| /Zephyr-latest/drivers/watchdog/ |
| D | wdt_npm6001.c | 55 return i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_disable()
84 ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_install_timeout()
91 ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_install_timeout()
99 ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_install_timeout()
106 ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_install_timeout()
113 ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_install_timeout()
120 ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_install_timeout()
128 ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_install_timeout()
135 ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_install_timeout()
142 ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); in wdt_npm6001_install_timeout()
[all …]
|
| /Zephyr-latest/drivers/misc/grove_lcd_rgb/ |
| D | grove_lcd_rgb.c | 90 i2c_write_dt(&config->bus, buf, sizeof(buf)); in glcd_print()
110 i2c_write_dt(&config->bus, data, 2); in glcd_cursor_pos_set()
119 i2c_write_dt(&config->bus, clear, sizeof(clear)); in glcd_clear()
134 i2c_write_dt(&config->bus, buf, sizeof(buf)); in glcd_display_state_set()
158 i2c_write_dt(&config->bus, buf, sizeof(buf)); in glcd_input_state_set()
202 i2c_write_dt(&config->bus, buf, sizeof(buf)); in glcd_function_set()
|
| /Zephyr-latest/tests/boards/mec15xxevb_assy6853/i2c_api/src/ |
| D | main.c | 45 ret = i2c_write_dt(&i2c, datas, 3); in ZTEST()
51 ret = i2c_write_dt(&i2c, datas, 1); in ZTEST()
|
| /Zephyr-latest/tests/boards/mec172xevb_assy6906/i2c_api/src/ |
| D | main.c | 45 ret = i2c_write_dt(&i2c, datas, 3); in ZTEST()
51 ret = i2c_write_dt(&i2c, datas, 1); in ZTEST()
|
| /Zephyr-latest/drivers/led/ |
| D | ht16k33.c | 119 if (i2c_write_dt(&config->i2c, &cmd, sizeof(cmd))) { in ht16k33_led_blink()
146 if (i2c_write_dt(&config->i2c, &cmd, sizeof(cmd))) { in ht16k33_led_set_brightness()
181 if (i2c_write_dt(&config->i2c, cmd, sizeof(cmd))) { in ht16k33_led_set_state()
312 err = i2c_write_dt(&config->i2c, cmd, 1); in ht16k33_init()
322 err = i2c_write_dt(&config->i2c, cmd, sizeof(cmd)); in ht16k33_init()
330 err = i2c_write_dt(&config->i2c, cmd, 1); in ht16k33_init()
338 err = i2c_write_dt(&config->i2c, cmd, 1); in ht16k33_init()
374 if (i2c_write_dt(&config->i2c, cmd, 1)) { in ht16k33_init()
397 if (i2c_write_dt(&config->i2c, cmd, 1)) { in ht16k33_init()
|
| D | lp50xx.c | 138 return i2c_write_dt(&config->bus, buf, sizeof(buf)); in lp50xx_set_brightness()
177 return i2c_write_dt(&config->bus, buf, sizeof(buf)); in lp50xx_set_color()
203 return i2c_write_dt(&config->bus, data->chan_buf, num_channels + 1); in lp50xx_write_channels()
215 err = i2c_write_dt(&config->bus, buf, 2); in lp50xx_reset()
231 return i2c_write_dt(&config->bus, buf, 2); in lp50xx_reset()
|
| /Zephyr-latest/drivers/auxdisplay/ |
| D | auxdisplay_jhd1313.c | 102 rc = i2c_write_dt(&config->bus, buf, sizeof(buf)); in auxdisplay_jhd1313_print()
128 return i2c_write_dt(&config->bus, data, 2); in auxdisplay_jhd1313_cursor_position_set()
137 rc = i2c_write_dt(&config->bus, clear, sizeof(clear)); in auxdisplay_jhd1313_clear()
164 rc = i2c_write_dt(&config->bus, buf, sizeof(buf)); in auxdisplay_jhd1313_update_display_state()
199 i2c_write_dt(&config->bus, buf, sizeof(buf)); in auxdisplay_jhd1313_input_state_set()
240 i2c_write_dt(&config->bus, buf, sizeof(buf)); in auxdisplay_jhd1313_function_set()
|
| D | auxdisplay_serlcd.c | 104 int rc = i2c_write_dt(&config->bus, buffer, sizeof(buffer)); in auxdisplay_serlcd_send_command()
117 int rc = i2c_write_dt(&config->bus, buffer, sizeof(buffer)); in auxdisplay_serlcd_send_special_command()
309 rc = i2c_write_dt(&config->bus, &buffer, sizeof(buffer)); in auxdisplay_serlcd_custom_character_set()
365 rc = i2c_write_dt(&config->bus, text, len); in auxdisplay_serlcd_write()
|
| /Zephyr-latest/drivers/input/ |
| D | input_nunchuk.c | 42 ret = i2c_write_dt(&cfg->i2c_bus, &value, sizeof(value)); in nunchuk_read_registers()
119 ret = i2c_write_dt(&cfg->i2c_bus, init_seq_1, sizeof(init_seq_1)); in nunchuk_init()
126 ret = i2c_write_dt(&cfg->i2c_bus, init_seq_2, sizeof(init_seq_2)); in nunchuk_init()
|
| /Zephyr-latest/drivers/gpio/ |
| D | gpio_npm6001.c | 77 return i2c_write_dt(&config->bus, buf, sizeof(buf)); in gpio_npm6001_port_set_bits_raw()
90 return i2c_write_dt(&config->bus, buf, sizeof(buf)); in gpio_npm6001_port_clear_bits_raw()
162 return i2c_write_dt(&config->bus, buf, sizeof(buf)); in gpio_npm6001_configure()
|
| D | gpio_sx1509b.c | 167 return i2c_write_dt(bus, tx_buf, 3); in i2c_reg_write_word_be()
185 return i2c_write_dt(bus, tx_buf, 2); in i2c_reg_write_byte_be()
267 rc = i2c_write_dt(&cfg->bus, &pin_buf.reg, in write_pin_state()
271 rc = i2c_write_dt(&cfg->bus, &pin_buf.reg, sizeof(pin_buf)); in write_pin_state()
373 rc = i2c_write_dt(&cfg->bus, &debounce_buf.reg, in sx1509b_config()
526 rc = i2c_write_dt(&cfg->bus, &irq_buf.reg, sizeof(irq_buf)); in pin_interrupt_configure()
|
| /Zephyr-latest/drivers/sensor/microchip/tcn75a/ |
| D | tcn75a.c | 30 ret = i2c_write_dt(&config->i2c_spec, adc_conf, 2); in tcn75a_sample_fetch()
115 return i2c_write_dt(&config->i2c_spec, adc_conf, 2); in tcn75a_init()
|
| /Zephyr-latest/drivers/sensor/jedec/jc42/ |
| D | jc42.c | 45 return i2c_write_dt(&cfg->i2c, buf, sizeof(buf)); in jc42_reg_write_16bit()
56 return i2c_write_dt(&cfg->i2c, buf, sizeof(buf)); in jc42_reg_write_8bit()
|
| /Zephyr-latest/drivers/sensor/ti/ina23x/ |
| D | ina23x_common.c | 48 return i2c_write_dt(bus, tx_buf, sizeof(tx_buf)); in ina23x_reg_write()
|
| /Zephyr-latest/drivers/sensor/memsic/mmc56x3/ |
| D | mmc56x3_i2c.c | 34 return i2c_write_dt(&bus->i2c, buf, size); in mmc56x3_raw_write_i2c()
|
| /Zephyr-latest/drivers/w1/ |
| D | w1_ds2477_85_common.c | 29 ret = i2c_write_dt(&cfg->i2c_spec, buf, (CMD_WR_W1_PORT_CFG_LEN + CMD_OVERHEAD_LEN)); in ds2477_85_write_port_config()
55 ret = i2c_write_dt(&cfg->i2c_spec, buf, (CMD_RD_W1_PORT_CFG_LEN + CMD_OVERHEAD_LEN)); in ds2477_85_read_port_config()
81 ret = i2c_write_dt(&cfg->i2c_spec, buf, 1); in ds2477_85_reset_master()
244 ret = i2c_write_dt(&cfg->i2c_spec, buf, (CMD_RD_BLOCK_LEN + CMD_OVERHEAD_LEN)); in ds2477_85_read_block()
|
| /Zephyr-latest/drivers/rtc/ |
| D | rtc_rv8263.c | 113 err = i2c_write_dt(&config->i2c_bus, buf, 2); in rv8263c8_update_disable_timer()
119 return i2c_write_dt(&config->i2c_bus, buf, 2); in rv8263c8_update_disable_timer()
147 err = i2c_write_dt(&config->i2c_bus, buf, 2); in rv8263c8_update_enable_timer()
155 return i2c_write_dt(&config->i2c_bus, buf, 2); in rv8263c8_update_enable_timer()
226 return i2c_write_dt(&config->i2c_bus, regs, sizeof(regs)); in rv8263c8_time_set()
325 err = i2c_write_dt(&config->i2c_bus, buf, 2); in rv8263c8_init()
454 err = i2c_write_dt(&config->i2c_bus, regs, sizeof(regs)); in rv8263c8_alarm_set_time()
|
| /Zephyr-latest/drivers/sensor/ams/ccs811/ |
| D | ccs811.c | 150 rc = i2c_write_dt(&config->i2c, buf, sizeof(buf)); in ccs811_baseline_update()
218 rc = i2c_write_dt(&config->i2c, buf, sizeof(buf)); in ccs811_envdata_update()
343 if (i2c_write_dt(&config->i2c, &buf, 1) < 0) { in switch_to_app_mode()
417 rc = i2c_write_dt(&config->i2c, buf, sizeof(buf)); in ccs811_set_thresholds()
489 if (i2c_write_dt(&config->i2c, reset_seq, sizeof(reset_seq)) < 0) { in ccs811_init()
|
| /Zephyr-latest/drivers/sensor/aosong/dht20/ |
| D | dht20.c | 78 rc = i2c_write_dt(&cfg->bus, tx_buf, sizeof(tx_buf)); in read_status()
113 rc = i2c_write_dt(&cfg->bus, tx_buf, sizeof(tx_buf)); in reset_register()
221 rc = i2c_write_dt(&cfg->bus, tx_buf, sizeof(tx_buf)); in dht20_sample_fetch()
|
| /Zephyr-latest/drivers/sensor/tdk/icp10125/ |
| D | icp10125.c | 155 rc = i2c_write_dt(&cfg->i2c, (uint8_t *)&otp_read_setup, sizeof(otp_read_setup)); in icp10125_read_otp()
162 rc = i2c_write_dt(&cfg->i2c, (uint8_t *)&otp_read_request_cmd, in icp10125_read_otp()
197 rc = i2c_write_dt(i2c, (uint8_t *)&cmds[mode], sizeof(cmds[mode])); in icp10125_measure()
|
| /Zephyr-latest/drivers/sensor/meas/ms5607/ |
| D | ms5607_i2c.c | 22 return i2c_write_dt(&config->bus_cfg.i2c, &cmd, 1); in ms5607_i2c_raw_cmd()
|
| /Zephyr-latest/drivers/sensor/sensirion/sht3xd/ |
| D | sht3xd.c | 60 return i2c_write_dt(&config->bus, tx_buf, sizeof(tx_buf)); in sht3xd_write_command()
72 return i2c_write_dt(&config->bus, tx_buf, sizeof(tx_buf)); in sht3xd_write_reg()
|
| /Zephyr-latest/drivers/pwm/ |
| D | pwm_max31790.c | 222 result = i2c_write_dt(&config->i2c, buffer, sizeof(buffer)); in max31790_set_cycles_internal()
229 result = i2c_write_dt(&config->i2c, buffer, sizeof(buffer)); in max31790_set_cycles_internal()
254 result = i2c_write_dt(&config->i2c, buffer, sizeof(buffer)); in max31790_set_cycles_internal()
|
| /Zephyr-latest/drivers/sensor/ens160/ |
| D | ens160_i2c.c | 46 return i2c_write_dt(&config->i2c, buff, sizeof(buff)); in ens160_write_data_i2c()
|
| /Zephyr-latest/drivers/mfd/ |
| D | mfd_ad559x_i2c.c | 28 return i2c_write_dt(&config->i2c, val, len); in mfd_ad559x_i2c_write_raw()
|
