1774 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1B) 1775 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1C) 1776 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1D) 1777 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1E) 1778 1779 /*!< Generic Power Level Setup Message Opcode */ 1780 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1F) 1781 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x20) 1782 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x21) 1783 #define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x22) 1784 1785 /*!< Generic Battery Message Opcode */ 1786 #define ESP_BLE_MESH_MODEL_OP_GEN_BATTERY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x23) 1787 #define ESP_BLE_MESH_MODEL_OP_GEN_BATTERY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x24) 1788 1789 /*!< Generic Location Message Opcode */ 1790 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x25) 1791 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_STATUS ESP_BLE_MESH_MODEL_OP_1(0x40) 1792 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x26) 1793 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x27) 1794 1795 /*!< Generic Location Setup Message Opcode */ 1796 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_SET ESP_BLE_MESH_MODEL_OP_1(0x41) 1797 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x42) 1798 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x28) 1799 #define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x29) 1800 1801 /*!< Generic Manufacturer Property Message Opcode */ 1802 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2A) 1803 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x43) 1804 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2B) 1805 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x44) 1806 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x45) 1807 #define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x46) 1808 1809 /*!< Generic Admin Property Message Opcode */ 1810 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2C) 1811 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x47) 1812 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2D) 1813 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x48) 1814 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x49) 1815 #define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x4A) 1816 1817 /*!< Generic User Property Message Opcode */ 1818 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2E) 1819 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x4B) 1820 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2F) 1821 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x4C) 1822 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x4D) 1823 #define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x4E) 1824 1825 /*!< Generic Client Property Message Opcode */ 1826 #define ESP_BLE_MESH_MODEL_OP_GEN_CLIENT_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_1(0x4F) 1827 #define ESP_BLE_MESH_MODEL_OP_GEN_CLIENT_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x50) 1828 1829 /** 1830 * esp_ble_mesh_sensor_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is 1831 * only used to locate the opcodes used by functions esp_ble_mesh_sensor_client_get_state 1832 * & esp_ble_mesh_sensor_client_set_state. 1833 */ 1834 typedef uint32_t esp_ble_mesh_sensor_message_opcode_t; 1835 1836 /*!< Sensor Message Opcode */ 1837 #define ESP_BLE_MESH_MODEL_OP_SENSOR_DESCRIPTOR_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x30) 1838 #define ESP_BLE_MESH_MODEL_OP_SENSOR_DESCRIPTOR_STATUS ESP_BLE_MESH_MODEL_OP_1(0x51) 1839 #define ESP_BLE_MESH_MODEL_OP_SENSOR_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x31) 1840 #define ESP_BLE_MESH_MODEL_OP_SENSOR_STATUS ESP_BLE_MESH_MODEL_OP_1(0x52) 1841 #define ESP_BLE_MESH_MODEL_OP_SENSOR_COLUMN_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x32) 1842 #define ESP_BLE_MESH_MODEL_OP_SENSOR_COLUMN_STATUS ESP_BLE_MESH_MODEL_OP_1(0x53) 1843 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SERIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x33) 1844 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SERIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x54) 1845 1846 /*!< Sensor Setup Message Opcode */ 1847 #define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x34) 1848 #define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_SET ESP_BLE_MESH_MODEL_OP_1(0x55) 1849 #define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x56) 1850 #define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_STATUS ESP_BLE_MESH_MODEL_OP_1(0x57) 1851 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTINGS_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x35) 1852 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTINGS_STATUS ESP_BLE_MESH_MODEL_OP_1(0x58) 1853 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x36) 1854 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_SET ESP_BLE_MESH_MODEL_OP_1(0x59) 1855 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x5A) 1856 #define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5B) 1857 1858 /** 1859 * esp_ble_mesh_time_scene_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is 1860 * only used to locate the opcodes used by functions esp_ble_mesh_time_scene_client_get_state 1861 * & esp_ble_mesh_time_scene_client_set_state. 1862 */ 1863 typedef uint32_t esp_ble_mesh_time_scene_message_opcode_t; 1864 1865 /*!< Time Message Opcode */ 1866 #define ESP_BLE_MESH_MODEL_OP_TIME_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x37) 1867 #define ESP_BLE_MESH_MODEL_OP_TIME_SET ESP_BLE_MESH_MODEL_OP_1(0x5C) 1868 #define ESP_BLE_MESH_MODEL_OP_TIME_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5D) 1869 #define ESP_BLE_MESH_MODEL_OP_TIME_ROLE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x38) 1870 #define ESP_BLE_MESH_MODEL_OP_TIME_ROLE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x39) 1871 #define ESP_BLE_MESH_MODEL_OP_TIME_ROLE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3A) 1872 #define ESP_BLE_MESH_MODEL_OP_TIME_ZONE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3B) 1873 #define ESP_BLE_MESH_MODEL_OP_TIME_ZONE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3C) 1874 #define ESP_BLE_MESH_MODEL_OP_TIME_ZONE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3D) 1875 #define ESP_BLE_MESH_MODEL_OP_TAI_UTC_DELTA_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3E) 1876 #define ESP_BLE_MESH_MODEL_OP_TAI_UTC_DELTA_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3F) 1877 #define ESP_BLE_MESH_MODEL_OP_TAI_UTC_DELTA_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x40) 1878 1879 /*!< Scene Message Opcode */ 1880 #define ESP_BLE_MESH_MODEL_OP_SCENE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x41) 1881 #define ESP_BLE_MESH_MODEL_OP_SCENE_RECALL ESP_BLE_MESH_MODEL_OP_2(0x82, 0x42) 1882 #define ESP_BLE_MESH_MODEL_OP_SCENE_RECALL_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x43) 1883 #define ESP_BLE_MESH_MODEL_OP_SCENE_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5E) 1884 #define ESP_BLE_MESH_MODEL_OP_SCENE_REGISTER_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x44) 1885 #define ESP_BLE_MESH_MODEL_OP_SCENE_REGISTER_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x45) 1886 1887 /*!< Scene Setup Message Opcode */ 1888 #define ESP_BLE_MESH_MODEL_OP_SCENE_STORE ESP_BLE_MESH_MODEL_OP_2(0x82, 0x46) 1889 #define ESP_BLE_MESH_MODEL_OP_SCENE_STORE_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x47) 1890 #define ESP_BLE_MESH_MODEL_OP_SCENE_DELETE ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9E) 1891 #define ESP_BLE_MESH_MODEL_OP_SCENE_DELETE_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9F) 1892 1893 /*!< Scheduler Message Opcode */ 1894 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x48) 1895 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5F) 1896 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x49) 1897 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4A) 1898 1899 /*!< Scheduler Setup Message Opcode */ 1900 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_SET ESP_BLE_MESH_MODEL_OP_1(0x60) 1901 #define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x61) 1902 1903 /** 1904 * esp_ble_mesh_light_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is 1905 * only used to locate the opcodes used by functions esp_ble_mesh_light_client_get_state 1906 * & esp_ble_mesh_light_client_set_state. 1907 */ 1908 typedef uint32_t esp_ble_mesh_light_message_opcode_t; 1909 1910 /*!< Light Lightness Message Opcode */ 1911 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4B) 1912 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4C) 1913 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4D) 1914 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4E) 1915 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4F) 1916 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x50) 1917 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x51) 1918 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x52) 1919 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LAST_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x53) 1920 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LAST_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x54) 1921 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x55) 1922 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x56) 1923 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x57) 1924 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x58) 1925 1926 /*!< Light Lightness Setup Message Opcode */ 1927 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x59) 1928 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5A) 1929 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5B) 1930 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5C) 1931 1932 /*!< Light CTL Message Opcode */ 1933 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5D) 1934 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5E) 1935 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5F) 1936 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x60) 1937 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x61) 1938 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x62) 1939 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x63) 1940 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x64) 1941 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x65) 1942 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x66) 1943 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x67) 1944 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x68) 1945 1946 /*!< Light CTL Setup Message Opcode */ 1947 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x69) 1948 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6A) 1949 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6B) 1950 #define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6C) 1951 1952 /*!< Light HSL Message Opcode */ 1953 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6D) 1954 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6E) 1955 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6F) 1956 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x70) 1957 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x71) 1958 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x72) 1959 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x73) 1960 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x74) 1961 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x75) 1962 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x76) 1963 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x77) 1964 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x78) 1965 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_TARGET_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x79) 1966 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_TARGET_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7A) 1967 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7B) 1968 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7C) 1969 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7D) 1970 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7E) 1971 1972 /*!< Light HSL Setup Message Opcode */ 1973 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7F) 1974 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x80) 1975 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x81) 1976 #define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x82) 1977 1978 /*!< Light xyL Message Opcode */ 1979 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x83) 1980 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x84) 1981 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x85) 1982 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x86) 1983 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_TARGET_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x87) 1984 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_TARGET_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x88) 1985 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x89) 1986 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8A) 1987 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8B) 1988 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8C) 1989 1990 /*!< Light xyL Setup Message Opcode */ 1991 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8D) 1992 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8E) 1993 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8F) 1994 #define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x90) 1995 1996 /*!< Light Control Message Opcode */ 1997 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x91) 1998 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x92) 1999 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x93) 2000 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x94) 2001 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x95) 2002 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x96) 2003 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x97) 2004 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x98) 2005 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x99) 2006 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9A) 2007 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9B) 2008 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9C) 2009 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9D) 2010 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x62) 2011 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x63) 2012 #define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x64) 2013 2014 typedef uint32_t esp_ble_mesh_opcode_t; 2015 /*!< End of defines of esp_ble_mesh_opcode_t */ 2016 2017 /** 2018 * This typedef is only used to indicate the status code contained in some of the 2019 * server models (e.g. Generic Server Model) status message. 2020 */ 2021 typedef uint8_t esp_ble_mesh_model_status_t; 2022 2023 #define ESP_BLE_MESH_MODEL_STATUS_SUCCESS 0x00 2024 #define ESP_BLE_MESH_MODEL_STATUS_CANNOT_SET_RANGE_MIN 0x01 2025 #define ESP_BLE_MESH_MODEL_STATUS_CANNOT_SET_RANGE_MAX 0x02 2026 2027 /** 2028 * @brief BLE Mesh client models related definitions 2029 */ 2030 2031 /** Client model Get/Set message opcode and corresponding Status message opcode */ 2032 typedef struct { 2033 uint32_t cli_op; /*!< The client message opcode */ 2034 uint32_t status_op; /*!< The server status opcode corresponding to the client message opcode */ 2035 } esp_ble_mesh_client_op_pair_t; 2036 2037 /** Client Model user data context. */ 2038 typedef struct { 2039 esp_ble_mesh_model_t *model; /*!< Pointer to the client model. Initialized by the stack. */ 2040 int op_pair_size; /*!< Size of the op_pair */ 2041 const esp_ble_mesh_client_op_pair_t *op_pair; /*!< Table containing get/set message opcode and corresponding status message opcode */ 2042 uint32_t publish_status; /*!< Callback used to handle the received unsolicited message. Initialized by the stack. */ 2043 void *internal_data; /*!< Pointer to the internal data of client model */ 2044 uint8_t msg_role; /*!< Role of the device (Node/Provisioner) that is going to send messages */ 2045 } esp_ble_mesh_client_t; 2046 2047 /** Common parameters of the messages sent by Client Model. */ 2048 typedef struct { 2049 esp_ble_mesh_opcode_t opcode; /*!< Message opcode */ 2050 esp_ble_mesh_model_t *model; /*!< Pointer to the client model structure */ 2051 esp_ble_mesh_msg_ctx_t ctx; /*!< The context used to send message */ 2052 int32_t msg_timeout; /*!< Timeout value (ms) to get response to the sent message */ 2053 /*!< Note: if using default timeout value in menuconfig, make sure to set this value to 0 */ 2054 uint8_t msg_role; /*!< Role of the device - Node/Provisioner */ 2055 } esp_ble_mesh_client_common_param_t; 2056 2057 /** 2058 * @brief BLE Mesh server models related definitions 2059 */ 2060 2061 /** This enum value is the flag of transition timer operation */ 2062 enum { 2063 ESP_BLE_MESH_SERVER_TRANS_TIMER_START, /* Proper transition timer has been started */ 2064 ESP_BLE_MESH_SERVER_FLAG_MAX, 2065 }; 2066 2067 /** Parameters of the server model state transition */ 2068 typedef struct { 2069 bool just_started; /*!< Indicate if the state transition has just started */ 2070 2071 uint8_t trans_time; /*!< State transition time */ 2072 uint8_t remain_time; /*!< Remaining time of state transition */ 2073 uint8_t delay; /*!< Delay before starting state transition */ 2074 uint32_t quo_tt; /*!< Duration of each divided transition step */ 2075 uint32_t counter; /*!< Number of steps which the transition duration is divided */ 2076 uint32_t total_duration; /*!< State transition total duration */ 2077 int64_t start_timestamp; /*!< Time when the state transition is started */ 2078 2079 /** 2080 * Flag used to indicate if the transition timer has been started internally. 2081 * 2082 * If the model which contains esp_ble_mesh_state_transition_t sets "set_auto_rsp" 2083 * to ESP_BLE_MESH_SERVER_RSP_BY_APP, the handler of the timer shall be initialized 2084 * by the users. 2085 * 2086 * And users can use this flag to indicate whether the timer is started or not. 2087 */ 2088 BLE_MESH_ATOMIC_DEFINE(flag, ESP_BLE_MESH_SERVER_FLAG_MAX); 2089 struct k_delayed_work timer; /*!< Timer used for state transition */ 2090 } esp_ble_mesh_state_transition_t; 2091 2092 /** Parameters of the server model received last same set message. */ 2093 typedef struct { 2094 uint8_t tid; /*!< Transaction number of the last message */ 2095 uint16_t src; /*!< Source address of the last message */ 2096 uint16_t dst; /*!< Destination address of the last message */ 2097 int64_t timestamp; /*!< Time when the last message is received */ 2098 } esp_ble_mesh_last_msg_info_t; 2099 2100 #define ESP_BLE_MESH_SERVER_RSP_BY_APP 0 /*!< Response need to be sent in the application */ 2101 #define ESP_BLE_MESH_SERVER_AUTO_RSP 1 /*!< Response will be sent internally */ 2102 2103 /** Parameters of the Server Model response control */ 2104 typedef struct { 2105 /** 2106 * @brief BLE Mesh Server Response Option 2107 * 1. If get_auto_rsp is set to ESP_BLE_MESH_SERVER_RSP_BY_APP, then the 2108 * response of Client Get messages need to be replied by the application; 2109 * 2. If get_auto_rsp is set to ESP_BLE_MESH_SERVER_AUTO_RSP, then the 2110 * response of Client Get messages will be replied by the server models; 2111 * 3. If set_auto_rsp is set to ESP_BLE_MESH_SERVER_RSP_BY_APP, then the 2112 * response of Client Set messages need to be replied by the application; 2113 * 4. If set_auto_rsp is set to ESP_BLE_MESH_SERVER_AUTO_RSP, then the 2114 * response of Client Set messages will be replied by the server models; 2115 * 5. If status_auto_rsp is set to ESP_BLE_MESH_SERVER_RSP_BY_APP, then the 2116 * response of Server Status messages need to be replied by the application; 2117 * 6. If status_auto_rsp is set to ESP_BLE_MESH_SERVER_AUTO_RSP, then the 2118 * response of Server Status messages will be replied by the server models; 2119 */ 2120 uint8_t get_auto_rsp : 1, /*!< Response control for Client Get messages */ 2121 set_auto_rsp : 1, /*!< Response control for Client Set messages */ 2122 status_auto_rsp : 1; /*!< Response control for Server Status messages */ 2123 } esp_ble_mesh_server_rsp_ctrl_t; 2124 2125 /** 2126 * @brief Server model state value union 2127 */ 2128 typedef union { 2129 struct { 2130 uint8_t onoff; /*!< The value of the Generic OnOff state */ 2131 } gen_onoff; /*!< The Generic OnOff state */ 2132 struct { 2133 int16_t level; /*!< The value of the Generic Level state */ 2134 } gen_level; /*!< The Generic Level state */ 2135 struct { 2136 uint8_t onpowerup; /*!< The value of the Generic OnPowerUp state */ 2137 } gen_onpowerup; /*!< The Generic OnPowerUp state */ 2138 struct { 2139 uint16_t power; /*!< The value of the Generic Power Actual state */ 2140 } gen_power_actual; /*!< The Generic Power Actual state */ 2141 struct { 2142 uint16_t lightness; /*!< The value of the Light Lightness Actual state */ 2143 } light_lightness_actual; /*!< The Light Lightness Actual state */ 2144 struct { 2145 uint16_t lightness; /*!< The value of the Light Lightness Linear state */ 2146 } light_lightness_linear; /*!< The Light Lightness Linear state */ 2147 struct { 2148 uint16_t lightness; /*!< The value of the Light CTL Lightness state */ 2149 } light_ctl_lightness; /*!< The Light CTL Lightness state */ 2150 struct { 2151 uint16_t temperature; /*!< The value of the Light CTL Temperature state */ 2152 int16_t delta_uv; /*!< The value of the Light CTL Delta UV state */ 2153 } light_ctl_temp_delta_uv; /*!< The Light CTL Temperature & Delta UV states */ 2154 struct { 2155 uint16_t lightness; /*!< The value of the Light HSL Lightness state */ 2156 uint16_t hue; /*!< The value of the Light HSL Hue state */ 2157 uint16_t saturation; /*!< The value of the Light HSL Saturation state */ 2158 } light_hsl; /*!< The Light HSL composite state */ 2159 struct { 2160 uint16_t lightness; /*!< The value of the Light HSL Lightness state */ 2161 } light_hsl_lightness; /*!< The Light HSL Lightness state */ 2162 struct { 2163 uint16_t hue; /*!< The value of the Light HSL Hue state */ 2164 } light_hsl_hue; /*!< The Light HSL Hue state */ 2165 struct { 2166 uint16_t saturation; /*!< The value of the Light HSL Saturation state */ 2167 } light_hsl_saturation; /*!< The Light HSL Saturation state */ 2168 struct { 2169 uint16_t lightness; /*!< The value of the Light xyL Lightness state */ 2170 } light_xyl_lightness; /*!< The Light xyL Lightness state */ 2171 struct { 2172 uint8_t onoff; /*!< The value of the Light LC Light OnOff state */ 2173 } light_lc_light_onoff; /*!< The Light LC Light OnOff state */ 2174 } esp_ble_mesh_server_state_value_t; 2175 2176 /** This enum value is the type of server model states */ 2177 typedef enum { 2178 ESP_BLE_MESH_GENERIC_ONOFF_STATE, 2179 ESP_BLE_MESH_GENERIC_LEVEL_STATE, 2180 ESP_BLE_MESH_GENERIC_ONPOWERUP_STATE, 2181 ESP_BLE_MESH_GENERIC_POWER_ACTUAL_STATE, 2182 ESP_BLE_MESH_LIGHT_LIGHTNESS_ACTUAL_STATE, 2183 ESP_BLE_MESH_LIGHT_LIGHTNESS_LINEAR_STATE, 2184 ESP_BLE_MESH_LIGHT_CTL_LIGHTNESS_STATE, 2185 ESP_BLE_MESH_LIGHT_CTL_TEMP_DELTA_UV_STATE, 2186 ESP_BLE_MESH_LIGHT_HSL_STATE, 2187 ESP_BLE_MESH_LIGHT_HSL_LIGHTNESS_STATE, 2188 ESP_BLE_MESH_LIGHT_HSL_HUE_STATE, 2189 ESP_BLE_MESH_LIGHT_HSL_SATURATION_STATE, 2190 ESP_BLE_MESH_LIGHT_XYL_LIGHTNESS_STATE, 2191 ESP_BLE_MESH_LIGHT_LC_LIGHT_ONOFF_STATE, 2192 ESP_BLE_MESH_SERVER_MODEL_STATE_MAX, 2193 } esp_ble_mesh_server_state_type_t; 2194 2195 /*!< This enum value is the event of undefined SIG models and vendor models */ 2196 typedef enum { 2197 ESP_BLE_MESH_MODEL_OPERATION_EVT, /*!< User-defined models receive messages from peer devices (e.g. get, set, status, etc) event */ 2198 ESP_BLE_MESH_MODEL_SEND_COMP_EVT, /*!< User-defined models send messages completion event */ 2199 ESP_BLE_MESH_MODEL_PUBLISH_COMP_EVT, /*!< User-defined models publish messages completion event */ 2200 ESP_BLE_MESH_CLIENT_MODEL_RECV_PUBLISH_MSG_EVT, /*!< User-defined client models receive publish messages event */ 2201 ESP_BLE_MESH_CLIENT_MODEL_SEND_TIMEOUT_EVT, /*!< Timeout event for the user-defined client models that failed to receive response from peer server models */ 2202 ESP_BLE_MESH_MODEL_PUBLISH_UPDATE_EVT, /*!< When a model is configured to publish messages periodically, this event will occur during every publish period */ 2203 ESP_BLE_MESH_SERVER_MODEL_UPDATE_STATE_COMP_EVT, /*!< Server models update state value completion event */ 2204 ESP_BLE_MESH_MODEL_EVT_MAX, 2205 } esp_ble_mesh_model_cb_event_t; 2206 2207 /** 2208 * @brief BLE Mesh model callback parameters union 2209 */ 2210 typedef union { 2211 /** 2212 * @brief ESP_BLE_MESH_MODEL_OPERATION_EVT 2213 */ 2214 struct ble_mesh_model_operation_evt_param { 2215 uint32_t opcode; /*!< Opcode of the received message */ 2216 esp_ble_mesh_model_t *model; /*!< Pointer to the model which receives the message */ 2217 esp_ble_mesh_msg_ctx_t *ctx; /*!< Pointer to the context of the received message */ 2218 uint16_t length; /*!< Length of the received message */ 2219 uint8_t *msg; /*!< Value of the received message */ 2220 } model_operation; /*!< Event parameter of ESP_BLE_MESH_MODEL_OPERATION_EVT */ 2221 /** 2222 * @brief ESP_BLE_MESH_MODEL_SEND_COMP_EVT 2223 */ 2224 struct ble_mesh_model_send_comp_param { 2225 int err_code; /*!< Indicate the result of sending a message */ 2226 uint32_t opcode; /*!< Opcode of the message */ 2227 esp_ble_mesh_model_t *model; /*!< Pointer to the model which sends the message */ 2228 esp_ble_mesh_msg_ctx_t *ctx; /*!< Context of the message */ 2229 } model_send_comp; /*!< Event parameter of ESP_BLE_MESH_MODEL_SEND_COMP_EVT */ 2230 /** 2231 * @brief ESP_BLE_MESH_MODEL_PUBLISH_COMP_EVT 2232 */ 2233 struct ble_mesh_model_publish_comp_param { 2234 int err_code; /*!< Indicate the result of publishing a message */ 2235 esp_ble_mesh_model_t *model; /*!< Pointer to the model which publishes the message */ 2236 } model_publish_comp; /*!< Event parameter of ESP_BLE_MESH_MODEL_PUBLISH_COMP_EVT */ 2237 /** 2238 * @brief ESP_BLE_MESH_CLIENT_MODEL_RECV_PUBLISH_MSG_EVT 2239 */ 2240 struct ble_mesh_mod_recv_publish_msg_param { 2241 uint32_t opcode; /*!< Opcode of the unsolicited received message */ 2242 esp_ble_mesh_model_t *model; /*!< Pointer to the model which receives the message */ 2243 esp_ble_mesh_msg_ctx_t *ctx; /*!< Pointer to the context of the message */ 2244 uint16_t length; /*!< Length of the received message */ 2245 uint8_t *msg; /*!< Value of the received message */ 2246 } client_recv_publish_msg; /*!< Event parameter of ESP_BLE_MESH_CLIENT_MODEL_RECV_PUBLISH_MSG_EVT */ 2247 /** 2248 * @brief ESP_BLE_MESH_CLIENT_MODEL_SEND_TIMEOUT_EVT 2249 */ 2250 struct ble_mesh_client_model_send_timeout_param { 2251 uint32_t opcode; /*!< Opcode of the previously sent message */ 2252 esp_ble_mesh_model_t *model; /*!< Pointer to the model which sends the previous message */ 2253 esp_ble_mesh_msg_ctx_t *ctx; /*!< Pointer to the context of the previous message */ 2254 } client_send_timeout; /*!< Event parameter of ESP_BLE_MESH_CLIENT_MODEL_SEND_TIMEOUT_EVT */ 2255 /** 2256 * @brief ESP_BLE_MESH_MODEL_PUBLISH_UPDATE_EVT 2257 */ 2258 struct ble_mesh_model_publish_update_evt_param { 2259 esp_ble_mesh_model_t *model; /*!< Pointer to the model which is going to update its publish message */ 2260 } model_publish_update; /*!< Event parameter of ESP_BLE_MESH_MODEL_PUBLISH_UPDATE_EVT */ 2261 /** 2262 * @brief ESP_BLE_MESH_SERVER_MODEL_UPDATE_STATE_COMP_EVT 2263 */ 2264 struct ble_mesh_server_model_update_state_comp_param { 2265 int err_code; /*!< Indicate the result of updating server model state */ 2266 esp_ble_mesh_model_t *model; /*!< Pointer to the server model which state value is updated */ 2267 esp_ble_mesh_server_state_type_t type; /*!< Type of the updated server state */ 2268 } server_model_update_state; /*!< Event parameter of ESP_BLE_MESH_SERVER_MODEL_UPDATE_STATE_COMP_EVT */ 2269 } esp_ble_mesh_model_cb_param_t; 2270 2271 #ifdef __cplusplus 2272 } 2273 #endif 2274 2275 #endif /* _ESP_BLE_MESH_DEFS_H_ */ 2276
