1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * this file contains the PORT API definitions 22 * 23 ******************************************************************************/ 24 #ifndef PORT_API_H 25 #define PORT_API_H 26 27 #include "common/bt_target.h" 28 #include "common/bt_defs.h" 29 30 /***************************************************************************** 31 ** Constants and Types 32 *****************************************************************************/ 33 34 /* 35 ** Define port settings structure send from the application in the 36 ** set settings request, or to the application in the set settings indication. 37 */ 38 typedef struct { 39 40 #define PORT_BAUD_RATE_2400 0x00 41 #define PORT_BAUD_RATE_4800 0x01 42 #define PORT_BAUD_RATE_7200 0x02 43 #define PORT_BAUD_RATE_9600 0x03 44 #define PORT_BAUD_RATE_19200 0x04 45 #define PORT_BAUD_RATE_38400 0x05 46 #define PORT_BAUD_RATE_57600 0x06 47 #define PORT_BAUD_RATE_115200 0x07 48 #define PORT_BAUD_RATE_230400 0x08 49 50 UINT8 baud_rate; 51 52 #define PORT_5_BITS 0x00 53 #define PORT_6_BITS 0x01 54 #define PORT_7_BITS 0x02 55 #define PORT_8_BITS 0x03 56 57 UINT8 byte_size; 58 59 #define PORT_ONESTOPBIT 0x00 60 #define PORT_ONE5STOPBITS 0x01 61 UINT8 stop_bits; 62 63 #define PORT_PARITY_NO 0x00 64 #define PORT_PARITY_YES 0x01 65 UINT8 parity; 66 67 #define PORT_ODD_PARITY 0x00 68 #define PORT_EVEN_PARITY 0x01 69 #define PORT_MARK_PARITY 0x02 70 #define PORT_SPACE_PARITY 0x03 71 72 UINT8 parity_type; 73 74 #define PORT_FC_OFF 0x00 75 #define PORT_FC_XONXOFF_ON_INPUT 0x01 76 #define PORT_FC_XONXOFF_ON_OUTPUT 0x02 77 #define PORT_FC_CTS_ON_INPUT 0x04 78 #define PORT_FC_CTS_ON_OUTPUT 0x08 79 #define PORT_FC_DSR_ON_INPUT 0x10 80 #define PORT_FC_DSR_ON_OUTPUT 0x20 81 82 UINT8 fc_type; 83 84 UINT8 rx_char1; 85 86 #define PORT_XON_DC1 0x11 87 UINT8 xon_char; 88 89 #define PORT_XOFF_DC3 0x13 90 UINT8 xoff_char; 91 92 } tPORT_STATE; 93 94 95 /* 96 ** Define the callback function prototypes. Parameters are specific 97 ** to each event and are described bellow 98 */ 99 typedef int (tPORT_DATA_CALLBACK) (UINT16 port_handle, void *p_data, UINT16 len); 100 101 #define DATA_CO_CALLBACK_TYPE_INCOMING 1 102 #define DATA_CO_CALLBACK_TYPE_OUTGOING_SIZE 2 103 #define DATA_CO_CALLBACK_TYPE_OUTGOING 3 104 typedef int (tPORT_DATA_CO_CALLBACK) (UINT16 port_handle, UINT8 *p_buf, UINT16 len, int type); 105 106 typedef void (tPORT_CALLBACK) (UINT32 code, UINT16 port_handle); 107 108 typedef void (tPORT_MGMT_CALLBACK) (UINT32 code, UINT16 port_handle, void* data); 109 110 /** 111 * Define the server port manage callback function argument 112 */ 113 typedef struct { 114 BOOLEAN accept; /* If upper layer accepts the incoming connection */ 115 BOOLEAN ignore_rfc_state; /* If need to ignore rfc state for PORT_CheckConnection */ 116 } tPORT_MGMT_SR_CALLBACK_ARG; 117 118 /* 119 ** Define events that registered application can receive in the callback 120 */ 121 122 #define PORT_EV_RXCHAR 0x00000001 /* Any Character received */ 123 #define PORT_EV_RXFLAG 0x00000002 /* Received certain character */ 124 #define PORT_EV_TXEMPTY 0x00000004 /* Transmitt Queue Empty */ 125 #define PORT_EV_CTS 0x00000008 /* CTS changed state */ 126 #define PORT_EV_DSR 0x00000010 /* DSR changed state */ 127 #define PORT_EV_RLSD 0x00000020 /* RLSD changed state */ 128 #define PORT_EV_BREAK 0x00000040 /* BREAK received */ 129 #define PORT_EV_ERR 0x00000080 /* Line status error occurred */ 130 #define PORT_EV_RING 0x00000100 /* Ring signal detected */ 131 #define PORT_EV_CTSS 0x00000400 /* CTS state */ 132 #define PORT_EV_DSRS 0x00000800 /* DSR state */ 133 #define PORT_EV_RLSDS 0x00001000 /* RLSD state */ 134 #define PORT_EV_OVERRUN 0x00002000 /* receiver buffer overrun */ 135 #define PORT_EV_TXCHAR 0x00004000 /* Any character transmitted */ 136 137 #define PORT_EV_CONNECTED 0x00000200 /* RFCOMM connection established */ 138 #define PORT_EV_CONNECT_ERR 0x00008000 /* Was not able to establish connection */ 139 /* or disconnected */ 140 #define PORT_EV_FC 0x00010000 /* data flow enabled flag changed by remote */ 141 #define PORT_EV_FCS 0x00020000 /* data flow enable status true = enabled */ 142 143 /* 144 ** To register for events application should provide bitmask with 145 ** corresponding bit set 146 */ 147 148 #define PORT_MASK_ALL (PORT_EV_RXCHAR | PORT_EV_TXEMPTY | PORT_EV_CTS | \ 149 PORT_EV_DSR | PORT_EV_RLSD | PORT_EV_BREAK | \ 150 PORT_EV_ERR | PORT_EV_RING | PORT_EV_CONNECT_ERR | \ 151 PORT_EV_DSRS | PORT_EV_CTSS | PORT_EV_RLSDS | \ 152 PORT_EV_RXFLAG | PORT_EV_TXCHAR | PORT_EV_OVERRUN | \ 153 PORT_EV_FC | PORT_EV_FCS | PORT_EV_CONNECTED) 154 155 156 /* 157 ** Define port result codes 158 */ 159 #define PORT_SUCCESS 0 160 161 #define PORT_ERR_BASE 0 162 163 #define PORT_UNKNOWN_ERROR (PORT_ERR_BASE + 1) 164 #define PORT_ALREADY_OPENED (PORT_ERR_BASE + 2) 165 #define PORT_CMD_PENDING (PORT_ERR_BASE + 3) 166 #define PORT_APP_NOT_REGISTERED (PORT_ERR_BASE + 4) 167 #define PORT_NO_MEM (PORT_ERR_BASE + 5) 168 #define PORT_NO_RESOURCES (PORT_ERR_BASE + 6) 169 #define PORT_BAD_BD_ADDR (PORT_ERR_BASE + 7) 170 #define PORT_BAD_HANDLE (PORT_ERR_BASE + 9) 171 #define PORT_NOT_OPENED (PORT_ERR_BASE + 10) 172 #define PORT_LINE_ERR (PORT_ERR_BASE + 11) 173 #define PORT_START_FAILED (PORT_ERR_BASE + 12) 174 #define PORT_PAR_NEG_FAILED (PORT_ERR_BASE + 13) 175 #define PORT_PORT_NEG_FAILED (PORT_ERR_BASE + 14) 176 #define PORT_SEC_FAILED (PORT_ERR_BASE + 15) 177 #define PORT_PEER_CONNECTION_FAILED (PORT_ERR_BASE + 16) 178 #define PORT_PEER_FAILED (PORT_ERR_BASE + 17) 179 #define PORT_PEER_TIMEOUT (PORT_ERR_BASE + 18) 180 #define PORT_CLOSED (PORT_ERR_BASE + 19) 181 #define PORT_TX_FULL (PORT_ERR_BASE + 20) 182 #define PORT_LOCAL_CLOSED (PORT_ERR_BASE + 21) 183 #define PORT_LOCAL_TIMEOUT (PORT_ERR_BASE + 22) 184 #define PORT_TX_QUEUE_DISABLED (PORT_ERR_BASE + 23) 185 #define PORT_PAGE_TIMEOUT (PORT_ERR_BASE + 24) 186 #define PORT_INVALID_SCN (PORT_ERR_BASE + 25) 187 188 #define PORT_ERR_MAX (PORT_ERR_BASE + 26) 189 190 /***************************************************************************** 191 ** External Function Declarations 192 *****************************************************************************/ 193 #ifdef __cplusplus 194 extern "C" 195 { 196 #endif 197 198 /******************************************************************************* 199 ** 200 ** Function RFCOMM_CreateConnection 201 ** 202 ** Description RFCOMM_CreateConnection function is used from the application 203 ** to establish serial port connection to the peer device, 204 ** or allow RFCOMM to accept a connection from the peer 205 ** application. 206 ** 207 ** Parameters: scn - Service Channel Number as registered with 208 ** the SDP (server) or obtained using SDP from 209 ** the peer device (client). 210 ** is_server - TRUE if requesting application is a server 211 ** mtu - Maximum frame size the application can accept 212 ** bd_addr - BD_ADDR of the peer (client) 213 ** mask - specifies events to be enabled. A value 214 ** of zero disables all events. 215 ** p_handle - OUT pointer to the handle. 216 ** p_mgmt_cb - pointer to callback function to receive 217 ** connection up/down events. 218 ** Notes: 219 ** 220 ** Server can call this function with the same scn parameter multiple times if 221 ** it is ready to accept multiple simulteneous connections. 222 ** 223 ** DLCI for the connection is (scn * 2 + 1) if client originates connection on 224 ** existing none initiator multiplexer channel. Otherwise it is (scn * 2). 225 ** For the server DLCI can be changed later if client will be calling it using 226 ** (scn * 2 + 1) dlci. 227 ** 228 *******************************************************************************/ 229 extern int RFCOMM_CreateConnection (UINT16 uuid, UINT8 scn, 230 BOOLEAN is_server, UINT16 mtu, 231 BD_ADDR bd_addr, UINT16 *p_handle, 232 tPORT_MGMT_CALLBACK *p_mgmt_cb); 233 234 235 /******************************************************************************* 236 ** 237 ** Function RFCOMM_RemoveConnection 238 ** 239 ** Description This function is called to close the specified connection. 240 ** 241 ** Parameters: handle - Handle of the port returned in the Open 242 ** 243 *******************************************************************************/ 244 extern int RFCOMM_RemoveConnection (UINT16 handle); 245 246 247 /******************************************************************************* 248 ** 249 ** Function RFCOMM_RemoveServer 250 ** 251 ** Description This function is called to close the server port. 252 ** 253 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 254 ** 255 *******************************************************************************/ 256 extern int RFCOMM_RemoveServer (UINT16 handle); 257 258 259 /******************************************************************************* 260 ** 261 ** Function PORT_SetEventCallback 262 ** 263 ** Description Set event callback the specified connection. 264 ** 265 ** Parameters: handle - Handle of the port returned in the Open 266 ** p_callback - address of the callback function which should 267 ** be called from the RFCOMM when an event 268 ** specified in the mask occurs. 269 ** 270 *******************************************************************************/ 271 extern int PORT_SetEventCallback (UINT16 port_handle, 272 tPORT_CALLBACK *p_port_cb); 273 274 /******************************************************************************* 275 ** 276 ** Function PORT_ClearKeepHandleFlag 277 ** 278 ** Description This function is called to clear the keep handle flag 279 ** which will cause not to keep the port handle open when closed 280 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 281 ** 282 *******************************************************************************/ 283 int PORT_ClearKeepHandleFlag (UINT16 port_handle); 284 285 /******************************************************************************* 286 ** 287 ** Function PORT_SetEventCallback 288 ** 289 ** Description Set event data callback the specified connection. 290 ** 291 ** Parameters: handle - Handle of the port returned in the Open 292 ** p_callback - address of the callback function which should 293 ** be called from the RFCOMM when a data 294 ** packet is received. 295 ** 296 *******************************************************************************/ 297 extern int PORT_SetDataCallback (UINT16 port_handle, 298 tPORT_DATA_CALLBACK *p_cb); 299 300 extern int PORT_SetDataCOCallback (UINT16 port_handle, tPORT_DATA_CO_CALLBACK *p_port_cb); 301 /******************************************************************************* 302 ** 303 ** Function PORT_SetEventMask 304 ** 305 ** Description This function is called to close the specified connection. 306 ** 307 ** Parameters: handle - Handle of the port returned in the Open 308 ** mask - specifies events to be enabled. A value 309 ** of zero disables all events. 310 ** 311 *******************************************************************************/ 312 extern int PORT_SetEventMask (UINT16 port_handle, UINT32 mask); 313 314 315 /******************************************************************************* 316 ** 317 ** Function PORT_CheckConnection 318 ** 319 ** Description This function returns PORT_SUCCESS if connection referenced 320 ** by handle is up and running 321 ** 322 ** Parameters: handle - Handle of the port returned in the Open 323 ** ignore_rfc_state - If need to ignore rfc state 324 ** bd_addr - OUT bd_addr of the peer 325 ** p_lcid - OUT L2CAP's LCID 326 ** 327 *******************************************************************************/ 328 extern int PORT_CheckConnection (UINT16 handle, BOOLEAN ignore_rfc_state, BD_ADDR bd_addr, 329 UINT16 *p_lcid); 330 331 /******************************************************************************* 332 ** 333 ** Function PORT_IsOpening 334 ** 335 ** Description This function returns TRUE if there is any RFCOMM connection 336 ** opening in process. 337 ** 338 ** Parameters: TRUE if any connection opening is found 339 ** bd_addr - bd_addr of the peer 340 ** 341 *******************************************************************************/ 342 extern BOOLEAN PORT_IsOpening (BD_ADDR bd_addr); 343 344 /******************************************************************************* 345 ** 346 ** Function PORT_SetState 347 ** 348 ** Description This function configures connection according to the 349 ** specifications in the tPORT_STATE structure. 350 ** 351 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 352 ** p_settings - Pointer to a tPORT_STATE structure containing 353 ** configuration information for the connection. 354 ** 355 *******************************************************************************/ 356 extern int PORT_SetState (UINT16 handle, tPORT_STATE *p_settings); 357 358 /******************************************************************************* 359 ** 360 ** Function PORT_GetRxQueueCnt 361 ** 362 ** Description This function return number of buffers on the rx queue. 363 ** 364 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 365 ** p_rx_queue_count - Pointer to return queue count in. 366 ** 367 *******************************************************************************/ 368 extern int PORT_GetRxQueueCnt (UINT16 handle, UINT16 *p_rx_queue_count); 369 370 /******************************************************************************* 371 ** 372 ** Function PORT_GetState 373 ** 374 ** Description This function is called to fill tPORT_STATE structure 375 ** with the current control settings for the port 376 ** 377 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 378 ** p_settings - Pointer to a tPORT_STATE structure in which 379 ** configuration information is returned. 380 ** 381 *******************************************************************************/ 382 extern int PORT_GetState (UINT16 handle, tPORT_STATE *p_settings); 383 384 385 /******************************************************************************* 386 ** 387 ** Function PORT_Control 388 ** 389 ** Description This function directs a specified connection to pass control 390 ** control information to the peer device. 391 ** 392 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 393 ** signal - specify the function to be passed 394 ** 395 *******************************************************************************/ 396 #define PORT_SET_DTRDSR 0x01 397 #define PORT_CLR_DTRDSR 0x02 398 #define PORT_SET_CTSRTS 0x03 399 #define PORT_CLR_CTSRTS 0x04 400 #define PORT_SET_RI 0x05 /* DCE only */ 401 #define PORT_CLR_RI 0x06 /* DCE only */ 402 #define PORT_SET_DCD 0x07 /* DCE only */ 403 #define PORT_CLR_DCD 0x08 /* DCE only */ 404 #define PORT_BREAK 0x09 /* Break event */ 405 406 extern int PORT_Control (UINT16 handle, UINT8 signal); 407 408 409 /******************************************************************************* 410 ** 411 ** Function PORT_FlowControl 412 ** 413 ** Description This function directs a specified connection to pass 414 ** flow control message to the peer device. Enable flag passed 415 ** shows if port can accept more data. 416 ** 417 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 418 ** enable - enables data flow 419 ** 420 *******************************************************************************/ 421 extern int PORT_FlowControl (UINT16 handle, BOOLEAN enable); 422 423 /******************************************************************************* 424 ** 425 ** Function PORT_FlowControl_GiveCredit 426 ** 427 ** Description This function gives specified credits to the peer 428 ** 429 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 430 ** enable - enables data flow 431 ** credits_given - credits to give 432 ** 433 *******************************************************************************/ 434 extern int PORT_FlowControl_GiveCredit (UINT16 handle, BOOLEAN enable, UINT16 credits_given); 435 /******************************************************************************* 436 ** 437 ** Function PORT_GetModemStatus 438 ** 439 ** Description This function retrieves modem control signals. Normally 440 ** application will call this function after a callback 441 ** function is called with notification that one of signals 442 ** has been changed. 443 ** 444 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 445 ** callback. 446 ** p_signal - specify the pointer to control signals info 447 ** 448 *******************************************************************************/ 449 #define PORT_DTRDSR_ON 0x01 450 #define PORT_CTSRTS_ON 0x02 451 #define PORT_RING_ON 0x04 452 #define PORT_DCD_ON 0x08 453 454 /* 455 ** Define default initial local modem signals state set after connection established 456 */ 457 #define PORT_OBEX_DEFAULT_SIGNAL_STATE (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON) 458 #define PORT_SPP_DEFAULT_SIGNAL_STATE (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON) 459 #define PORT_PPP_DEFAULT_SIGNAL_STATE (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON) 460 #define PORT_DUN_DEFAULT_SIGNAL_STATE (PORT_DTRDSR_ON | PORT_CTSRTS_ON) 461 462 extern int PORT_GetModemStatus (UINT16 handle, UINT8 *p_control_signal); 463 464 465 /******************************************************************************* 466 ** 467 ** Function PORT_ClearError 468 ** 469 ** Description This function retreives information about a communications 470 ** error and reports current status of a connection. The 471 ** function should be called when an error occures to clear 472 ** the connection error flag and to enable additional read 473 ** and write operations. 474 ** 475 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 476 ** p_errors - pointer of the variable to receive error codes 477 ** p_status - pointer to the tPORT_STATUS structur to receive 478 ** connection status 479 ** 480 *******************************************************************************/ 481 482 #define PORT_ERR_BREAK 0x01 /* Break condition occured on the peer device */ 483 #define PORT_ERR_OVERRUN 0x02 /* Overrun is reported by peer device */ 484 #define PORT_ERR_FRAME 0x04 /* Framing error reported by peer device */ 485 #define PORT_ERR_RXOVER 0x08 /* Input queue overflow occured */ 486 #define PORT_ERR_TXFULL 0x10 /* Output queue overflow occured */ 487 488 typedef struct { 489 #define PORT_FLAG_CTS_HOLD 0x01 /* Tx is waiting for CTS signal */ 490 #define PORT_FLAG_DSR_HOLD 0x02 /* Tx is waiting for DSR signal */ 491 #define PORT_FLAG_RLSD_HOLD 0x04 /* Tx is waiting for RLSD signal */ 492 493 UINT16 flags; 494 UINT16 in_queue_size; /* Number of bytes in the input queue */ 495 UINT16 out_queue_size; /* Number of bytes in the output queue */ 496 UINT16 mtu_size; /* peer MTU size */ 497 } tPORT_STATUS; 498 499 500 extern int PORT_ClearError (UINT16 handle, UINT16 *p_errors, 501 tPORT_STATUS *p_status); 502 503 504 /******************************************************************************* 505 ** 506 ** Function PORT_SendError 507 ** 508 ** Description This function send a communications error to the peer device 509 ** 510 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 511 ** errors - receive error codes 512 ** 513 *******************************************************************************/ 514 extern int PORT_SendError (UINT16 handle, UINT8 errors); 515 516 517 /******************************************************************************* 518 ** 519 ** Function PORT_GetQueueStatus 520 ** 521 ** Description This function reports current status of a connection. 522 ** 523 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 524 ** p_status - pointer to the tPORT_STATUS structur to receive 525 ** connection status 526 ** 527 *******************************************************************************/ 528 extern int PORT_GetQueueStatus (UINT16 handle, tPORT_STATUS *p_status); 529 530 531 /******************************************************************************* 532 ** 533 ** Function PORT_Purge 534 ** 535 ** Description This function discards all the data from the output or 536 ** input queues of the specified connection. 537 ** 538 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 539 ** purge_flags - specify the action to take. 540 ** 541 *******************************************************************************/ 542 #define PORT_PURGE_TXCLEAR 0x01 543 #define PORT_PURGE_RXCLEAR 0x02 544 545 extern int PORT_Purge (UINT16 handle, UINT8 purge_flags); 546 547 548 /******************************************************************************* 549 ** 550 ** Function PORT_Read 551 ** 552 ** Description This function returns the pointer to the buffer received 553 ** from the peer device. Normally application will call this 554 ** function after receiving PORT_EVT_RXCHAR event. 555 ** Application calling this function is responsible to free 556 ** buffer returned. 557 ** 558 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 559 ** callback. 560 ** pp_buf - pointer to address of buffer with data, 561 ** 562 *******************************************************************************/ 563 extern int PORT_Read (UINT16 handle, BT_HDR **pp_buf); 564 565 566 /******************************************************************************* 567 ** 568 ** Function PORT_ReadData 569 ** 570 ** Description Normally application will call this function after receiving 571 ** PORT_EVT_RXCHAR event. 572 ** 573 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 574 ** callback. 575 ** p_data - Data area 576 ** max_len - Byte count requested 577 ** p_len - Byte count received 578 ** 579 *******************************************************************************/ 580 extern int PORT_ReadData (UINT16 handle, char *p_data, UINT16 max_len, 581 UINT16 *p_len); 582 583 584 /******************************************************************************* 585 ** 586 ** Function PORT_Write 587 ** 588 ** Description This function to send BT buffer to the peer device. 589 ** Application should not free the buffer. 590 ** 591 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 592 ** p_buf - pointer to the buffer with data, 593 ** 594 *******************************************************************************/ 595 extern int PORT_Write (UINT16 handle, BT_HDR *p_buf); 596 597 598 /******************************************************************************* 599 ** 600 ** Function PORT_WriteData 601 ** 602 ** Description This function is called from the legacy application to 603 ** send data. 604 ** 605 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 606 ** p_data - Data area 607 ** max_len - Byte count to write 608 ** p_len - Bytes written 609 ** 610 *******************************************************************************/ 611 extern int PORT_WriteData (UINT16 handle, char *p_data, UINT16 max_len, 612 UINT16 *p_len); 613 614 /******************************************************************************* 615 ** 616 ** Function PORT_WriteDataCO 617 ** 618 ** Description Normally not GKI aware application will call this function 619 ** to send data to the port by callout functions. 620 ** 621 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 622 ** 623 *******************************************************************************/ 624 extern int PORT_WriteDataCO (UINT16 handle, int *p_len, int len, UINT8 *p_data); 625 626 /******************************************************************************* 627 ** 628 ** Function PORT_Test 629 ** 630 ** Description Application can call this function to send RFCOMM Test frame 631 ** 632 ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection 633 ** p_data - Data area 634 ** max_len - Byte count requested 635 ** 636 *******************************************************************************/ 637 extern int PORT_Test (UINT16 handle, UINT8 *p_data, UINT16 len); 638 639 640 /******************************************************************************* 641 ** 642 ** Function RFCOMM_Init 643 ** 644 ** Description This function is called to initialize RFCOMM layer 645 ** 646 *******************************************************************************/ 647 extern bt_status_t RFCOMM_Init (void); 648 649 /******************************************************************************* 650 ** 651 ** Function RFCOMM_Deinit 652 ** 653 ** Description This function is called to deinitialize the control block 654 ** for this layer. 655 ** 656 ** Returns void 657 ** 658 *******************************************************************************/ 659 extern void RFCOMM_Deinit(void); 660 661 /******************************************************************************* 662 ** 663 ** Function PORT_SetTraceLevel 664 ** 665 ** Description This function sets the trace level for RFCOMM. If called with 666 ** a value of 0xFF, it simply reads the current trace level. 667 ** 668 ** Returns the new (current) trace level 669 ** 670 *******************************************************************************/ 671 extern UINT8 PORT_SetTraceLevel (UINT8 new_level); 672 673 674 /******************************************************************************* 675 ** 676 ** Function PORT_GetResultString 677 ** 678 ** Description This function returns the human-readable string for a given 679 ** result code. 680 ** 681 ** Returns a pointer to the human-readable string for the given 682 ** result. Note that the string returned must not be freed. 683 ** 684 *******************************************************************************/ 685 extern const char *PORT_GetResultString (const uint8_t result_code); 686 687 #ifdef __cplusplus 688 } 689 #endif 690 691 #endif /* PORT_API_H */ 692
