Searched refs:blinking (Results 1 – 25 of 64) sorted by relevance
123
9 blinking demonstration.10 If set to 0, the short-cycle blinking demo will not be performed.17 blinking demonstration.18 If set to 0, the long-cycle blinking demo will not be performed.
13 The LED starts blinking at a 1 Hz frequency. The frequency doubles every 415 seconds until it returns to 1 Hz, completing a single blinking cycle. This16 faster-then-slower blinking cycle then repeats forever.18 Some PWM hardware cannot set the PWM period to 1 second to achieve the blinking76 After flashing, the sample starts blinking the LED as described above. It also
68 bool blinking; member160 if (data->blinking) { in auxdisplay_jhd1313_update_display_state()186 data->blinking = enabled; in auxdisplay_jhd1313_position_blinking_set_enabled()368 .blinking = false, \
58 bool blinking; member97 (data->blinking ? PT6314_DO_BLINKING_ON : 0); in auxdisplay_pt6314_display_on_off()156 data->blinking = enable; in auxdisplay_pt6314_position_blinking_set_enabled()323 .blinking = false, \
74 bool blinking; member134 if (data->blinking) { in auxdisplay_serlcd_send_display_state()172 data->blinking = enable; in auxdisplay_serlcd_position_blinking_set_enabled()
2 :name: Breathing-blinking LED (BBLED)11 breathing-blinking LED (BBLED) controllers. The SoC design is fixed84 The LEDs must be correctly described in the DTS. Each breathing-blinking LED
5 Use the Hardware Semaphore (HSEM) to trigger LED blinking from one core to another.
10 behavior in a basic blinking LED set up and STM32U5 STOP3 low power mode.
159 * hardware blinking is 250ms (i.e. "error" fast blink at 4 Hz).177 * blinking. In addition the PWM frequency must be as high as
11 behavior in a basic blinking LED set up using the :ref:`GPIO API <gpio_api>` in
12 behavior in a basic blinking LED set up you can enter in shutdown mode or in standbymode mode.
13 Reception is indicated by blinking the LED (if present) and output of
40 #. While the blue LED is blinking (for 5 seconds), touch the touch-pads with your finger.
10 behavior in a basic blinking LED set up using the :ref:`GPIO API <gpio_api>` in
36 through some physical behavior like blinking, playing a sound or vibrating.
90 You will see the LED blinking every second.
76 The LED should start blinking (color depending on the selected bitstream).
115 You should see the D13 LED blinking.
95 You will see the LED blinking every second.
36 - 1 white LED (SSD activity blinking).
138 You will see the LED blinking every second.
106 You should see the LED blinking every second.
135 You will see the LED blinking every second.
146 You will see the LED blinking every second.
129 You will see the LED blinking every second.
